Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
 help / color / mirror / Atom feed
* [FFmpeg-devel] [PATCH v3 1/4] lavu: Remove libva 1.x support
@ 2024-04-22 21:41 Mark Thompson
  2024-04-22 21:42 ` [FFmpeg-devel] [PATCH v3 2/4] lavc: " Mark Thompson
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Mark Thompson @ 2024-04-22 21:41 UTC (permalink / raw)
  To: FFmpeg development discussions and patches

libva 2.0 was released in 2017 and the 2.x versions are included in all
supported distributions nowadays.
---
Rebased.

I think we can also drop the other quirks?  They are for the proprietary media SDK driver (which I think is dead?) and the VDPAU wrapper (which I don't think was ever updated for libva 2?).


 libavutil/hwcontext_vaapi.c | 22 ----------------------
 1 file changed, 22 deletions(-)

diff --git a/libavutil/hwcontext_vaapi.c b/libavutil/hwcontext_vaapi.c
index 56d03aa4cd..84bcb78087 100644
--- a/libavutil/hwcontext_vaapi.c
+++ b/libavutil/hwcontext_vaapi.c
@@ -372,14 +372,6 @@ static const struct {
     const char *match_string;
     unsigned int quirks;
 } vaapi_driver_quirks_table[] = {
-#if !VA_CHECK_VERSION(1, 0, 0)
-    // The i965 driver did not conform before version 2.0.
-    {
-        "Intel i965 (Quick Sync)",
-        "i965",
-        AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS,
-    },
-#endif
     {
         "Intel iHD",
         "ubit",
@@ -1413,7 +1405,6 @@ fail:
 }
 #endif

-#if VA_CHECK_VERSION(0, 36, 0)
 typedef struct VAAPIDRMImageBufferMapping {
     VAImage      image;
     VABufferInfo buffer_info;
@@ -1573,7 +1564,6 @@ fail:
     av_freep(&mapping);
     return err;
 }
-#endif

 static int vaapi_map_to_drm(AVHWFramesContext *hwfc, AVFrame *dst,
                             const AVFrame *src, int flags)
@@ -1584,10 +1574,7 @@ static int vaapi_map_to_drm(AVHWFramesContext *hwfc, AVFrame *dst,
     if (err != AVERROR(ENOSYS))
         return err;
 #endif
-#if VA_CHECK_VERSION(0, 36, 0)
     return vaapi_map_to_drm_abh(hwfc, dst, src, flags);
-#endif
-    return AVERROR(ENOSYS);
 }

 #endif /* CONFIG_LIBDRM */
@@ -1637,7 +1624,6 @@ static void vaapi_device_free(AVHWDeviceContext *ctx)
     av_freep(&priv);
 }

-#if CONFIG_VAAPI_1
 static void vaapi_device_log_error(void *context, const char *message)
 {
     AVHWDeviceContext *ctx = context;
@@ -1651,7 +1637,6 @@ static void vaapi_device_log_info(void *context, const char *message)

     av_log(ctx, AV_LOG_VERBOSE, "libva: %s", message);
 }
-#endif

 static int vaapi_device_connect(AVHWDeviceContext *ctx,
                                 VADisplay display)
@@ -1660,10 +1645,8 @@ static int vaapi_device_connect(AVHWDeviceContext *ctx,
     int major, minor;
     VAStatus vas;

-#if CONFIG_VAAPI_1
     vaSetErrorCallback(display, &vaapi_device_log_error, ctx);
     vaSetInfoCallback (display, &vaapi_device_log_info,  ctx);
-#endif

     hwctx->display = display;

@@ -1907,7 +1890,6 @@ static int vaapi_device_create(AVHWDeviceContext *ctx, const char *device,

     ent = av_dict_get(opts, "driver", NULL, 0);
     if (ent) {
-#if VA_CHECK_VERSION(0, 38, 0)
         VAStatus vas;
         vas = vaSetDriverName(display, ent->value);
         if (vas != VA_STATUS_SUCCESS) {
@@ -1916,10 +1898,6 @@ static int vaapi_device_create(AVHWDeviceContext *ctx, const char *device,
             vaTerminate(display);
             return AVERROR_EXTERNAL;
         }
-#else
-        av_log(ctx, AV_LOG_WARNING, "Driver name setting is not "
-               "supported with this VAAPI version.\n");
-#endif
     }

     return vaapi_device_connect(ctx, display);
-- 
2.43.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [FFmpeg-devel] [PATCH v3 2/4] lavc: Remove libva 1.x support
  2024-04-22 21:41 [FFmpeg-devel] [PATCH v3 1/4] lavu: Remove libva 1.x support Mark Thompson
@ 2024-04-22 21:42 ` Mark Thompson
  2024-04-22 21:43 ` [FFmpeg-devel] [PATCH v3 3/4] lavfi: " Mark Thompson
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Mark Thompson @ 2024-04-22 21:42 UTC (permalink / raw)
  To: FFmpeg development discussions and patches

libva 2.0 was released in 2017 and the 2.x versions are included in all
supported distributions nowadays.
---
Fixed some orphaned labels.


 libavcodec/vaapi_decode.c      | 39 ++---------------
 libavcodec/vaapi_encode.c      | 78 ++++++----------------------------
 libavcodec/vaapi_encode.h      |  9 ----
 libavcodec/vaapi_encode_h264.c | 18 --------
 libavcodec/vaapi_encode_h265.c |  2 -
 5 files changed, 15 insertions(+), 131 deletions(-)

diff --git a/libavcodec/vaapi_decode.c b/libavcodec/vaapi_decode.c
index 21b273cd0f..ef1ea27a08 100644
--- a/libavcodec/vaapi_decode.c
+++ b/libavcodec/vaapi_decode.c
@@ -191,16 +191,10 @@ int ff_vaapi_decode_issue(AVCodecContext *avctx,
         av_log(avctx, AV_LOG_ERROR, "Failed to end picture decode "
                "issue: %d (%s).\n", vas, vaErrorStr(vas));
         err = AVERROR(EIO);
-        if (CONFIG_VAAPI_1 || ctx->hwctx->driver_quirks &
-            AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS)
-            goto fail;
-        else
-            goto fail_at_end;
+        goto fail;
     }

-    if (CONFIG_VAAPI_1 || ctx->hwctx->driver_quirks &
-        AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS)
-        ff_vaapi_decode_destroy_buffers(avctx, pic);
+    ff_vaapi_decode_destroy_buffers(avctx, pic);

     err = 0;
     goto exit;
@@ -213,7 +207,6 @@ fail_with_picture:
     }
 fail:
     ff_vaapi_decode_destroy_buffers(avctx, pic);
-fail_at_end:
 exit:
     pic->nb_param_buffers = 0;
     pic->nb_slices        = 0;
@@ -406,12 +399,10 @@ static const struct {
                            H264ConstrainedBaseline),
     MAP(H264,        H264_MAIN,       H264Main    ),
     MAP(H264,        H264_HIGH,       H264High    ),
-#if VA_CHECK_VERSION(0, 37, 0)
     MAP(HEVC,        HEVC_MAIN,       HEVCMain    ),
     MAP(HEVC,        HEVC_MAIN_10,    HEVCMain10  ),
     MAP(HEVC,        HEVC_MAIN_STILL_PICTURE,
                                       HEVCMain    ),
-#endif
 #if VA_CHECK_VERSION(1, 2, 0) && CONFIG_HEVC_VAAPI_HWACCEL
     MAP(HEVC,        HEVC_REXT,       None,
                  ff_vaapi_parse_hevc_rext_scc_profile ),
@@ -429,14 +420,10 @@ static const struct {
     MAP(VC1,         VC1_COMPLEX,     VC1Advanced ),
     MAP(VC1,         VC1_ADVANCED,    VC1Advanced ),
     MAP(VP8,         UNKNOWN,       VP8Version0_3 ),
-#if VA_CHECK_VERSION(0, 38, 0)
     MAP(VP9,         VP9_0,           VP9Profile0 ),
-#endif
-#if VA_CHECK_VERSION(0, 39, 0)
     MAP(VP9,         VP9_1,           VP9Profile1 ),
     MAP(VP9,         VP9_2,           VP9Profile2 ),
     MAP(VP9,         VP9_3,           VP9Profile3 ),
-#endif
 #if VA_CHECK_VERSION(1, 8, 0)
     MAP(AV1,         AV1_MAIN,        AV1Profile0),
     MAP(AV1,         AV1_HIGH,        AV1Profile1),
@@ -599,27 +586,7 @@ static int vaapi_decode_make_config(AVCodecContext *avctx,
         if (err < 0)
             goto fail;

-        if (CONFIG_VAAPI_1)
-            frames->initial_pool_size = 0;
-        else {
-            frames->initial_pool_size = 1;
-            // Add per-codec number of surfaces used for storing reference frames.
-            switch (avctx->codec_id) {
-            case AV_CODEC_ID_H264:
-            case AV_CODEC_ID_HEVC:
-            case AV_CODEC_ID_AV1:
-                frames->initial_pool_size += 16;
-                break;
-            case AV_CODEC_ID_VP9:
-                frames->initial_pool_size += 8;
-                break;
-            case AV_CODEC_ID_VP8:
-                frames->initial_pool_size += 3;
-                break;
-            default:
-                frames->initial_pool_size += 2;
-            }
-        }
+        frames->initial_pool_size = 0;
     }

     av_hwframe_constraints_free(&constraints);
diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c
index f54b2579ec..6f062e8277 100644
--- a/libavcodec/vaapi_encode.c
+++ b/libavcodec/vaapi_encode.c
@@ -530,7 +530,6 @@ static int vaapi_encode_issue(AVCodecContext *avctx,
         }
     }

-#if VA_CHECK_VERSION(1, 0, 0)
     sd = av_frame_get_side_data(pic->input_image,
                                 AV_FRAME_DATA_REGIONS_OF_INTEREST);
     if (sd && ctx->roi_allowed) {
@@ -593,7 +592,6 @@ static int vaapi_encode_issue(AVCodecContext *avctx,
         if (err < 0)
             goto fail;
     }
-#endif

     vas = vaBeginPicture(ctx->hwctx->display, ctx->va_context,
                          pic->input_surface);
@@ -618,26 +616,17 @@ static int vaapi_encode_issue(AVCodecContext *avctx,
         av_log(avctx, AV_LOG_ERROR, "Failed to end picture encode issue: "
                "%d (%s).\n", vas, vaErrorStr(vas));
         err = AVERROR(EIO);
-        // vaRenderPicture() has been called here, so we should not destroy
-        // the parameter buffers unless separate destruction is required.
-        if (CONFIG_VAAPI_1 || ctx->hwctx->driver_quirks &
-            AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS)
-            goto fail;
-        else
-            goto fail_at_end;
-    }
-
-    if (CONFIG_VAAPI_1 || ctx->hwctx->driver_quirks &
-        AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS) {
-        for (i = 0; i < pic->nb_param_buffers; i++) {
-            vas = vaDestroyBuffer(ctx->hwctx->display,
-                                  pic->param_buffers[i]);
-            if (vas != VA_STATUS_SUCCESS) {
-                av_log(avctx, AV_LOG_ERROR, "Failed to destroy "
-                       "param buffer %#x: %d (%s).\n",
-                       pic->param_buffers[i], vas, vaErrorStr(vas));
-                // And ignore.
-            }
+        goto fail;
+    }
+
+    for (i = 0; i < pic->nb_param_buffers; i++) {
+        vas = vaDestroyBuffer(ctx->hwctx->display,
+                              pic->param_buffers[i]);
+        if (vas != VA_STATUS_SUCCESS) {
+            av_log(avctx, AV_LOG_ERROR, "Failed to destroy "
+                   "param buffer %#x: %d (%s).\n",
+                   pic->param_buffers[i], vas, vaErrorStr(vas));
+            // And ignore.
         }
     }

@@ -654,7 +643,6 @@ fail:
         for (i = 0; i < pic->nb_slices; i++)
             av_freep(&pic->slices[i].codec_slice_params);
     }
-fail_at_end:
     av_freep(&pic->codec_picture_params);
     av_freep(&pic->param_buffers);
     av_freep(&pic->slices);
@@ -1530,25 +1518,19 @@ static const VAAPIEncodeRTFormat vaapi_encode_rt_formats[] = {
     { "YUV444",    VA_RT_FORMAT_YUV444,        8, 3, 0, 0 },
     { "XYUV",      VA_RT_FORMAT_YUV444,        8, 3, 0, 0 },
     { "YUV411",    VA_RT_FORMAT_YUV411,        8, 3, 2, 0 },
-#if VA_CHECK_VERSION(0, 38, 1)
     { "YUV420_10", VA_RT_FORMAT_YUV420_10BPP, 10, 3, 1, 1 },
-#endif
 };

 static const VAEntrypoint vaapi_encode_entrypoints_normal[] = {
     VAEntrypointEncSlice,
     VAEntrypointEncPicture,
-#if VA_CHECK_VERSION(0, 39, 2)
     VAEntrypointEncSliceLP,
-#endif
     0
 };
-#if VA_CHECK_VERSION(0, 39, 2)
 static const VAEntrypoint vaapi_encode_entrypoints_low_power[] = {
     VAEntrypointEncSliceLP,
     0
 };
-#endif

 static av_cold int vaapi_encode_profile_entrypoint(AVCodecContext *avctx)
 {
@@ -1566,13 +1548,7 @@ static av_cold int vaapi_encode_profile_entrypoint(AVCodecContext *avctx)


     if (ctx->low_power) {
-#if VA_CHECK_VERSION(0, 39, 2)
         usable_entrypoints = vaapi_encode_entrypoints_low_power;
-#else
-        av_log(avctx, AV_LOG_ERROR, "Low-power encoding is not "
-               "supported with this VAAPI version.\n");
-        return AVERROR(EINVAL);
-#endif
     } else {
         usable_entrypoints = vaapi_encode_entrypoints_normal;
     }
@@ -1623,11 +1599,7 @@ static av_cold int vaapi_encode_profile_entrypoint(AVCodecContext *avctx)
             avctx->profile != AV_PROFILE_UNKNOWN)
             continue;

-#if VA_CHECK_VERSION(1, 0, 0)
         profile_string = vaProfileStr(profile->va_profile);
-#else
-        profile_string = "(no profile names)";
-#endif

         for (j = 0; j < n; j++) {
             if (va_profiles[j] == profile->va_profile)
@@ -1686,11 +1658,7 @@ static av_cold int vaapi_encode_profile_entrypoint(AVCodecContext *avctx)
     }

     ctx->va_entrypoint = va_entrypoints[i];
-#if VA_CHECK_VERSION(1, 0, 0)
     entrypoint_string = vaEntrypointStr(ctx->va_entrypoint);
-#else
-    entrypoint_string = "(no entrypoint names)";
-#endif
     av_log(avctx, AV_LOG_VERBOSE, "Using VAAPI entrypoint %s (%d).\n",
            entrypoint_string, ctx->va_entrypoint);

@@ -1807,16 +1775,10 @@ static av_cold int vaapi_encode_init_rate_control(AVCodecContext *avctx)

         supported_va_rc_modes = rc_attr.value;
         if (ctx->blbrc) {
-#if VA_CHECK_VERSION(0, 39, 2)
             if (!(supported_va_rc_modes & VA_RC_MB)) {
                 ctx->blbrc = 0;
                 av_log(avctx, AV_LOG_WARNING, "Driver does not support BLBRC.\n");
             }
-#else
-            ctx->blbrc = 0;
-            av_log(avctx, AV_LOG_WARNING, "Please consider to update to VAAPI 0.39.2 "
-                   "or above, which can support BLBRC.\n");
-#endif
         }

         for (i = 0; i < FF_ARRAY_ELEMS(vaapi_encode_rc_modes); i++) {
@@ -2044,11 +2006,7 @@ rc_mode_found:
         ctx->config_attributes[ctx->nb_config_attributes++] =
             (VAConfigAttrib) {
             .type  = VAConfigAttribRateControl,
-#if VA_CHECK_VERSION(0, 39, 2)
             .value = ctx->blbrc ? ctx->va_rc_mode | VA_RC_MB : ctx->va_rc_mode,
-#else
-            .value = ctx->va_rc_mode,
-#endif
         };
     }

@@ -2081,9 +2039,7 @@ rc_mode_found:
 #if VA_CHECK_VERSION(1, 3, 0)
             .quality_factor     = rc_quality,
 #endif
-#if VA_CHECK_VERSION(0, 39, 2)
             .rc_flags.bits.mb_rate_control = ctx->blbrc ? 1 : 2,
-#endif
         };
         vaapi_encode_add_global_param(avctx,
                                       VAEncMiscParameterTypeRateControl,
@@ -2119,12 +2075,10 @@ rc_mode_found:
     ctx->fr_params = (VAEncMiscParameterFrameRate) {
         .framerate = (unsigned int)fr_den << 16 | fr_num,
     };
-#if VA_CHECK_VERSION(0, 40, 0)
     vaapi_encode_add_global_param(avctx,
                                   VAEncMiscParameterTypeFrameRate,
                                   &ctx->fr_params,
                                   sizeof(ctx->fr_params));
-#endif

     return 0;
 }
@@ -2338,11 +2292,9 @@ static av_cold int vaapi_encode_init_row_slice_structure(AVCodecContext *avctx,
         }
         ctx->nb_slices  = (ctx->slice_block_rows + k - 1) / k;
         ctx->slice_size = k;
-#if VA_CHECK_VERSION(1, 0, 0)
     } else if (slice_structure & VA_ENC_SLICE_STRUCTURE_EQUAL_ROWS) {
         ctx->nb_slices  = ctx->slice_block_rows;
         ctx->slice_size = 1;
-#endif
     } else {
         av_log(avctx, AV_LOG_ERROR, "Driver does not support any usable "
                "slice structure modes (%#x).\n", slice_structure);
@@ -2566,7 +2518,6 @@ static av_cold int vaapi_encode_init_packed_headers(AVCodecContext *avctx)

 static av_cold int vaapi_encode_init_quality(AVCodecContext *avctx)
 {
-#if VA_CHECK_VERSION(0, 36, 0)
     VAAPIEncodeContext *ctx = avctx->priv_data;
     VAStatus vas;
     VAConfigAttrib attr = { VAConfigAttribEncQualityRange };
@@ -2603,17 +2554,12 @@ static av_cold int vaapi_encode_init_quality(AVCodecContext *avctx)
                                       &ctx->quality_params,
                                       sizeof(ctx->quality_params));
     }
-#else
-    av_log(avctx, AV_LOG_WARNING, "The encode quality option is "
-           "not supported with this VAAPI version.\n");
-#endif

     return 0;
 }

 static av_cold int vaapi_encode_init_roi(AVCodecContext *avctx)
 {
-#if VA_CHECK_VERSION(1, 0, 0)
     VAAPIEncodeContext *ctx = avctx->priv_data;
     VAStatus vas;
     VAConfigAttrib attr = { VAConfigAttribEncROI };
@@ -2640,7 +2586,7 @@ static av_cold int vaapi_encode_init_roi(AVCodecContext *avctx)
             (ctx->va_rc_mode == VA_RC_CQP ||
              roi.bits.roi_rc_qp_delta_support);
     }
-#endif
+
     return 0;
 }

diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h
index 0eed9691ca..43f3b8cf82 100644
--- a/libavcodec/vaapi_encode.h
+++ b/libavcodec/vaapi_encode.h
@@ -22,10 +22,7 @@
 #include <stdint.h>

 #include <va/va.h>
-
-#if VA_CHECK_VERSION(1, 0, 0)
 #include <va/va_str.h>
-#endif

 #include "libavutil/hwcontext.h"
 #include "libavutil/hwcontext_vaapi.h"
@@ -82,12 +79,8 @@ typedef struct VAAPIEncodePicture {
     void           *opaque;
     AVBufferRef    *opaque_ref;

-#if VA_CHECK_VERSION(1, 0, 0)
     // ROI regions.
     VAEncROI       *roi;
-#else
-    void           *roi;
-#endif

     int             type;
     int             b_depth;
@@ -293,9 +286,7 @@ typedef struct VAAPIEncodeContext {
     VAEncMiscParameterHRD        hrd_params;
     VAEncMiscParameterFrameRate   fr_params;
     VAEncMiscParameterBufferMaxFrameSize mfs_params;
-#if VA_CHECK_VERSION(0, 36, 0)
     VAEncMiscParameterBufferQualityLevel quality_params;
-#endif

     // Per-sequence parameter structure (VAEncSequenceParameterBuffer*).
     void           *codec_sequence_params;
diff --git a/libavcodec/vaapi_encode_h264.c b/libavcodec/vaapi_encode_h264.c
index d656b1020f..bb4c250bb4 100644
--- a/libavcodec/vaapi_encode_h264.c
+++ b/libavcodec/vaapi_encode_h264.c
@@ -106,7 +106,6 @@ typedef struct VAAPIEncodeH264Context {

     int aud_needed;
     int sei_needed;
-    int sei_cbr_workaround_needed;
 } VAAPIEncodeH264Context;


@@ -271,19 +270,6 @@ static int vaapi_encode_h264_write_extra_header(AVCodecContext *avctx,

         *type = VAEncPackedHeaderRawData;
         return 0;
-
-#if !CONFIG_VAAPI_1
-    } else if (priv->sei_cbr_workaround_needed) {
-        // Insert a zero-length header using the old SEI type.  This is
-        // required to avoid triggering broken behaviour on Intel platforms
-        // in CBR mode where an invalid SEI message is generated by the
-        // driver and inserted into the stream.
-        *data_len = 0;
-        *type = VAEncPackedHeaderH264_SEI;
-        priv->sei_cbr_workaround_needed = 0;
-        return 0;
-#endif
-
     } else {
         return AVERROR_EOF;
     }
@@ -681,10 +667,6 @@ static int vaapi_encode_h264_init_picture_params(AVCodecContext *avctx,

     if (priv->sei & SEI_IDENTIFIER && pic->encode_order == 0)
         priv->sei_needed |= SEI_IDENTIFIER;
-#if !CONFIG_VAAPI_1
-    if (ctx->va_rc_mode == VA_RC_CBR)
-        priv->sei_cbr_workaround_needed = 1;
-#endif

     if (priv->sei & SEI_TIMING) {
         priv->sei_pic_timing = (H264RawSEIPicTiming) {
diff --git a/libavcodec/vaapi_encode_h265.c b/libavcodec/vaapi_encode_h265.c
index 2f59161346..a85b514715 100644
--- a/libavcodec/vaapi_encode_h265.c
+++ b/libavcodec/vaapi_encode_h265.c
@@ -1302,10 +1302,8 @@ static av_cold int vaapi_encode_h265_configure(AVCodecContext *avctx)
 static const VAAPIEncodeProfile vaapi_encode_h265_profiles[] = {
     { AV_PROFILE_HEVC_MAIN,     8, 3, 1, 1, VAProfileHEVCMain       },
     { AV_PROFILE_HEVC_REXT,     8, 3, 1, 1, VAProfileHEVCMain       },
-#if VA_CHECK_VERSION(0, 37, 0)
     { AV_PROFILE_HEVC_MAIN_10, 10, 3, 1, 1, VAProfileHEVCMain10     },
     { AV_PROFILE_HEVC_REXT,    10, 3, 1, 1, VAProfileHEVCMain10     },
-#endif
 #if VA_CHECK_VERSION(1, 2, 0)
     { AV_PROFILE_HEVC_REXT,    12, 3, 1, 1, VAProfileHEVCMain12 },
     { AV_PROFILE_HEVC_REXT,     8, 3, 1, 0, VAProfileHEVCMain422_10 },
-- 
2.43.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [FFmpeg-devel] [PATCH v3 3/4] lavfi: Remove libva 1.x support
  2024-04-22 21:41 [FFmpeg-devel] [PATCH v3 1/4] lavu: Remove libva 1.x support Mark Thompson
  2024-04-22 21:42 ` [FFmpeg-devel] [PATCH v3 2/4] lavc: " Mark Thompson
@ 2024-04-22 21:43 ` Mark Thompson
  2024-04-22 21:44 ` [FFmpeg-devel] [PATCH v3 4/4] configure: " Mark Thompson
  2024-04-24 14:06 ` [FFmpeg-devel] [PATCH v3 1/4] lavu: " Xiang, Haihao
  3 siblings, 0 replies; 6+ messages in thread
From: Mark Thompson @ 2024-04-22 21:43 UTC (permalink / raw)
  To: FFmpeg development discussions and patches

libva 2.0 was released in 2017 and the 2.x versions are included in all
supported distributions nowadays.
---
Rebase on the dynamic pool change.


 libavfilter/vaapi_vpp.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/libavfilter/vaapi_vpp.c b/libavfilter/vaapi_vpp.c
index 9ef7a289fb..fe14170fee 100644
--- a/libavfilter/vaapi_vpp.c
+++ b/libavfilter/vaapi_vpp.c
@@ -204,12 +204,9 @@ int ff_vaapi_vpp_config_output(AVFilterLink *outlink)
     output_frames->width     = ctx->output_width;
     output_frames->height    = ctx->output_height;

-    if (CONFIG_VAAPI_1)
-        output_frames->initial_pool_size = 0;
-    else
-        output_frames->initial_pool_size = 4;
+    output_frames->initial_pool_size = 0;

-    err = ff_filter_init_hw_frames(avctx, outlink, 10);
+    err = ff_filter_init_hw_frames(avctx, outlink, 0);
     if (err < 0)
         goto fail;

@@ -677,15 +674,12 @@ int ff_vaapi_vpp_render_pictures(AVFilterContext *avctx,
         goto fail_after_render;
     }

-    if (CONFIG_VAAPI_1 || ctx->hwctx->driver_quirks &
-        AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS) {
-        for (int i = 0; i < cout && params_ids[i] != VA_INVALID_ID; i++) {
-            vas = vaDestroyBuffer(ctx->hwctx->display, params_ids[i]);
-            if (vas != VA_STATUS_SUCCESS) {
-                av_log(avctx, AV_LOG_ERROR, "Failed to free parameter buffer: "
-                       "%d (%s).\n", vas, vaErrorStr(vas));
-                // And ignore.
-            }
+    for (int i = 0; i < cout && params_ids[i] != VA_INVALID_ID; i++) {
+        vas = vaDestroyBuffer(ctx->hwctx->display, params_ids[i]);
+        if (vas != VA_STATUS_SUCCESS) {
+            av_log(avctx, AV_LOG_ERROR, "Failed to free parameter buffer: "
+                   "%d (%s).\n", vas, vaErrorStr(vas));
+            // And ignore.
         }
     }

-- 
2.43.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [FFmpeg-devel] [PATCH v3 4/4] configure: Remove libva 1.x support
  2024-04-22 21:41 [FFmpeg-devel] [PATCH v3 1/4] lavu: Remove libva 1.x support Mark Thompson
  2024-04-22 21:42 ` [FFmpeg-devel] [PATCH v3 2/4] lavc: " Mark Thompson
  2024-04-22 21:43 ` [FFmpeg-devel] [PATCH v3 3/4] lavfi: " Mark Thompson
@ 2024-04-22 21:44 ` Mark Thompson
  2024-04-24 14:06 ` [FFmpeg-devel] [PATCH v3 1/4] lavu: " Xiang, Haihao
  3 siblings, 0 replies; 6+ messages in thread
From: Mark Thompson @ 2024-04-22 21:44 UTC (permalink / raw)
  To: FFmpeg development discussions and patches

libva 2.0 was released in 2017 and the 2.x versions are included in all
supported distributions nowadays.  Various features no longer need any
configure check after this command, including all codecs except AV1.
Note that the libva version is the API version plus one, so this is
removing support for VAAPI 0.x and requiring VAAPI 1.x.
---
 configure | 25 ++++++-------------------
 1 file changed, 6 insertions(+), 19 deletions(-)

diff --git a/configure b/configure
index 02711bf930..e3361a1a73 100755
--- a/configure
+++ b/configure
@@ -2625,7 +2625,6 @@ CONFIG_EXTRA="
     texturedsp
     texturedspenc
     tpeldsp
-    vaapi_1
     vaapi_encode
     vc1dsp
     videodsp
@@ -3189,7 +3188,7 @@ hevc_dxva2_hwaccel_deps="dxva2 DXVA_PicParams_HEVC"
 hevc_dxva2_hwaccel_select="hevc_decoder"
 hevc_nvdec_hwaccel_deps="nvdec"
 hevc_nvdec_hwaccel_select="hevc_decoder"
-hevc_vaapi_hwaccel_deps="vaapi VAPictureParameterBufferHEVC"
+hevc_vaapi_hwaccel_deps="vaapi"
 hevc_vaapi_hwaccel_select="hevc_decoder"
 hevc_vdpau_hwaccel_deps="vdpau VdpPictureInfoHEVC"
 hevc_vdpau_hwaccel_select="hevc_decoder"
@@ -3261,7 +3260,7 @@ vp9_dxva2_hwaccel_deps="dxva2 DXVA_PicParams_VP9"
 vp9_dxva2_hwaccel_select="vp9_decoder"
 vp9_nvdec_hwaccel_deps="nvdec"
 vp9_nvdec_hwaccel_select="vp9_decoder"
-vp9_vaapi_hwaccel_deps="vaapi VADecPictureParameterBufferVP9_bit_depth"
+vp9_vaapi_hwaccel_deps="vaapi"
 vp9_vaapi_hwaccel_select="vp9_decoder"
 vp9_vdpau_hwaccel_deps="vdpau VdpPictureInfoVP9"
 vp9_vdpau_hwaccel_select="vp9_decoder"
@@ -3353,7 +3352,6 @@ hevc_qsv_decoder_select="hevc_mp4toannexb_bsf qsvdec"
 hevc_qsv_encoder_select="hevcparse qsvenc"
 hevc_rkmpp_decoder_deps="rkmpp"
 hevc_rkmpp_decoder_select="hevc_mp4toannexb_bsf"
-hevc_vaapi_encoder_deps="VAEncPictureParameterBufferHEVC"
 hevc_vaapi_encoder_select="atsc_a53 cbs_h265 vaapi_encode"
 hevc_v4l2m2m_decoder_deps="v4l2_m2m hevc_v4l2_m2m"
 hevc_v4l2m2m_decoder_select="hevc_mp4toannexb_bsf"
@@ -3362,7 +3360,6 @@ mjpeg_cuvid_decoder_deps="cuvid"
 mjpeg_qsv_decoder_select="qsvdec"
 mjpeg_qsv_encoder_deps="libmfx"
 mjpeg_qsv_encoder_select="qsvenc"
-mjpeg_vaapi_encoder_deps="VAEncPictureParameterBufferJPEG"
 mjpeg_vaapi_encoder_select="cbs_jpeg jpegtables vaapi_encode"
 mp3_mf_encoder_deps="mediafoundation"
 mpeg1_cuvid_decoder_deps="cuvid"
@@ -3390,7 +3387,6 @@ vp8_mediacodec_decoder_deps="mediacodec"
 vp8_mediacodec_encoder_deps="mediacodec"
 vp8_qsv_decoder_select="qsvdec"
 vp8_rkmpp_decoder_deps="rkmpp"
-vp8_vaapi_encoder_deps="VAEncPictureParameterBufferVP8"
 vp8_vaapi_encoder_select="vaapi_encode"
 vp8_v4l2m2m_decoder_deps="v4l2_m2m vp8_v4l2_m2m"
 vp8_v4l2m2m_encoder_deps="v4l2_m2m vp8_v4l2_m2m"
@@ -3399,7 +3395,6 @@ vp9_mediacodec_decoder_deps="mediacodec"
 vp9_mediacodec_encoder_deps="mediacodec"
 vp9_qsv_decoder_select="qsvdec"
 vp9_rkmpp_decoder_deps="rkmpp"
-vp9_vaapi_encoder_deps="VAEncPictureParameterBufferVP9"
 vp9_vaapi_encoder_select="vaapi_encode"
 vp9_qsv_encoder_deps="libmfx MFX_CODEC_VP9"
 vp9_qsv_encoder_select="qsvenc"
@@ -3950,9 +3945,9 @@ xfade_vulkan_filter_deps="vulkan spirv_compiler"
 yadif_cuda_filter_deps="ffnvcodec"
 yadif_cuda_filter_deps_any="cuda_nvcc cuda_llvm"
 yadif_videotoolbox_filter_deps="metal corevideo videotoolbox"
-hstack_vaapi_filter_deps="vaapi_1"
-vstack_vaapi_filter_deps="vaapi_1"
-xstack_vaapi_filter_deps="vaapi_1"
+hstack_vaapi_filter_deps="vaapi"
+vstack_vaapi_filter_deps="vaapi"
+xstack_vaapi_filter_deps="vaapi"
 hstack_qsv_filter_deps="libmfx"
 hstack_qsv_filter_select="qsvvpp"
 vstack_qsv_filter_deps="libmfx"
@@ -7245,7 +7240,7 @@ enabled libdrm &&
     check_pkg_config libdrm_getfb2 libdrm "xf86drmMode.h" drmModeGetFB2

 enabled vaapi &&
-    check_pkg_config vaapi "libva >= 0.35.0" "va/va.h" vaInitialize
+    check_pkg_config vaapi "libva >= 1.0.0" "va/va.h" vaInitialize

 if enabled vaapi; then
     case $target_os in
@@ -7261,18 +7256,10 @@ if enabled vaapi; then
         check_pkg_config vaapi_x11 "libva-x11" "va/va_x11.h" vaGetDisplay
     fi

-    check_cpp_condition vaapi_1 "va/va.h" "VA_CHECK_VERSION(1, 0, 0)"
-
-    check_type "va/va.h va/va_dec_hevc.h" "VAPictureParameterBufferHEVC"
-    check_struct "va/va.h" "VADecPictureParameterBufferVP9" bit_depth
     check_struct "va/va.h" "VADecPictureParameterBufferAV1" bit_depth_idx
     check_type   "va/va.h va/va_vpp.h" "VAProcFilterParameterBufferHDRToneMapping"
     check_struct "va/va.h va/va_vpp.h" "VAProcPipelineCaps" rotation_flags
     check_struct "va/va.h va/va_vpp.h" "VAProcPipelineCaps" blend_flags
-    check_type "va/va.h va/va_enc_hevc.h" "VAEncPictureParameterBufferHEVC"
-    check_type "va/va.h va/va_enc_jpeg.h" "VAEncPictureParameterBufferJPEG"
-    check_type "va/va.h va/va_enc_vp8.h"  "VAEncPictureParameterBufferVP8"
-    check_type "va/va.h va/va_enc_vp9.h"  "VAEncPictureParameterBufferVP9"
     check_type "va/va.h va/va_enc_av1.h"  "VAEncPictureParameterBufferAV1"
 fi

-- 
2.43.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [FFmpeg-devel] [PATCH v3 1/4] lavu: Remove libva 1.x support
  2024-04-22 21:41 [FFmpeg-devel] [PATCH v3 1/4] lavu: Remove libva 1.x support Mark Thompson
                   ` (2 preceding siblings ...)
  2024-04-22 21:44 ` [FFmpeg-devel] [PATCH v3 4/4] configure: " Mark Thompson
@ 2024-04-24 14:06 ` Xiang, Haihao
  2024-04-28 14:21   ` Mark Thompson
  3 siblings, 1 reply; 6+ messages in thread
From: Xiang, Haihao @ 2024-04-24 14:06 UTC (permalink / raw)
  To: ffmpeg-devel

On Ma, 2024-04-22 at 22:41 +0100, Mark Thompson wrote:
> libva 2.0 was released in 2017 and the 2.x versions are included in all
> supported distributions nowadays.
> ---
> Rebased.
> 
> I think we can also drop the other quirks?  They are for the proprietary media
> SDK driver (which I think is dead?) and the VDPAU wrapper (which I don't think
> was ever updated for libva 2?).

Agree, please drop these quirks in a new patch. 

BTW I think we should require VA-API 1.x firstly, otherwise if someone has VA-
API 0.x, he/she will get errors when building this commit. 

Thanks
Haihao

> 
> 
>  libavutil/hwcontext_vaapi.c | 22 ----------------------
>  1 file changed, 22 deletions(-)
> 
> diff --git a/libavutil/hwcontext_vaapi.c b/libavutil/hwcontext_vaapi.c
> index 56d03aa4cd..84bcb78087 100644
> --- a/libavutil/hwcontext_vaapi.c
> +++ b/libavutil/hwcontext_vaapi.c
> @@ -372,14 +372,6 @@ static const struct {
>      const char *match_string;
>      unsigned int quirks;
>  } vaapi_driver_quirks_table[] = {
> -#if !VA_CHECK_VERSION(1, 0, 0)
> -    // The i965 driver did not conform before version 2.0.
> -    {
> -        "Intel i965 (Quick Sync)",
> -        "i965",
> -        AV_VAAPI_DRIVER_QUIRK_RENDER_PARAM_BUFFERS,
> -    },
> -#endif
>      {
>          "Intel iHD",
>          "ubit",
> @@ -1413,7 +1405,6 @@ fail:
>  }
>  #endif
> 
> -#if VA_CHECK_VERSION(0, 36, 0)
>  typedef struct VAAPIDRMImageBufferMapping {
>      VAImage      image;
>      VABufferInfo buffer_info;
> @@ -1573,7 +1564,6 @@ fail:
>      av_freep(&mapping);
>      return err;
>  }
> -#endif
> 
>  static int vaapi_map_to_drm(AVHWFramesContext *hwfc, AVFrame *dst,
>                              const AVFrame *src, int flags)
> @@ -1584,10 +1574,7 @@ static int vaapi_map_to_drm(AVHWFramesContext *hwfc,
> AVFrame *dst,
>      if (err != AVERROR(ENOSYS))
>          return err;
>  #endif
> -#if VA_CHECK_VERSION(0, 36, 0)
>      return vaapi_map_to_drm_abh(hwfc, dst, src, flags);
> -#endif
> -    return AVERROR(ENOSYS);
>  }
> 
>  #endif /* CONFIG_LIBDRM */
> @@ -1637,7 +1624,6 @@ static void vaapi_device_free(AVHWDeviceContext *ctx)
>      av_freep(&priv);
>  }
> 
> -#if CONFIG_VAAPI_1
>  static void vaapi_device_log_error(void *context, const char *message)
>  {
>      AVHWDeviceContext *ctx = context;
> @@ -1651,7 +1637,6 @@ static void vaapi_device_log_info(void *context, const
> char *message)
> 
>      av_log(ctx, AV_LOG_VERBOSE, "libva: %s", message);
>  }
> -#endif
> 
>  static int vaapi_device_connect(AVHWDeviceContext *ctx,
>                                  VADisplay display)
> @@ -1660,10 +1645,8 @@ static int vaapi_device_connect(AVHWDeviceContext *ctx,
>      int major, minor;
>      VAStatus vas;
> 
> -#if CONFIG_VAAPI_1
>      vaSetErrorCallback(display, &vaapi_device_log_error, ctx);
>      vaSetInfoCallback (display, &vaapi_device_log_info,  ctx);
> -#endif
> 
>      hwctx->display = display;
> 
> @@ -1907,7 +1890,6 @@ static int vaapi_device_create(AVHWDeviceContext *ctx,
> const char *device,
> 
>      ent = av_dict_get(opts, "driver", NULL, 0);
>      if (ent) {
> -#if VA_CHECK_VERSION(0, 38, 0)
>          VAStatus vas;
>          vas = vaSetDriverName(display, ent->value);
>          if (vas != VA_STATUS_SUCCESS) {
> @@ -1916,10 +1898,6 @@ static int vaapi_device_create(AVHWDeviceContext *ctx,
> const char *device,
>              vaTerminate(display);
>              return AVERROR_EXTERNAL;
>          }
> -#else
> -        av_log(ctx, AV_LOG_WARNING, "Driver name setting is not "
> -               "supported with this VAAPI version.\n");
> -#endif
>      }
> 
>      return vaapi_device_connect(ctx, display);

_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [FFmpeg-devel] [PATCH v3 1/4] lavu: Remove libva 1.x support
  2024-04-24 14:06 ` [FFmpeg-devel] [PATCH v3 1/4] lavu: " Xiang, Haihao
@ 2024-04-28 14:21   ` Mark Thompson
  0 siblings, 0 replies; 6+ messages in thread
From: Mark Thompson @ 2024-04-28 14:21 UTC (permalink / raw)
  To: ffmpeg-devel

On 24/04/2024 15:06, Xiang, Haihao wrote:
> On Ma, 2024-04-22 at 22:41 +0100, Mark Thompson wrote:
>> libva 2.0 was released in 2017 and the 2.x versions are included in all
>> supported distributions nowadays.
>> ---
>> Rebased.
>>
>> I think we can also drop the other quirks?  They are for the proprietary media
>> SDK driver (which I think is dead?) and the VDPAU wrapper (which I don't think
>> was ever updated for libva 2?).
> 
> Agree, please drop these quirks in a new patch. 

Sure.

> BTW I think we should require VA-API 1.x firstly, otherwise if someone has VA-
> API 0.x, he/she will get errors when building this commit. 

I was intending to squash but had them split for review, though as you say they can stay split with more careful ordering - I will do this.

Thanks,

- Mark
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2024-04-28 14:20 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-22 21:41 [FFmpeg-devel] [PATCH v3 1/4] lavu: Remove libva 1.x support Mark Thompson
2024-04-22 21:42 ` [FFmpeg-devel] [PATCH v3 2/4] lavc: " Mark Thompson
2024-04-22 21:43 ` [FFmpeg-devel] [PATCH v3 3/4] lavfi: " Mark Thompson
2024-04-22 21:44 ` [FFmpeg-devel] [PATCH v3 4/4] configure: " Mark Thompson
2024-04-24 14:06 ` [FFmpeg-devel] [PATCH v3 1/4] lavu: " Xiang, Haihao
2024-04-28 14:21   ` Mark Thompson

Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
		ffmpegdev@gitmailbox.com
	public-inbox-index ffmpegdev

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git