Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
 help / color / mirror / Atom feed
* [FFmpeg-devel] [PATCH v3] avformat/mov: add interleaved_read option
@ 2023-09-11 17:03 Zhao Zhili
  2023-09-14  1:41 ` Steven Liu
  0 siblings, 1 reply; 3+ messages in thread
From: Zhao Zhili @ 2023-09-11 17:03 UTC (permalink / raw)
  To: ffmpeg-devel; +Cc: Zhao Zhili, Derek Buitenhuis

From: Zhao Zhili <zhilizhao@tencent.com>

For bad interleaved files, manually interleave multiple tracks at the
demuxer level can trigger seeking back and forth, which can be
dramatically slow depending on the protocol. Demuxer level interleave
can be useless sometimes, e.g., reading mp4 via http and then
transcoding/remux to DASH. Disable this option when you don't need the
demuxer level interleave, and want to avoid the IO penalizes.

Co-authored-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
---
v3: update doc
v2: rename option

This issue is well known. Two samples can be found at here
http://ffmpeg.org/pipermail/ffmpeg-devel/2022-December/304951.html

 doc/demuxers.texi     | 7 +++++++
 libavformat/isom.h    | 1 +
 libavformat/mov.c     | 5 ++++-
 libavformat/version.h | 2 +-
 4 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/doc/demuxers.texi b/doc/demuxers.texi
index 2d33b47a56..ca1563abb0 100644
--- a/doc/demuxers.texi
+++ b/doc/demuxers.texi
@@ -779,6 +779,13 @@ cast to int32 are used to adjust onward dts.
 
 Unit is the track time scale. Range is 0 to UINT_MAX. Default is @code{UINT_MAX - 48000*10} which allows upto
 a 10 second dts correction for 48 kHz audio streams while accommodating 99.9% of @code{uint32} range.
+
+@item interleaved_read
+Interleave packets from multiple tracks at demuxer level. For badly interleaved files, this prevents playback issues
+caused by large gaps between packets in different tracks, as MOV/MP4 do not have packet placement requirements.
+However, this can cause excessive seeking on very badly interleaved files, due to seeking between tracks, so disabling
+it may prevent I/O issues, at the expense of playback.
+
 @end table
 
 @subsection Audible AAX
diff --git a/libavformat/isom.h b/libavformat/isom.h
index 4b1cd42f0f..3d375d7a46 100644
--- a/libavformat/isom.h
+++ b/libavformat/isom.h
@@ -327,6 +327,7 @@ typedef struct MOVContext {
         int64_t extent_offset;
     } *avif_info;
     int avif_info_size;
+    int interleaved_read;
 } MOVContext;
 
 int ff_mp4_read_descr_len(AVIOContext *pb);
diff --git a/libavformat/mov.c b/libavformat/mov.c
index aa1d9e4ccc..8ad5f0b646 100644
--- a/libavformat/mov.c
+++ b/libavformat/mov.c
@@ -8780,6 +8780,8 @@ static AVIndexEntry *mov_find_next_sample(AVFormatContext *s, AVStream **st)
     AVIndexEntry *sample = NULL;
     int64_t best_dts = INT64_MAX;
     int i;
+    MOVContext *mov = s->priv_data;
+    int no_interleave = !mov->interleaved_read || !(s->pb->seekable & AVIO_SEEKABLE_NORMAL);
     for (i = 0; i < s->nb_streams; i++) {
         AVStream *avst = s->streams[i];
         FFStream *const avsti = ffstream(avst);
@@ -8788,7 +8790,7 @@ static AVIndexEntry *mov_find_next_sample(AVFormatContext *s, AVStream **st)
             AVIndexEntry *current_sample = &avsti->index_entries[msc->current_sample];
             int64_t dts = av_rescale(current_sample->timestamp, AV_TIME_BASE, msc->time_scale);
             av_log(s, AV_LOG_TRACE, "stream %d, sample %d, dts %"PRId64"\n", i, msc->current_sample, dts);
-            if (!sample || (!(s->pb->seekable & AVIO_SEEKABLE_NORMAL) && current_sample->pos < sample->pos) ||
+            if (!sample || (no_interleave && current_sample->pos < sample->pos) ||
                 ((s->pb->seekable & AVIO_SEEKABLE_NORMAL) &&
                  ((msc->pb != s->pb && dts < best_dts) || (msc->pb == s->pb && dts != AV_NOPTS_VALUE &&
                  ((FFABS(best_dts - dts) <= AV_TIME_BASE && current_sample->pos < sample->pos) ||
@@ -9282,6 +9284,7 @@ static const AVOption mov_options[] = {
     { "enable_drefs", "Enable external track support.", OFFSET(enable_drefs), AV_OPT_TYPE_BOOL,
         {.i64 = 0}, 0, 1, FLAGS },
     { "max_stts_delta", "treat offsets above this value as invalid", OFFSET(max_stts_delta), AV_OPT_TYPE_INT, {.i64 = UINT_MAX-48000*10 }, 0, UINT_MAX, .flags = AV_OPT_FLAG_DECODING_PARAM },
+    { "interleaved_read", "Manually interleave between multiple tracks", OFFSET(interleaved_read), AV_OPT_TYPE_BOOL, {.i64 = 1 }, 0, 1, .flags = AV_OPT_FLAG_DECODING_PARAM },
 
     { NULL },
 };
diff --git a/libavformat/version.h b/libavformat/version.h
index cb67e0a1f8..e41362ac9d 100644
--- a/libavformat/version.h
+++ b/libavformat/version.h
@@ -32,7 +32,7 @@
 #include "version_major.h"
 
 #define LIBAVFORMAT_VERSION_MINOR  12
-#define LIBAVFORMAT_VERSION_MICRO 100
+#define LIBAVFORMAT_VERSION_MICRO 101
 
 #define LIBAVFORMAT_VERSION_INT AV_VERSION_INT(LIBAVFORMAT_VERSION_MAJOR, \
                                                LIBAVFORMAT_VERSION_MINOR, \
-- 
2.34.1

_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [FFmpeg-devel] [PATCH v3] avformat/mov: add interleaved_read option
  2023-09-11 17:03 [FFmpeg-devel] [PATCH v3] avformat/mov: add interleaved_read option Zhao Zhili
@ 2023-09-14  1:41 ` Steven Liu
  2023-09-14  4:09   ` "zhilizhao(赵志立)"
  0 siblings, 1 reply; 3+ messages in thread
From: Steven Liu @ 2023-09-14  1:41 UTC (permalink / raw)
  To: FFmpeg development discussions and patches; +Cc: Zhao Zhili, Derek Buitenhuis

Zhao Zhili <quinkblack@foxmail.com> 于2023年9月12日周二 01:10写道:
>
> From: Zhao Zhili <zhilizhao@tencent.com>
>
> For bad interleaved files, manually interleave multiple tracks at the
> demuxer level can trigger seeking back and forth, which can be
> dramatically slow depending on the protocol. Demuxer level interleave
> can be useless sometimes, e.g., reading mp4 via http and then
> transcoding/remux to DASH. Disable this option when you don't need the
> demuxer level interleave, and want to avoid the IO penalizes.
>
> Co-authored-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
> Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
> ---
> v3: update doc
> v2: rename option
>
> This issue is well known. Two samples can be found at here
> http://ffmpeg.org/pipermail/ffmpeg-devel/2022-December/304951.html
>
>  doc/demuxers.texi     | 7 +++++++
>  libavformat/isom.h    | 1 +
>  libavformat/mov.c     | 5 ++++-
>  libavformat/version.h | 2 +-
>  4 files changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/doc/demuxers.texi b/doc/demuxers.texi
> index 2d33b47a56..ca1563abb0 100644
> --- a/doc/demuxers.texi
> +++ b/doc/demuxers.texi
> @@ -779,6 +779,13 @@ cast to int32 are used to adjust onward dts.
>
>  Unit is the track time scale. Range is 0 to UINT_MAX. Default is @code{UINT_MAX - 48000*10} which allows upto
>  a 10 second dts correction for 48 kHz audio streams while accommodating 99.9% of @code{uint32} range.
> +
> +@item interleaved_read
> +Interleave packets from multiple tracks at demuxer level. For badly interleaved files, this prevents playback issues
> +caused by large gaps between packets in different tracks, as MOV/MP4 do not have packet placement requirements.
> +However, this can cause excessive seeking on very badly interleaved files, due to seeking between tracks, so disabling
> +it may prevent I/O issues, at the expense of playback.
> +
>  @end table
>
>  @subsection Audible AAX
> diff --git a/libavformat/isom.h b/libavformat/isom.h
> index 4b1cd42f0f..3d375d7a46 100644
> --- a/libavformat/isom.h
> +++ b/libavformat/isom.h
> @@ -327,6 +327,7 @@ typedef struct MOVContext {
>          int64_t extent_offset;
>      } *avif_info;
>      int avif_info_size;
> +    int interleaved_read;
>  } MOVContext;
>
>  int ff_mp4_read_descr_len(AVIOContext *pb);
> diff --git a/libavformat/mov.c b/libavformat/mov.c
> index aa1d9e4ccc..8ad5f0b646 100644
> --- a/libavformat/mov.c
> +++ b/libavformat/mov.c
> @@ -8780,6 +8780,8 @@ static AVIndexEntry *mov_find_next_sample(AVFormatContext *s, AVStream **st)
>      AVIndexEntry *sample = NULL;
>      int64_t best_dts = INT64_MAX;
>      int i;
> +    MOVContext *mov = s->priv_data;
> +    int no_interleave = !mov->interleaved_read || !(s->pb->seekable & AVIO_SEEKABLE_NORMAL);
>      for (i = 0; i < s->nb_streams; i++) {
>          AVStream *avst = s->streams[i];
>          FFStream *const avsti = ffstream(avst);
> @@ -8788,7 +8790,7 @@ static AVIndexEntry *mov_find_next_sample(AVFormatContext *s, AVStream **st)
>              AVIndexEntry *current_sample = &avsti->index_entries[msc->current_sample];
>              int64_t dts = av_rescale(current_sample->timestamp, AV_TIME_BASE, msc->time_scale);
>              av_log(s, AV_LOG_TRACE, "stream %d, sample %d, dts %"PRId64"\n", i, msc->current_sample, dts);
> -            if (!sample || (!(s->pb->seekable & AVIO_SEEKABLE_NORMAL) && current_sample->pos < sample->pos) ||
> +            if (!sample || (no_interleave && current_sample->pos < sample->pos) ||
>                  ((s->pb->seekable & AVIO_SEEKABLE_NORMAL) &&
>                   ((msc->pb != s->pb && dts < best_dts) || (msc->pb == s->pb && dts != AV_NOPTS_VALUE &&
>                   ((FFABS(best_dts - dts) <= AV_TIME_BASE && current_sample->pos < sample->pos) ||
> @@ -9282,6 +9284,7 @@ static const AVOption mov_options[] = {
>      { "enable_drefs", "Enable external track support.", OFFSET(enable_drefs), AV_OPT_TYPE_BOOL,
>          {.i64 = 0}, 0, 1, FLAGS },
>      { "max_stts_delta", "treat offsets above this value as invalid", OFFSET(max_stts_delta), AV_OPT_TYPE_INT, {.i64 = UINT_MAX-48000*10 }, 0, UINT_MAX, .flags = AV_OPT_FLAG_DECODING_PARAM },
> +    { "interleaved_read", "Manually interleave between multiple tracks", OFFSET(interleaved_read), AV_OPT_TYPE_BOOL, {.i64 = 1 }, 0, 1, .flags = AV_OPT_FLAG_DECODING_PARAM },
>
>      { NULL },
>  };
> diff --git a/libavformat/version.h b/libavformat/version.h
> index cb67e0a1f8..e41362ac9d 100644
> --- a/libavformat/version.h
> +++ b/libavformat/version.h
> @@ -32,7 +32,7 @@
>  #include "version_major.h"
>
>  #define LIBAVFORMAT_VERSION_MINOR  12
> -#define LIBAVFORMAT_VERSION_MICRO 100
> +#define LIBAVFORMAT_VERSION_MICRO 101
>
>  #define LIBAVFORMAT_VERSION_INT AV_VERSION_INT(LIBAVFORMAT_VERSION_MAJOR, \
>                                                 LIBAVFORMAT_VERSION_MINOR, \
> --
> 2.34.1
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".


lgtm

Thanks
Steven
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [FFmpeg-devel] [PATCH v3] avformat/mov: add interleaved_read option
  2023-09-14  1:41 ` Steven Liu
@ 2023-09-14  4:09   ` "zhilizhao(赵志立)"
  0 siblings, 0 replies; 3+ messages in thread
From: "zhilizhao(赵志立)" @ 2023-09-14  4:09 UTC (permalink / raw)
  To: FFmpeg development discussions and patches



> On Sep 14, 2023, at 09:41, Steven Liu <lingjiujianke@gmail.com> wrote:
> 
> Zhao Zhili <quinkblack@foxmail.com> 于2023年9月12日周二 01:10写道:
>> 
>> From: Zhao Zhili <zhilizhao@tencent.com>
>> 
>> For bad interleaved files, manually interleave multiple tracks at the
>> demuxer level can trigger seeking back and forth, which can be
>> dramatically slow depending on the protocol. Demuxer level interleave
>> can be useless sometimes, e.g., reading mp4 via http and then
>> transcoding/remux to DASH. Disable this option when you don't need the
>> demuxer level interleave, and want to avoid the IO penalizes.
>> 
>> Co-authored-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
>> Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
>> ---
>> v3: update doc
>> v2: rename option
>> 
>> This issue is well known. Two samples can be found at here
>> http://ffmpeg.org/pipermail/ffmpeg-devel/2022-December/304951.html
>> 
>> doc/demuxers.texi     | 7 +++++++
>> libavformat/isom.h    | 1 +
>> libavformat/mov.c     | 5 ++++-
>> libavformat/version.h | 2 +-
>> 4 files changed, 13 insertions(+), 2 deletions(-)
>> 
>> diff --git a/doc/demuxers.texi b/doc/demuxers.texi
>> index 2d33b47a56..ca1563abb0 100644
>> --- a/doc/demuxers.texi
>> +++ b/doc/demuxers.texi
>> @@ -779,6 +779,13 @@ cast to int32 are used to adjust onward dts.
>> 
>> Unit is the track time scale. Range is 0 to UINT_MAX. Default is @code{UINT_MAX - 48000*10} which allows upto
>> a 10 second dts correction for 48 kHz audio streams while accommodating 99.9% of @code{uint32} range.
>> +
>> +@item interleaved_read
>> +Interleave packets from multiple tracks at demuxer level. For badly interleaved files, this prevents playback issues
>> +caused by large gaps between packets in different tracks, as MOV/MP4 do not have packet placement requirements.
>> +However, this can cause excessive seeking on very badly interleaved files, due to seeking between tracks, so disabling
>> +it may prevent I/O issues, at the expense of playback.
>> +
>> @end table
>> 
>> @subsection Audible AAX
>> diff --git a/libavformat/isom.h b/libavformat/isom.h
>> index 4b1cd42f0f..3d375d7a46 100644
>> --- a/libavformat/isom.h
>> +++ b/libavformat/isom.h
>> @@ -327,6 +327,7 @@ typedef struct MOVContext {
>>         int64_t extent_offset;
>>     } *avif_info;
>>     int avif_info_size;
>> +    int interleaved_read;
>> } MOVContext;
>> 
>> int ff_mp4_read_descr_len(AVIOContext *pb);
>> diff --git a/libavformat/mov.c b/libavformat/mov.c
>> index aa1d9e4ccc..8ad5f0b646 100644
>> --- a/libavformat/mov.c
>> +++ b/libavformat/mov.c
>> @@ -8780,6 +8780,8 @@ static AVIndexEntry *mov_find_next_sample(AVFormatContext *s, AVStream **st)
>>     AVIndexEntry *sample = NULL;
>>     int64_t best_dts = INT64_MAX;
>>     int i;
>> +    MOVContext *mov = s->priv_data;
>> +    int no_interleave = !mov->interleaved_read || !(s->pb->seekable & AVIO_SEEKABLE_NORMAL);
>>     for (i = 0; i < s->nb_streams; i++) {
>>         AVStream *avst = s->streams[i];
>>         FFStream *const avsti = ffstream(avst);
>> @@ -8788,7 +8790,7 @@ static AVIndexEntry *mov_find_next_sample(AVFormatContext *s, AVStream **st)
>>             AVIndexEntry *current_sample = &avsti->index_entries[msc->current_sample];
>>             int64_t dts = av_rescale(current_sample->timestamp, AV_TIME_BASE, msc->time_scale);
>>             av_log(s, AV_LOG_TRACE, "stream %d, sample %d, dts %"PRId64"\n", i, msc->current_sample, dts);
>> -            if (!sample || (!(s->pb->seekable & AVIO_SEEKABLE_NORMAL) && current_sample->pos < sample->pos) ||
>> +            if (!sample || (no_interleave && current_sample->pos < sample->pos) ||
>>                 ((s->pb->seekable & AVIO_SEEKABLE_NORMAL) &&
>>                  ((msc->pb != s->pb && dts < best_dts) || (msc->pb == s->pb && dts != AV_NOPTS_VALUE &&
>>                  ((FFABS(best_dts - dts) <= AV_TIME_BASE && current_sample->pos < sample->pos) ||
>> @@ -9282,6 +9284,7 @@ static const AVOption mov_options[] = {
>>     { "enable_drefs", "Enable external track support.", OFFSET(enable_drefs), AV_OPT_TYPE_BOOL,
>>         {.i64 = 0}, 0, 1, FLAGS },
>>     { "max_stts_delta", "treat offsets above this value as invalid", OFFSET(max_stts_delta), AV_OPT_TYPE_INT, {.i64 = UINT_MAX-48000*10 }, 0, UINT_MAX, .flags = AV_OPT_FLAG_DECODING_PARAM },
>> +    { "interleaved_read", "Manually interleave between multiple tracks", OFFSET(interleaved_read), AV_OPT_TYPE_BOOL, {.i64 = 1 }, 0, 1, .flags = AV_OPT_FLAG_DECODING_PARAM },
>> 
>>     { NULL },
>> };
>> diff --git a/libavformat/version.h b/libavformat/version.h
>> index cb67e0a1f8..e41362ac9d 100644
>> --- a/libavformat/version.h
>> +++ b/libavformat/version.h
>> @@ -32,7 +32,7 @@
>> #include "version_major.h"
>> 
>> #define LIBAVFORMAT_VERSION_MINOR  12
>> -#define LIBAVFORMAT_VERSION_MICRO 100
>> +#define LIBAVFORMAT_VERSION_MICRO 101
>> 
>> #define LIBAVFORMAT_VERSION_INT AV_VERSION_INT(LIBAVFORMAT_VERSION_MAJOR, \
>>                                                LIBAVFORMAT_VERSION_MINOR, \
>> --
>> 2.34.1
>> 
>> _______________________________________________
>> ffmpeg-devel mailing list
>> ffmpeg-devel@ffmpeg.org
>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>> 
>> To unsubscribe, visit link above, or email
>> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> 
> 
> lgtm

Pushed with a little modification on the option description. Thanks!

> 
> Thanks
> Steven
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> 
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2023-09-14  4:09 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-09-11 17:03 [FFmpeg-devel] [PATCH v3] avformat/mov: add interleaved_read option Zhao Zhili
2023-09-14  1:41 ` Steven Liu
2023-09-14  4:09   ` "zhilizhao(赵志立)"

Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
		ffmpegdev@gitmailbox.com
	public-inbox-index ffmpegdev

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git