From: James Almer <jamrial@gmail.com> To: ffmpeg-devel@ffmpeg.org Subject: Re: [FFmpeg-devel] [PATCH] avcodec/av1dec: convert to receive_frame() Date: Fri, 19 May 2023 22:29:47 -0300 Message-ID: <df5cadf2-ded7-72bf-f1c6-333fadcd3b53@gmail.com> (raw) In-Reply-To: <AS8P250MB074431F1802D142006DBADC68F7D9@AS8P250MB0744.EURP250.PROD.OUTLOOK.COM> On 5/19/2023 10:17 PM, Andreas Rheinhardt wrote: > James Almer: >> Signed-off-by: James Almer <jamrial@gmail.com> >> --- >> libavcodec/av1dec.c | 75 +++++++++++++++++++++++++++++++++------------ >> libavcodec/av1dec.h | 4 +++ >> 2 files changed, 60 insertions(+), 19 deletions(-) >> >> diff --git a/libavcodec/av1dec.c b/libavcodec/av1dec.c >> index d46ee48335..9344d4ff28 100644 >> --- a/libavcodec/av1dec.c >> +++ b/libavcodec/av1dec.c >> @@ -657,6 +657,7 @@ static av_cold int av1_decode_free(AVCodecContext *avctx) >> } >> av1_frame_unref(avctx, &s->cur_frame); >> av_frame_free(&s->cur_frame.f); >> + av_packet_free(&s->pkt); >> >> av_buffer_unref(&s->seq_ref); >> av_buffer_unref(&s->header_ref); >> @@ -767,6 +768,10 @@ static av_cold int av1_decode_init(AVCodecContext *avctx) >> s->avctx = avctx; >> s->pix_fmt = AV_PIX_FMT_NONE; >> >> + s->pkt = av_packet_alloc(); >> + if (!s->pkt) >> + return AVERROR(ENOMEM); >> + >> for (int i = 0; i < FF_ARRAY_ELEMS(s->ref); i++) { >> s->ref[i].f = av_frame_alloc(); >> if (!s->ref[i].f) { >> @@ -1042,7 +1047,7 @@ static int export_film_grain(AVCodecContext *avctx, AVFrame *frame) >> } >> >> static int set_output_frame(AVCodecContext *avctx, AVFrame *frame, >> - const AVPacket *pkt, int *got_frame) >> + const AVPacket *pkt) >> { >> AV1DecContext *s = avctx->priv_data; >> const AVFrame *srcframe = s->cur_frame.f; >> @@ -1079,8 +1084,6 @@ FF_DISABLE_DEPRECATION_WARNINGS >> FF_ENABLE_DEPRECATION_WARNINGS >> #endif >> >> - *got_frame = 1; >> - >> return 0; >> } >> >> @@ -1145,22 +1148,32 @@ static int get_current_frame(AVCodecContext *avctx) >> return ret; >> } >> >> -static int av1_decode_frame(AVCodecContext *avctx, AVFrame *frame, >> - int *got_frame, AVPacket *pkt) >> +static int av1_receive_frame(AVCodecContext *avctx, AVFrame *frame) >> { >> AV1DecContext *s = avctx->priv_data; >> AV1RawTileGroup *raw_tile_group = NULL; >> - int ret; >> + int i, ret; >> >> - ret = ff_cbs_read_packet(s->cbc, &s->current_obu, pkt); >> - if (ret < 0) { >> - av_log(avctx, AV_LOG_ERROR, "Failed to read packet.\n"); >> - goto end; >> +again: >> + if (!s->current_obu.nb_units) { >> + ret = ff_decode_get_packet(avctx, s->pkt); >> + if (ret < 0) >> + return ret; >> + >> + ret = ff_cbs_read_packet(s->cbc, &s->current_obu, s->pkt); >> + av_packet_unref(s->pkt); > > Given that you unconditionally unref this packet, the packet given to > set_output_frame() will be blank and the timestamps derived based upon > it useless. How have you tested this patch? I decoded to framecrc and got timestamps. But you're right, it's not ok as is. > >> + if (ret < 0) { >> + av_log(avctx, AV_LOG_ERROR, "Failed to read packet.\n"); >> + goto end; >> + } >> + >> + s->nb_unit = 0; >> + >> + av_log(avctx, AV_LOG_DEBUG, "Total OBUs for this TU:%d.\n", >> + s->current_obu.nb_units); >> } >> - av_log(avctx, AV_LOG_DEBUG, "Total obu for this frame:%d.\n", >> - s->current_obu.nb_units); >> >> - for (int i = 0; i < s->current_obu.nb_units; i++) { >> + for (i = s->nb_unit; i < s->current_obu.nb_units; i++) { >> CodedBitstreamUnit *unit = &s->current_obu.units[i]; >> AV1RawOBU *obu = unit->content; >> const AV1RawOBUHeader *header; >> @@ -1168,6 +1181,7 @@ static int av1_decode_frame(AVCodecContext *avctx, AVFrame *frame, >> if (!obu) >> continue; >> >> + ret = 0; >> header = &obu->header; >> av_log(avctx, AV_LOG_DEBUG, "Obu idx:%d, obu type:%d.\n", i, unit->type); >> >> @@ -1251,13 +1265,15 @@ static int av1_decode_frame(AVCodecContext *avctx, AVFrame *frame, >> goto end; >> } >> >> + ret = 0; >> if (s->cur_frame.f->buf[0]) { >> - ret = set_output_frame(avctx, frame, pkt, got_frame); >> + ret = set_output_frame(avctx, frame, s->pkt); >> if (ret < 0) >> av_log(avctx, AV_LOG_ERROR, "Set output frame error.\n"); >> } >> >> s->raw_frame_header = NULL; >> + i++; >> >> goto end; >> } >> @@ -1361,6 +1377,7 @@ static int av1_decode_frame(AVCodecContext *avctx, AVFrame *frame, >> } >> >> if (raw_tile_group && (s->tile_num == raw_tile_group->tg_end + 1)) { >> + int show_frame = s->raw_frame_header->show_frame; >> if (avctx->hwaccel && s->cur_frame.f->buf[0]) { >> ret = avctx->hwaccel->end_frame(avctx); >> if (ret < 0) { >> @@ -1375,8 +1392,9 @@ static int av1_decode_frame(AVCodecContext *avctx, AVFrame *frame, >> goto end; >> } >> >> + ret = 0; >> if (s->raw_frame_header->show_frame && s->cur_frame.f->buf[0]) { >> - ret = set_output_frame(avctx, frame, pkt, got_frame); >> + ret = set_output_frame(avctx, frame, s->pkt); >> if (ret < 0) { >> av_log(avctx, AV_LOG_ERROR, "Set output frame error\n"); >> goto end; >> @@ -1384,13 +1402,30 @@ static int av1_decode_frame(AVCodecContext *avctx, AVFrame *frame, >> } >> raw_tile_group = NULL; >> s->raw_frame_header = NULL; >> + if (show_frame) { >> + i++; >> + goto end; >> + } >> } >> + ret = AVERROR(EAGAIN); >> } >> >> end: >> - ff_cbs_fragment_reset(&s->current_obu); >> - if (ret < 0) >> + av_assert0(i <= s->current_obu.nb_units); >> + s->nb_unit = i; >> + >> + if (s->current_obu.nb_units == i) { >> + ff_cbs_fragment_reset(&s->current_obu); >> + s->nb_unit = 0; >> + } >> + if (ret == AVERROR(EAGAIN)) >> + goto again; >> + if (ret < 0) { >> s->raw_frame_header = NULL; >> + ff_cbs_fragment_reset(&s->current_obu); >> + s->nb_unit = 0; >> + } >> + >> return ret; >> } >> >> @@ -1403,7 +1438,9 @@ static void av1_decode_flush(AVCodecContext *avctx) >> av1_frame_unref(avctx, &s->ref[i]); >> >> av1_frame_unref(avctx, &s->cur_frame); >> + av_packet_unref(s->pkt); >> s->operating_point_idc = 0; >> + s->nb_unit = 0; >> s->raw_frame_header = NULL; >> s->raw_seq = NULL; >> s->cll = NULL; >> @@ -1411,6 +1448,7 @@ static void av1_decode_flush(AVCodecContext *avctx) >> while (av_fifo_read(s->itut_t35_fifo, &itut_t35, 1) >= 0) >> av_buffer_unref(&itut_t35.payload_ref); >> >> + ff_cbs_fragment_reset(&s->current_obu); >> ff_cbs_flush(s->cbc); >> } >> >> @@ -1437,14 +1475,13 @@ const FFCodec ff_av1_decoder = { >> .priv_data_size = sizeof(AV1DecContext), >> .init = av1_decode_init, >> .close = av1_decode_free, >> - FF_CODEC_DECODE_CB(av1_decode_frame), >> + FF_CODEC_RECEIVE_FRAME_CB(av1_receive_frame), >> .p.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_AVOID_PROBING, >> .caps_internal = FF_CODEC_CAP_INIT_CLEANUP | >> FF_CODEC_CAP_SETS_PKT_DTS, >> .flush = av1_decode_flush, >> .p.profiles = NULL_IF_CONFIG_SMALL(ff_av1_profiles), >> .p.priv_class = &av1_class, >> - .bsfs = "av1_frame_split", >> .hw_configs = (const AVCodecHWConfigInternal *const []) { >> #if CONFIG_AV1_DXVA2_HWACCEL >> HWACCEL_DXVA2(av1), >> diff --git a/libavcodec/av1dec.h b/libavcodec/av1dec.h >> index cef899f81f..59ffed1d9b 100644 >> --- a/libavcodec/av1dec.h >> +++ b/libavcodec/av1dec.h >> @@ -28,6 +28,7 @@ >> #include "libavutil/frame.h" >> #include "libavutil/pixfmt.h" >> #include "avcodec.h" >> +#include "packet.h" >> #include "cbs.h" >> #include "cbs_av1.h" >> >> @@ -68,6 +69,7 @@ typedef struct AV1DecContext { >> enum AVPixelFormat pix_fmt; >> CodedBitstreamContext *cbc; >> CodedBitstreamFragment current_obu; >> + AVPacket *pkt; >> >> AVBufferRef *seq_ref; >> AV1RawSequenceHeader *raw_seq; >> @@ -90,6 +92,8 @@ typedef struct AV1DecContext { >> AV1Frame ref[AV1_NUM_REF_FRAMES]; >> AV1Frame cur_frame; >> >> + int nb_unit; >> + >> // AVOptions >> int operating_point; >> } AV1DecContext; > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
prev parent reply other threads:[~2023-05-20 1:29 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-05-19 23:59 James Almer 2023-05-20 1:01 ` Andreas Rheinhardt 2023-05-20 1:29 ` James Almer 2023-05-20 1:17 ` Andreas Rheinhardt 2023-05-20 1:29 ` James Almer [this message]
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=df5cadf2-ded7-72bf-f1c6-333fadcd3b53@gmail.com \ --to=jamrial@gmail.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git