From: Gyan Doshi <ffmpeg@gyani.pro>
To: ffmpeg-devel@ffmpeg.org
Subject: Re: [FFmpeg-devel] [PATCH v4] avformat/mov: add option max_stts_delta
Date: Fri, 31 Dec 2021 14:51:00 +0530
Message-ID: <c8502d60-cb58-52a1-a234-7cdd8ad5941c@gyani.pro> (raw)
In-Reply-To: <20211228164203.617-1-ffmpeg@gyani.pro>
Pushed as 9cfc7a244052dced520776ff0ecc6f0a9390f62b
On 2021-12-28 10:12 pm, Gyan Doshi wrote:
> Very high stts sample deltas may occasionally be intended but usually
> they are written in error or used to store a negative value for dts correction
> when treated as signed 32-bit integers.
>
> This option lets the user set an upper limit, beyond which the delta is clamped to 1.
> Values greater than the limit if negative when cast to int32 are used to adjust onward dts.
>
> Unit is the track time scale. Default is UINT_MAX - 48000*10 which
> allows upto a 10 second dts correction for 48 kHz audio streams while
> accommodating 99.9% of uint32 range.
> ---
> v4 change:
> avoid division by 0
>
> doc/demuxers.texi | 9 ++++++++
> libavformat/isom.h | 1 +
> libavformat/mov.c | 55 +++++++++++++++++++++++++---------------------
> 3 files changed, 40 insertions(+), 25 deletions(-)
>
> diff --git a/doc/demuxers.texi b/doc/demuxers.texi
> index cab8a7072c..99d4ab7bc5 100644
> --- a/doc/demuxers.texi
> +++ b/doc/demuxers.texi
> @@ -713,6 +713,15 @@ specify.
>
> @item decryption_key
> 16-byte key, in hex, to decrypt files encrypted using ISO Common Encryption (CENC/AES-128 CTR; ISO/IEC 23001-7).
> +
> +@item max_stts_delta
> +Very high sample deltas written in a trak's stts box may occasionally be intended but usually they are written in
> +error or used to store a negative value for dts correction when treated as signed 32-bit integers. This option lets
> +the user set an upper limit, beyond which the delta is clamped to 1. Values greater than the limit if negative when
> +cast to int32 are used to adjust onward dts.
> +
> +Unit is the track time scale. Range is 0 to UINT_MAX. Default is @code{UINT_MAX - 48000*10} which allows upto
> +a 10 second dts correction for 48 kHz audio streams while accommodating 99.9% of @code{uint32} range.
> @end table
>
> @subsection Audible AAX
> diff --git a/libavformat/isom.h b/libavformat/isom.h
> index ef8f19b18c..625dea8421 100644
> --- a/libavformat/isom.h
> +++ b/libavformat/isom.h
> @@ -305,6 +305,7 @@ typedef struct MOVContext {
> int32_t movie_display_matrix[3][3]; ///< display matrix from mvhd
> int have_read_mfra_size;
> uint32_t mfra_size;
> + uint32_t max_stts_delta;
> } MOVContext;
>
> int ff_mp4_read_descr_len(AVIOContext *pb);
> diff --git a/libavformat/mov.c b/libavformat/mov.c
> index 2aed6e80ef..351ecde770 100644
> --- a/libavformat/mov.c
> +++ b/libavformat/mov.c
> @@ -2925,6 +2925,8 @@ static int mov_read_stts(MOVContext *c, AVIOContext *pb, MOVAtom atom)
> unsigned int i, entries, alloc_size = 0;
> int64_t duration = 0;
> int64_t total_sample_count = 0;
> + int64_t current_dts = 0;
> + int64_t corrected_dts = 0;
>
> if (c->fc->nb_streams < 1)
> return 0;
> @@ -2965,11 +2967,34 @@ static int mov_read_stts(MOVContext *c, AVIOContext *pb, MOVAtom atom)
> sc->stts_data[i].count= sample_count;
> sc->stts_data[i].duration= sample_duration;
>
> - av_log(c->fc, AV_LOG_TRACE, "sample_count=%d, sample_duration=%d\n",
> + av_log(c->fc, AV_LOG_TRACE, "sample_count=%u, sample_duration=%u\n",
> sample_count, sample_duration);
>
> - duration+=(int64_t)sample_duration*(uint64_t)sample_count;
> - total_sample_count+=sample_count;
> + /* STTS sample offsets are uint32 but some files store it as int32
> + * with negative values used to correct DTS delays.
> + There may be abnormally large values as well. */
> + if (sample_duration > c->max_stts_delta) {
> + // assume high delta is a correction if negative when cast as int32
> + int32_t delta_magnitude = (int32_t)sample_duration;
> + av_log(c->fc, AV_LOG_WARNING, "Too large sample offset %u in stts entry %u with count %u in st:%d. Clipping to 1.\n",
> + sample_duration, i, sample_count, st->index);
> + sc->stts_data[i].duration = 1;
> + corrected_dts += (delta_magnitude < 0 ? (int64_t)delta_magnitude : 1) * sample_count;
> + } else {
> + corrected_dts += sample_duration * sample_count;
> + }
> +
> + current_dts += sc->stts_data[i].duration * sample_count;
> +
> + if (current_dts > corrected_dts) {
> + int64_t drift = (current_dts - corrected_dts)/FFMAX(sample_count, 1);
> + uint32_t correction = (sc->stts_data[i].duration > drift) ? drift : sc->stts_data[i].duration - 1;
> + current_dts -= correction * sample_count;
> + sc->stts_data[i].duration -= correction;
> + }
> +
> + duration+=(int64_t)sc->stts_data[i].duration*(uint64_t)sc->stts_data[i].count;
> + total_sample_count+=sc->stts_data[i].count;
> }
>
> sc->stts_count = i;
> @@ -3856,13 +3881,10 @@ static void mov_build_index(MOVContext *mov, AVStream *st)
> unsigned int distance = 0;
> unsigned int rap_group_index = 0;
> unsigned int rap_group_sample = 0;
> - int64_t last_dts = 0;
> - int64_t dts_correction = 0;
> int rap_group_present = sc->rap_group_count && sc->rap_group;
> int key_off = (sc->keyframe_count && sc->keyframes[0] > 0) || (sc->stps_count && sc->stps_data[0] > 0);
>
> current_dts -= sc->dts_shift;
> - last_dts = current_dts;
>
> if (!sc->sample_count || sti->nb_index_entries)
> return;
> @@ -3973,26 +3995,8 @@ static void mov_build_index(MOVContext *mov, AVStream *st)
> current_offset += sample_size;
> stream_size += sample_size;
>
> - /* A negative sample duration is invalid based on the spec,
> - * but some samples need it to correct the DTS. */
> - if (sc->stts_data[stts_index].duration < 0) {
> - av_log(mov->fc, AV_LOG_WARNING,
> - "Invalid SampleDelta %d in STTS, at %d st:%d\n",
> - sc->stts_data[stts_index].duration, stts_index,
> - st->index);
> - dts_correction += sc->stts_data[stts_index].duration - 1;
> - sc->stts_data[stts_index].duration = 1;
> - }
> current_dts += sc->stts_data[stts_index].duration;
> - if (!dts_correction || current_dts + dts_correction > last_dts) {
> - current_dts += dts_correction;
> - dts_correction = 0;
> - } else {
> - /* Avoid creating non-monotonous DTS */
> - dts_correction += current_dts - last_dts - 1;
> - current_dts = last_dts + 1;
> - }
> - last_dts = current_dts;
> +
> distance++;
> stts_sample++;
> current_sample++;
> @@ -8577,6 +8581,7 @@ static const AVOption mov_options[] = {
> { "decryption_key", "The media decryption key (hex)", OFFSET(decryption_key), AV_OPT_TYPE_BINARY, .flags = AV_OPT_FLAG_DECODING_PARAM },
> { "enable_drefs", "Enable external track support.", OFFSET(enable_drefs), AV_OPT_TYPE_BOOL,
> {.i64 = 0}, 0, 1, FLAGS },
> + { "max_stts_delta", "treat offsets above this value as invalid", OFFSET(max_stts_delta), AV_OPT_TYPE_INT, {.i64 = UINT_MAX-48000*10 }, 0, UINT_MAX, .flags = AV_OPT_FLAG_DECODING_PARAM },
>
> { NULL },
> };
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
prev parent reply other threads:[~2021-12-31 9:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-28 16:42 Gyan Doshi
2021-12-31 9:21 ` Gyan Doshi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c8502d60-cb58-52a1-a234-7cdd8ad5941c@gyani.pro \
--to=ffmpeg@gyani.pro \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git