From: Marton Balint <cus@passwd.hu>
To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org>
Subject: Re: [FFmpeg-devel] [PATCH] Add float user_rdiv[4] to allow user options to apply correctly
Date: Sun, 25 Feb 2024 00:34:34 +0100 (CET)
Message-ID: <bc84bd28-e8fd-36c4-35c4-cc74d38c45a9@passwd.hu> (raw)
In-Reply-To: <CAHpaCCisyCs1x2BxVRAPtJuZE7-Q9kjdLiOomCPt5kectmO3EQ@mail.gmail.com>
On Sat, 24 Feb 2024, Stone Chen wrote:
> On Sat, Feb 24, 2024 at 3:56 PM Marton Balint <cus@passwd.hu> wrote:
>
>>
>>
>> On Sat, 24 Feb 2024, Stone Chen wrote:
>>
>> > Previously to support dynamic reconfigurations of the matrix string
>> (e.g. 0m), the rdiv values would always be cleared to 0.f, causing the rdiv
>> to be recalculated based on the new filter. This however had the side
>> effect of always ignoring user specified rdiv values.
>> >
>> > Instead float user_rdiv[0] is added to ConvolutionContext which will
>> store the user specified rdiv values. Then the original rdiv array will
>> store either the user_rdiv or the automatically calculated 1/sum.
>> >
>> > This fixes trac #10294, #10867
>>
>> Have you tested?
>>
>> Thanks,
>> Marton
>>
>
>
> Hi Marton,
>
> Yes I've tested that
>
> - the original behavior works (automatically calculate rdiv if user_rdiv
> = 0)
> - setting the rdiv value works
It does not work for me even after applying your patch.
Regards,
Marton
> - both work via sendcmd
> - make fate runs with no errors
>
> Cheers,
> Stone
>
>
>
>> > ---
>> > libavfilter/convolution.h | 3 ++-
>> > libavfilter/vf_convolution.c | 9 +++++----
>> > 2 files changed, 7 insertions(+), 5 deletions(-)
>> >
>> > diff --git a/libavfilter/convolution.h b/libavfilter/convolution.h
>> > index e44bfb5da8..ee7477ef89 100644
>> > --- a/libavfilter/convolution.h
>> > +++ b/libavfilter/convolution.h
>> > @@ -34,13 +34,14 @@ typedef struct ConvolutionContext {
>> > const AVClass *class;
>> >
>> > char *matrix_str[4];
>> > - float rdiv[4];
>> > + float user_rdiv[4];
>> > float bias[4];
>> > int mode[4];
>> > float scale;
>> > float delta;
>> > int planes;
>> >
>> > + float rdiv[4];
>> > int size[4];
>> > int depth;
>> > int max;
>> > diff --git a/libavfilter/vf_convolution.c b/libavfilter/vf_convolution.c
>> > index a00bb2b3c4..96c478d791 100644
>> > --- a/libavfilter/vf_convolution.c
>> > +++ b/libavfilter/vf_convolution.c
>> > @@ -40,10 +40,10 @@ static const AVOption convolution_options[] = {
>> > { "1m", "set matrix for 2nd plane", OFFSET(matrix_str[1]),
>> AV_OPT_TYPE_STRING, {.str="0 0 0 0 1 0 0 0 0"}, 0, 0, FLAGS },
>> > { "2m", "set matrix for 3rd plane", OFFSET(matrix_str[2]),
>> AV_OPT_TYPE_STRING, {.str="0 0 0 0 1 0 0 0 0"}, 0, 0, FLAGS },
>> > { "3m", "set matrix for 4th plane", OFFSET(matrix_str[3]),
>> AV_OPT_TYPE_STRING, {.str="0 0 0 0 1 0 0 0 0"}, 0, 0, FLAGS },
>> > - { "0rdiv", "set rdiv for 1st plane", OFFSET(rdiv[0]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > - { "1rdiv", "set rdiv for 2nd plane", OFFSET(rdiv[1]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > - { "2rdiv", "set rdiv for 3rd plane", OFFSET(rdiv[2]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > - { "3rdiv", "set rdiv for 4th plane", OFFSET(rdiv[3]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > + { "0rdiv", "set rdiv for 1st plane", OFFSET(user_rdiv[0]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > + { "1rdiv", "set rdiv for 2nd plane", OFFSET(user_rdiv[1]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > + { "2rdiv", "set rdiv for 3rd plane", OFFSET(user_rdiv[2]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > + { "3rdiv", "set rdiv for 4th plane", OFFSET(user_rdiv[3]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > { "0bias", "set bias for 1st plane", OFFSET(bias[0]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > { "1bias", "set bias for 2nd plane", OFFSET(bias[1]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > { "2bias", "set bias for 3rd plane", OFFSET(bias[2]),
>> AV_OPT_TYPE_FLOAT, {.dbl=0.0}, 0.0, INT_MAX, FLAGS},
>> > @@ -669,6 +669,7 @@ static int param_init(AVFilterContext *ctx)
>> > for (i = 0; i < 4; i++) {
>> > int *matrix = (int *)s->matrix[i];
>> > char *orig, *p, *arg, *saveptr = NULL;
>> > + s->rdiv[i] = s->user_rdiv[i];
>> > float sum = 1.f;
>> >
>> > p = orig = av_strdup(s->matrix_str[i]);
>> > --
>> > 2.43.2
>> >
>> > _______________________________________________
>> > ffmpeg-devel mailing list
>> > ffmpeg-devel@ffmpeg.org
>> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>> >
>> > To unsubscribe, visit link above, or email
>> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
>> >
>> _______________________________________________
>> ffmpeg-devel mailing list
>> ffmpeg-devel@ffmpeg.org
>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>>
>> To unsubscribe, visit link above, or email
>> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
>>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2024-02-24 23:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <3601973235488930945@unknownmsgid>
2024-02-24 15:49 ` Stone Chen
2024-02-24 16:16 ` Stone Chen
2024-02-24 20:56 ` Marton Balint
2024-02-24 22:09 ` Stone Chen
2024-02-24 23:34 ` Marton Balint [this message]
2024-02-25 0:02 ` Stone Chen
2024-02-25 2:03 ` Marton Balint
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bc84bd28-e8fd-36c4-35c4-cc74d38c45a9@passwd.hu \
--to=cus@passwd.hu \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git