From: Timo Rothenpieler <timo@rothenpieler.org>
To: ffmpeg-devel@ffmpeg.org
Subject: Re: [FFmpeg-devel] [PATCH v2 2/8] avformat/udp: make recv addr of each packet available
Date: Mon, 7 Jul 2025 13:28:23 +0200
Message-ID: <b42902d2-4143-4700-937f-a2b06af65a00@rothenpieler.org> (raw)
In-Reply-To: <3FAF03D4-4B0B-4257-8A6A-AF9E2C89622F@gmail.com>
On 07/07/2025 10:03, Jack Lau wrote:
>
>
>> On Jul 7, 2025, at 02:36, Timo Rothenpieler <timo@rothenpieler.org> wrote:
>>
>> ---
>> libavformat/network.h | 2 ++
>> libavformat/udp.c | 25 +++++++++++++++++--------
>> 2 files changed, 19 insertions(+), 8 deletions(-)
>>
>> diff --git a/libavformat/network.h b/libavformat/network.h
>> index ca214087fc..48bb75a758 100644
>> --- a/libavformat/network.h
>> +++ b/libavformat/network.h
>> @@ -338,4 +338,6 @@ int ff_connect_parallel(struct addrinfo *addrs, int timeout_ms_per_address,
>> int parallel, URLContext *h, int *fd,
>> int (*customize_fd)(void *, int, int), void *customize_ctx);
>>
>> +void ff_udp_get_last_recv_addr(URLContext *h, struct sockaddr_storage *addr);
>> +
>> #endif /* AVFORMAT_NETWORK_H */
>> diff --git a/libavformat/udp.c b/libavformat/udp.c
>> index 30f075de8e..7d64ff07ed 100644
>> --- a/libavformat/udp.c
>> +++ b/libavformat/udp.c
>> @@ -107,7 +107,7 @@ typedef struct UDPContext {
>> pthread_cond_t cond;
>> int thread_started;
>> #endif
>> - uint8_t tmp[UDP_MAX_PKT_SIZE+4];
>> + uint8_t tmp[UDP_MAX_PKT_SIZE + 4 + sizeof(struct sockaddr_storage)];
>> int remaining_in_dg;
>> char *localaddr;
>> int timeout;
>> @@ -115,6 +115,7 @@ typedef struct UDPContext {
>> char *sources;
>> char *block;
>> IPSourceFilters filters;
>> + struct sockaddr_storage last_recv_addr;
>> } UDPContext;
>>
>> #define OFFSET(x) offsetof(UDPContext, x)
>> @@ -467,6 +468,12 @@ int ff_udp_get_local_port(URLContext *h)
>> return s->local_port;
>> }
>>
>> +void ff_udp_get_last_recv_addr(URLContext *h, struct sockaddr_storage *addr)
>> +{
>> + UDPContext *s = h->priv_data;
>> + *addr = s->last_recv_addr;
>> +}
>> +
>> /**
>> * Return the udp file handle for select() usage to wait for several RTP
>> * streams at the same time.
>> @@ -498,13 +505,14 @@ static void *circular_buffer_task_rx( void *_URLContext)
>> int len;
>> struct sockaddr_storage addr;
>> socklen_t addr_len = sizeof(addr);
>> + const int header_sz = 4 + addr_len;
>>
>> pthread_mutex_unlock(&s->mutex);
>> /* Blocking operations are always cancellation points;
>> see "General Information" / "Thread Cancelation Overview"
>> in Single Unix. */
>> pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, &old_cancelstate);
>> - len = recvfrom(s->udp_fd, s->tmp+4, sizeof(s->tmp)-4, 0, (struct sockaddr *)&addr, &addr_len);
>> + len = recvfrom(s->udp_fd, s->tmp + header_sz, sizeof(s->tmp) - header_sz, 0, (struct sockaddr *)&addr, &addr_len);
>> pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &old_cancelstate);
>> pthread_mutex_lock(&s->mutex);
>> if (len < 0) {
>> @@ -517,8 +525,9 @@ static void *circular_buffer_task_rx( void *_URLContext)
>> if (ff_ip_check_source_lists(&addr, &s->filters))
>> continue;
>> AV_WL32(s->tmp, len);
>> + memcpy(s->tmp + 4, &addr, sizeof(addr));
>>
>> - if (av_fifo_can_write(s->fifo) < len + 4) {
>> + if (av_fifo_can_write(s->fifo) < len + header_sz) {
>> /* No Space left */
>> if (s->overrun_nonfatal) {
>> av_log(h, AV_LOG_WARNING, "Circular buffer overrun. "
>> @@ -532,7 +541,7 @@ static void *circular_buffer_task_rx( void *_URLContext)
>> goto end;
>> }
>> }
>> - av_fifo_write(s->fifo, s->tmp, len + 4);
>> + av_fifo_write(s->fifo, s->tmp, len + header_sz);
>> pthread_cond_signal(&s->cond);
>> }
>>
>> @@ -991,8 +1000,7 @@ static int udp_read(URLContext *h, uint8_t *buf, int size)
>> {
>> UDPContext *s = h->priv_data;
>> int ret;
>> - struct sockaddr_storage addr;
>> - socklen_t addr_len = sizeof(addr);
>> + socklen_t addr_len = sizeof(s->last_recv_addr);
>> #if HAVE_PTHREAD_CANCEL
>> int avail, nonblock = h->flags & AVIO_FLAG_NONBLOCK;
>>
>> @@ -1004,6 +1012,7 @@ static int udp_read(URLContext *h, uint8_t *buf, int size)
>> uint8_t tmp[4];
>>
>> av_fifo_read(s->fifo, tmp, 4);
>> + av_fifo_read(s->fifo, &s->last_recv_addr, sizeof(s->last_recv_addr));
>> avail = AV_RL32(tmp);
>> if(avail > size){
>> av_log(h, AV_LOG_WARNING, "Part of datagram lost due to insufficient buffer size\n");
>> @@ -1043,10 +1052,10 @@ static int udp_read(URLContext *h, uint8_t *buf, int size)
>> if (ret < 0)
>> return ret;
>> }
>> - ret = recvfrom(s->udp_fd, buf, size, 0, (struct sockaddr *)&addr, &addr_len);
>> + ret = recvfrom(s->udp_fd, buf, size, 0, (struct sockaddr *)&s->last_recv_addr, &addr_len);
>> if (ret < 0)
>> return ff_neterrno();
>> - if (ff_ip_check_source_lists(&addr, &s->filters))
>> + if (ff_ip_check_source_lists(&s->last_recv_addr, &s->filters))
>> return AVERROR(EINTR);
>> return ret;
>> }
>> --
>> 2.49.0
>>
>> _______________________________________________
>> ffmpeg-devel mailing list
>> ffmpeg-devel@ffmpeg.org
>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>>
>> To unsubscribe, visit link above, or email
>> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe”.
> I think it’s necessary to add "socklen_t last_recv_len".
> I’ve send the fixes to your GitHub repo https://github.com/BtbN/FFmpeg/pull/3 because my fixes depends your patchset.
Anything that needs the len can just get sizeof(sockaddr_storage), can't it?
Getting bigger than neccesary of a size won't break anything, as long as
it isn't too small.
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2025-07-07 11:28 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-06 18:36 [FFmpeg-devel] [PATCH v2 0/8] WHIP + TLS + UDP fixes and SChannel DTLS support Timo Rothenpieler
2025-07-06 18:36 ` [FFmpeg-devel] [PATCH v2 1/8] avformat/tls: move whip specific init out of generic tls code Timo Rothenpieler
2025-07-07 6:30 ` Jack Lau
2025-07-07 11:26 ` Timo Rothenpieler
2025-07-07 12:33 ` Jack Lau
2025-07-06 18:36 ` [FFmpeg-devel] [PATCH v2 2/8] avformat/udp: make recv addr of each packet available Timo Rothenpieler
2025-07-07 8:03 ` Jack Lau
2025-07-07 11:28 ` Timo Rothenpieler [this message]
2025-07-07 12:36 ` Jack Lau
2025-07-06 18:36 ` [FFmpeg-devel] [PATCH v2 3/8] avformat/udp: separate rx and tx fifo Timo Rothenpieler
2025-07-06 18:36 ` [FFmpeg-devel] [PATCH v2 4/8] avformat/udp: add function to set remote address directly Timo Rothenpieler
2025-07-06 18:36 ` [FFmpeg-devel] [PATCH v2 5/8] avformat/tls: make passing an external socket universal Timo Rothenpieler
2025-07-06 18:36 ` [FFmpeg-devel] [PATCH v2 6/8] avformat/tls_schannel: add DTLS support Timo Rothenpieler
2025-07-06 18:36 ` [FFmpeg-devel] [PATCH v2 7/8] avformat/tls_schannel: add option to load server certificate from store Timo Rothenpieler
2025-07-06 18:36 ` [FFmpeg-devel] [PATCH v2 8/8] avformat/tls_schannel: fix non-blocking write breaking TLS sessions Timo Rothenpieler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b42902d2-4143-4700-937f-a2b06af65a00@rothenpieler.org \
--to=timo@rothenpieler.org \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git