From: Lynne via ffmpeg-devel <ffmpeg-devel@ffmpeg.org>
To: ffmpeg-devel@ffmpeg.org
Cc: Lynne <dev@lynne.ee>
Subject: Re: [FFmpeg-devel] [PATCH 5/6] fftools/ffmpeg: support applying container level cropping
Date: Fri, 31 May 2024 03:13:26 +0200
Message-ID: <ac90ca68-2757-45bb-88f1-686ae9188b45@lynne.ee> (raw)
In-Reply-To: <8d670e76-1b41-4139-b8dc-d00a1aae75bc@gmail.com>
[-- Attachment #1.1.1.1: Type: text/plain, Size: 6509 bytes --]
On 30/05/2024 03:04, James Almer wrote:
> On 5/29/2024 10:01 PM, Lynne via ffmpeg-devel wrote:
>> On 29/05/2024 23:46, James Almer wrote:
>>> Signed-off-by: James Almer <jamrial@gmail.com>
>>> ---
>>> fftools/ffmpeg.h | 7 +++++++
>>> fftools/ffmpeg_demux.c | 16 ++++++++++++++++
>>> fftools/ffmpeg_filter.c | 11 +++++++++++
>>> fftools/ffmpeg_opt.c | 3 +++
>>> 4 files changed, 37 insertions(+)
>>>
>>> diff --git a/fftools/ffmpeg.h b/fftools/ffmpeg.h
>>> index fe75706afd..f908e16549 100644
>>> --- a/fftools/ffmpeg.h
>>> +++ b/fftools/ffmpeg.h
>>> @@ -155,6 +155,7 @@ typedef struct OptionsContext {
>>> SpecifierOptList hwaccel_devices;
>>> SpecifierOptList hwaccel_output_formats;
>>> SpecifierOptList autorotate;
>>> + SpecifierOptList apply_cropping;
>>> /* output options */
>>> StreamMap *stream_maps;
>>> @@ -239,6 +240,7 @@ enum IFilterFlags {
>>> IFILTER_FLAG_AUTOROTATE = (1 << 0),
>>> IFILTER_FLAG_REINIT = (1 << 1),
>>> IFILTER_FLAG_CFR = (1 << 2),
>>> + IFILTER_FLAG_CROP = (1 << 3),
>>> };
>>> typedef struct InputFilterOptions {
>>> @@ -254,6 +256,11 @@ typedef struct InputFilterOptions {
>>> * accurate */
>>> AVRational framerate;
>>> + unsigned crop_top;
>>> + unsigned crop_bottom;
>>> + unsigned crop_left;
>>> + unsigned crop_right;
>>> +
>>> int sub2video_width;
>>> int sub2video_height;
>>> diff --git a/fftools/ffmpeg_demux.c b/fftools/ffmpeg_demux.c
>>> index 1ca8d804ae..4178b8f840 100644
>>> --- a/fftools/ffmpeg_demux.c
>>> +++ b/fftools/ffmpeg_demux.c
>>> @@ -66,6 +66,7 @@ typedef struct DemuxStream {
>>> int have_sub2video;
>>> int reinit_filters;
>>> int autorotate;
>>> + int apply_cropping;
>>> int wrap_correction_done;
>>> @@ -1000,11 +1001,20 @@ int ist_filter_add(InputStream *ist,
>>> InputFilter *ifilter, int is_simple,
>>> ist->filters[ist->nb_filters - 1] = ifilter;
>>> if (ist->par->codec_type == AVMEDIA_TYPE_VIDEO) {
>>> + const AVPacketSideData *sd =
>>> av_packet_side_data_get(ist->st->codecpar->coded_side_data,
>>> + ist->st->codecpar->nb_coded_side_data,
>>> + AV_PKT_DATA_FRAME_CROPPING);
>>> if (ist->framerate.num > 0 && ist->framerate.den > 0) {
>>> opts->framerate = ist->framerate;
>>> opts->flags |= IFILTER_FLAG_CFR;
>>> } else
>>> opts->framerate = av_guess_frame_rate(d->f.ctx,
>>> ist->st, NULL);
>>> + if (sd && sd->size == sizeof(uint32_t) * 4) {
>>> + opts->crop_top = AV_RL32(sd->data + 0);
>>> + opts->crop_bottom = AV_RL32(sd->data + 4);
>>> + opts->crop_left = AV_RL32(sd->data + 8);
>>> + opts->crop_right = AV_RL32(sd->data + 12);
>>> + }
>>> } else if (ist->par->codec_type == AVMEDIA_TYPE_SUBTITLE) {
>>> /* Compute the size of the canvas for the subtitles stream.
>>> If the subtitles codecpar has set a size, use it.
>>> Otherwise use the
>>> @@ -1059,6 +1069,7 @@ int ist_filter_add(InputStream *ist,
>>> InputFilter *ifilter, int is_simple,
>>> return AVERROR(ENOMEM);
>>> opts->flags |= IFILTER_FLAG_AUTOROTATE * !!(ds->autorotate) |
>>> + IFILTER_FLAG_CROP * !!(ds->apply_cropping) |
>>> IFILTER_FLAG_REINIT * !!(ds->reinit_filters);
>>> return ds->sch_idx_dec;
>>> @@ -1241,6 +1252,9 @@ static int ist_add(const OptionsContext *o,
>>> Demuxer *d, AVStream *st)
>>> ds->autorotate = 1;
>>> MATCH_PER_STREAM_OPT(autorotate, i, ds->autorotate, ic, st);
>>> + ds->apply_cropping = 1;
>>> + MATCH_PER_STREAM_OPT(apply_cropping, i, ds->apply_cropping, ic,
>>> st);
>>> +
>>> MATCH_PER_STREAM_OPT(codec_tags, str, codec_tag, ic, st);
>>> if (codec_tag) {
>>> uint32_t tag = strtol(codec_tag, &next, 0);
>>> @@ -1362,6 +1376,8 @@ static int ist_add(const OptionsContext *o,
>>> Demuxer *d, AVStream *st)
>>> ds->dec_opts.flags |= DECODER_FLAG_BITEXACT * !!o->bitexact;
>>> + av_dict_set_int(&ds->decoder_opts, "apply_cropping",
>>> ds->apply_cropping, 0);
>>> +
>>> /* Attached pics are sparse, therefore we would not want to
>>> delay their decoding
>>> * till EOF. */
>>> if (ist->st->disposition & AV_DISPOSITION_ATTACHED_PIC)
>>> diff --git a/fftools/ffmpeg_filter.c b/fftools/ffmpeg_filter.c
>>> index 12cca684b4..a31fa1be7f 100644
>>> --- a/fftools/ffmpeg_filter.c
>>> +++ b/fftools/ffmpeg_filter.c
>>> @@ -1701,6 +1701,17 @@ static int
>>> configure_input_video_filter(FilterGraph *fg, AVFilterGraph *graph,
>>> desc = av_pix_fmt_desc_get(ifp->format);
>>> av_assert0(desc);
>>> + if ((ifp->opts.flags & IFILTER_FLAG_CROP) &&
>>> + !(desc->flags & AV_PIX_FMT_FLAG_HWACCEL)) {
>>> + char crop_buf[64];
>>> + snprintf(crop_buf, sizeof(crop_buf), "w=iw-%d-%d:h=ih-%d-%d",
>>> + ifp->opts.crop_left, ifp->opts.crop_right,
>>> + ifp->opts.crop_top, ifp->opts.crop_bottom);
>>> + ret = insert_filter(&last_filter, &pad_idx, "crop", crop_buf);
>>> + if (ret < 0)
>>> + return ret;
>>> + }
>>
>> The crop filter supports hardware frames too.
>
> It exports the values within the AVFrame fields. If that's acceptable
> then i can remove this check.
Sure, that's acceptable. If anything, it would help get better support
for AVFrame's crop fields through the codebase.
[-- Attachment #1.1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 637 bytes --]
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 236 bytes --]
[-- Attachment #2: Type: text/plain, Size: 251 bytes --]
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2024-05-31 1:13 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-29 21:46 [FFmpeg-devel] [PATCH 1/6] avcodec/packet: add a decoded frame cropping side data type James Almer
2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 2/6] avformat/dump: print Frame Cropping side data info James Almer
2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 3/6] avformat/matroskadec: export cropping values James Almer
2024-06-01 11:24 ` Kacper Michajlow
2024-07-05 20:51 ` James Almer
2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 4/6] avformat/matroskaenc: support writing " James Almer
2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 5/6] fftools/ffmpeg: support applying container level cropping James Almer
2024-05-30 1:01 ` Lynne via ffmpeg-devel
2024-05-30 1:04 ` James Almer
2024-05-31 1:13 ` Lynne via ffmpeg-devel [this message]
2024-05-30 22:57 ` Michael Niedermayer
2024-05-30 23:22 ` [FFmpeg-devel] [PATCH 1/2 v2] " James Almer
2024-06-25 10:25 ` Anton Khirnov
2024-06-25 12:38 ` James Almer
2024-06-25 13:12 ` Anton Khirnov
2024-06-25 13:23 ` Paul B Mahol
2024-06-25 13:54 ` Anton Khirnov
2024-06-25 10:19 ` [FFmpeg-devel] [PATCH 5/6] " Anton Khirnov
2024-07-02 16:49 ` [FFmpeg-devel] [PATCH 5/6 v3] " James Almer
2024-07-02 17:55 ` Anton Khirnov
2024-07-02 18:43 ` James Almer
2024-07-02 19:00 ` Anton Khirnov
2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 6/6] fftools/ffplay: " James Almer
2024-05-30 1:02 ` [FFmpeg-devel] [PATCH 1/6] avcodec/packet: add a decoded frame cropping side data type Lynne via ffmpeg-devel
2024-05-30 1:08 ` James Almer
2024-06-25 18:13 ` Andreas Rheinhardt
2024-06-25 18:17 ` James Almer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ac90ca68-2757-45bb-88f1-686ae9188b45@lynne.ee \
--to=ffmpeg-devel@ffmpeg.org \
--cc=dev@lynne.ee \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git