From: Timo Rothenpieler <timo@rothenpieler.org> To: ffmpeg-devel@ffmpeg.org Subject: Re: [FFmpeg-devel] [PATCH v2 2/3] avcodec/utils: use new ff_timecode_set_smpte function Date: Fri, 28 Feb 2025 23:49:43 +0100 Message-ID: <a027469b-ca7e-487d-967f-18ee203e8ffa@rothenpieler.org> (raw) In-Reply-To: <20250228224640.30747-2-timo@rothenpieler.org> On 28.02.2025 23:46, Timo Rothenpieler wrote: > --- > libavcodec/Makefile | 2 ++ > libavcodec/timecode_internal.c | 19 +++++++++++++++++++ > libavcodec/utils.c | 29 +++-------------------------- > libavutil/Makefile | 3 +++ > 4 files changed, 27 insertions(+), 26 deletions(-) > create mode 100644 libavcodec/timecode_internal.c > > diff --git a/libavcodec/Makefile b/libavcodec/Makefile > index 499f826635..e3ccbf1838 100644 > --- a/libavcodec/Makefile > +++ b/libavcodec/Makefile > @@ -64,6 +64,8 @@ OBJS = ac3_parser.o \ > vorbis_parser.o \ > xiph.o \ > > +SHLIBOBJS = timecode_internal.o \ > + > # subsystems > include $(SRC_PATH)/libavcodec/aac/Makefile > include $(SRC_PATH)/libavcodec/hevc/Makefile > diff --git a/libavcodec/timecode_internal.c b/libavcodec/timecode_internal.c > new file mode 100644 > index 0000000000..8682bb1b2e > --- /dev/null > +++ b/libavcodec/timecode_internal.c > @@ -0,0 +1,19 @@ > +/* > + * This file is part of FFmpeg. > + * > + * FFmpeg is free software; you can redistribute it and/or > + * modify it under the terms of the GNU Lesser General Public > + * License as published by the Free Software Foundation; either > + * version 2.1 of the License, or (at your option) any later version. > + * > + * FFmpeg is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * Lesser General Public License for more details. > + * > + * You should have received a copy of the GNU Lesser General Public > + * License along with FFmpeg; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA > + */ > + > +#include "libavutil/timecode_internal.c" > diff --git a/libavcodec/utils.c b/libavcodec/utils.c > index dd846b4ae9..0aa5a6f55e 100644 > --- a/libavcodec/utils.c > +++ b/libavcodec/utils.c > @@ -33,6 +33,7 @@ > #include "libavutil/pixdesc.h" > #include "libavutil/imgutils.h" > #include "libavutil/pixfmt.h" > +#include "libavutil/timecode_internal.h" > #include "avcodec.h" > #include "codec.h" > #include "codec_desc.h" > @@ -968,15 +969,6 @@ AVCPBProperties *av_cpb_properties_alloc(size_t *size) > return props; > } > > -static unsigned bcd2uint(uint8_t bcd) > -{ > - unsigned low = bcd & 0xf; > - unsigned high = bcd >> 4; > - if (low > 9 || high > 9) > - return 0; > - return low + 10*high; > -} > - > int ff_alloc_timecode_sei(const AVFrame *frame, AVRational rate, size_t prefix_len, > void **data, size_t *sei_size) > { > @@ -1006,23 +998,8 @@ int ff_alloc_timecode_sei(const AVFrame *frame, AVRational rate, size_t prefix_l > put_bits(&pb, 2, m); // num_clock_ts > > for (int j = 1; j <= m; j++) { > - uint32_t tcsmpte = tc[j]; > - unsigned hh = bcd2uint(tcsmpte & 0x3f); // 6-bit hours > - unsigned mm = bcd2uint(tcsmpte>>8 & 0x7f); // 7-bit minutes > - unsigned ss = bcd2uint(tcsmpte>>16 & 0x7f); // 7-bit seconds > - unsigned ff = bcd2uint(tcsmpte>>24 & 0x3f); // 6-bit frames > - unsigned drop = tcsmpte & 1<<30 && !0; // 1-bit drop if not arbitrary bit > - > - /* Calculate frame number of HEVC by SMPTE ST 12-1:2014 Sec 12.2 if rate > 30FPS */ > - if (av_cmp_q(rate, (AVRational) {30, 1}) == 1) { > - unsigned pc; > - ff *= 2; > - if (av_cmp_q(rate, (AVRational) {50, 1}) == 0) > - pc = !!(tcsmpte & 1 << 7); > - else > - pc = !!(tcsmpte & 1 << 23); > - ff = (ff + pc) & 0x7f; > - } > + unsigned hh, mm, ss, ff, drop; > + ff_timecode_set_smpte(&drop, &hh, &mm, &ss, &ff, rate, tc[j], 0, 0); > > put_bits(&pb, 1, 1); // clock_timestamp_flag > put_bits(&pb, 1, 1); // units_field_based_flag > diff --git a/libavutil/Makefile b/libavutil/Makefile > index b2b3b9c156..ad534a8acc 100644 > --- a/libavutil/Makefile > +++ b/libavutil/Makefile > @@ -180,6 +180,7 @@ OBJS = adler32.o \ > threadmessage.o \ > time.o \ > timecode.o \ > + timecode_internal.o \ This line belongs into the first patch, fixed locally. > timestamp.o \ > tree.o \ > twofish.o \ > @@ -196,6 +197,8 @@ OBJS = adler32.o \ > video_enc_params.o \ > video_hint.o \ > > +STLIBOBJS = timecode_internal.o \ > + > > OBJS-$(CONFIG_CUDA) += hwcontext_cuda.o > OBJS-$(CONFIG_D3D11VA) += hwcontext_d3d11va.o _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2025-02-28 22:49 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2025-02-28 22:46 [FFmpeg-devel] [PATCH v2 1/3] avutil/timecode: add ff_timecode_set_smpte Timo Rothenpieler 2025-02-28 22:46 ` [FFmpeg-devel] [PATCH v2 2/3] avcodec/utils: use new ff_timecode_set_smpte function Timo Rothenpieler 2025-02-28 22:49 ` Timo Rothenpieler [this message] 2025-02-28 22:46 ` [FFmpeg-devel] [PATCH v2 3/3] avcodec/nvenc: add time code writing for h264 Timo Rothenpieler
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=a027469b-ca7e-487d-967f-18ee203e8ffa@rothenpieler.org \ --to=timo@rothenpieler.org \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git