Re: [FFmpeg-devel] [PATCH v5 1/2] lavc/vaapi_encode: add support for maxframesize

["Wang, Fei W" <fei.w.wang-at-intel.com@ffmpeg.org>]

> -----Original Message-----
> From: Xiang, Haihao <haihao.xiang@intel.com>
> Sent: Friday, April 29, 2022 1:18 PM
> To: ffmpeg-devel@ffmpeg.org
> Cc: Wang, Fei W <fei.w.wang@intel.com>; linjie.fu@intel.com
> Subject: Re: [FFmpeg-devel] [PATCH v5 1/2] lavc/vaapi_encode: add support for
> maxframesize
> 
> On Fri, 2022-04-22 at 13:36 +0800, Fei Wang wrote:
> > From: Linjie Fu <linjie.fu@intel.com>
> >
> > Add support for max frame size:
> >     - max_frame_size (bytes) to indicate the max allowed size for frame.
> >
> > If the frame size exceeds the limitation, encoder will to control the
> > frame size by adjusting QP value.
> >
> > ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 -f rawvideo \
> >         -v verbose -s:v 352x288 -i ./input.yuv -vf format=nv12,hwupload \
> >         -c:v h264_vaapi -profile:v main -g 30 -rc_mode VBR -b:v 500k   \
> >         -bf 3 -max_frame_size 40000 -vframes 100 -y
> > ./max_frame_size.h264
> >
> > Max frame size was enabled since VA-API version (0, 33, 0), but query
> > is available since (1, 5, 0). It will be passed as a parameter in
> > picParam and should be set for each frame.
> >
> > Signed-off-by: Linjie Fu <linjie.fu@intel.com>
> > Signed-off-by: Fei Wang <fei.w.wang@intel.com>
> > ---
> > Change:
> > 1. use VAEncMiscParameterTypeMaxFrameSize to set max frame
> > parameters, which is a more generic way.
> >
> >  libavcodec/vaapi_encode.c | 65
> > +++++++++++++++++++++++++++++++++++++++
> >  libavcodec/vaapi_encode.h | 10 +++++-
> >  2 files changed, 74 insertions(+), 1 deletion(-)
> >
> > diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c
> > index 0e2f5ed447..c2a39bc4ed 100644
> > --- a/libavcodec/vaapi_encode.c
> > +++ b/libavcodec/vaapi_encode.c
> > @@ -365,6 +365,17 @@ static int vaapi_encode_issue(AVCodecContext
> *avctx,
> >              goto fail;
> >      }
> >
> > +#if VA_CHECK_VERSION(1, 5, 0)
> > +    if (ctx->max_frame_size) {
> > +        err = vaapi_encode_make_misc_param_buffer(avctx, pic,
> > +
> > +VAEncMiscParameterTypeMaxFr
> > ameSize,
> > +                                                  &ctx->mfs_params,
> > +                                                  sizeof(ctx->mfs_params));
> > +        if (err < 0)
> > +            goto fail;
> > +    }
> > +#endif
> > +
> >      if (pic->type == PICTURE_TYPE_IDR) {
> >          if (ctx->va_packed_headers & VA_ENC_PACKED_HEADER_SEQUENCE &&
> >              ctx->codec->write_sequence_header) { @@ -1869,6 +1880,54
> > @@ rc_mode_found:
> >      return 0;
> >  }
> >
> > +static av_cold int vaapi_encode_init_max_frame_size(AVCodecContext
> > +*avctx) { #if VA_CHECK_VERSION(1, 5, 0)
> > +    VAAPIEncodeContext  *ctx = avctx->priv_data;
> > +    VAConfigAttrib      attr = { VAConfigAttribMaxFrameSize };
> > +    VAStatus vas;
> > +
> > +    vas = vaGetConfigAttributes(ctx->hwctx->display,
> > +                                ctx->va_profile,
> > +                                ctx->va_entrypoint,
> > +                                &attr, 1);
> > +    if (vas != VA_STATUS_SUCCESS) {
> > +        ctx->max_frame_size = 0;
> > +        av_log(avctx, AV_LOG_ERROR, "Failed to query max frame size "
> > +               "config attribute: %d (%s).\n", vas, vaErrorStr(vas));
> > +        return AVERROR_EXTERNAL;
> > +    }
> > +
> > +    if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
> > +        ctx->max_frame_size = 0;
> > +        av_log(avctx, AV_LOG_WARNING, "Max frame size attribute "
> > +               "is not supported.\n");
> > +    } else {
> > +        VAConfigAttribValMaxFrameSize attr_mfs;
> > +        attr_mfs.value = attr.value;
> > +        // Prefer to use VAEncMiscParameterTypeMaxFrameSize for max
> > + frame
> > size.
> > +        if (!attr_mfs.bits.max_frame_size && attr_mfs.bits.multiple_pass) {
> > +            ctx->max_frame_size = 0;
> > +            av_log(avctx, AV_LOG_WARNING, "Driver only support
> > + multiple pass
> > "
> > +                   "max frame size which have not been implemented in
> > FFmpeg.\n");
> > +            return 0;
> > +        }
> > +
> > +        ctx->mfs_params = (VAEncMiscParameterBufferMaxFrameSize){
> > +            .max_frame_size = ctx->max_frame_size * 8,
> > +        };
> > +
> > +        av_log(avctx, AV_LOG_VERBOSE, "Max Frame Size: %d bytes.\n",
> > +               ctx->max_frame_size);
> > +    }
> > +#else
> > +    av_log(avctx, AV_LOG_WARNING, "Max Frame Size is not support with "
> > +           "this VA version.\n");
> > +#endif
> > +
> > +    return 0;
> > +}
> > +
> >  static av_cold int vaapi_encode_init_gop_structure(AVCodecContext
> > *avctx)  {
> >      VAAPIEncodeContext *ctx = avctx->priv_data; @@ -2548,6 +2607,12
> > @@ av_cold int ff_vaapi_encode_init(AVCodecContext *avctx)
> >              goto fail;
> >      }
> >
> > +    if (ctx->va_rc_mode != VA_RC_CQP && ctx->max_frame_size) {
> > +        err = vaapi_encode_init_max_frame_size(avctx);
> > +        if (err < 0)
> > +            goto fail;
> > +    }
> 
> Set ctx->max_frame_size to 0 for CQP, otherwise
> VAEncMiscParameterTypeMaxFrameSize will be passed to the underlying driver
> for CQP when ctx->max_frame_size is non-zero.

Thanks Haihao. Fixed in V6.

Thanks
Fei

> 
> Thanks
> Haihao
> 
> > +
> >      vas = vaCreateConfig(ctx->hwctx->display,
> >                           ctx->va_profile, ctx->va_entrypoint,
> >                           ctx->config_attributes,
> > ctx->nb_config_attributes, diff --git a/libavcodec/vaapi_encode.h
> > b/libavcodec/vaapi_encode.h index af0588c30b..359f954fff 100644
> > --- a/libavcodec/vaapi_encode.h
> > +++ b/libavcodec/vaapi_encode.h
> > @@ -191,6 +191,9 @@ typedef struct VAAPIEncodeContext {
> >      // Desired B frame reference depth.
> >      int             desired_b_depth;
> >
> > +    // Max Frame Size
> > +    int             max_frame_size;
> > +
> >      // Explicitly set RC mode (otherwise attempt to pick from
> >      // available modes).
> >      int             explicit_rc_mode;
> > @@ -268,6 +271,7 @@ typedef struct VAAPIEncodeContext {
> >      VAEncMiscParameterRateControl rc_params;
> >      VAEncMiscParameterHRD        hrd_params;
> >      VAEncMiscParameterFrameRate   fr_params;
> > +    VAEncMiscParameterBufferMaxFrameSize mfs_params;
> >  #if VA_CHECK_VERSION(0, 36, 0)
> >      VAEncMiscParameterBufferQualityLevel quality_params;  #endif @@
> > -478,7 +482,11 @@ int ff_vaapi_encode_close(AVCodecContext *avctx);
> >        "Increase this to improve single channel performance. This option " \
> >        "doesn't work if driver doesn't implement vaSyncBuffer function.", \
> >        OFFSET(common.async_depth), AV_OPT_TYPE_INT, \
> > -      { .i64 = 2 }, 1, MAX_ASYNC_DEPTH, FLAGS }
> > +      { .i64 = 2 }, 1, MAX_ASYNC_DEPTH, FLAGS }, \
> > +    { "max_frame_size", \
> > +      "Maximum frame size (in bytes)",\
> > +      OFFSET(common.max_frame_size), AV_OPT_TYPE_INT, \
> > +      { .i64 = 0 }, 0, INT_MAX, FLAGS }
> >
> >  #define VAAPI_ENCODE_RC_MODE(name, desc) \
> >      { #name, desc, 0, AV_OPT_TYPE_CONST, { .i64 = RC_MODE_ ## name },
> > \
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".