* [FFmpeg-devel] [PATCH] avfilter/framesync: fix forward EOF pts
@ 2024-05-21 19:38 Nicolas Gaullier
2024-05-23 14:39 ` Nicolas Gaullier
0 siblings, 1 reply; 2+ messages in thread
From: Nicolas Gaullier @ 2024-05-21 19:38 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Nicolas Gaullier
Note1: when the EOF pts is not accurate enough, the last frame
can be dropped by vf_fps with default rounding.
Note2: vf_scale use framesync since e82a3997cdd6c0894869b33ba42430ac3,
so this is a very commonplace scenario.
For example:
./ffprobe -f lavfi testsrc=d=1,scale,fps -of flat \
-count_frames -show_entries stream=nb_read_frames
Before:
streams.stream.0.nb_read_frames="24"
After:
streams.stream.0.nb_read_frames="25"
---
libavfilter/framesync.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/libavfilter/framesync.c b/libavfilter/framesync.c
index 535fbe9c7c..28a992ba6d 100644
--- a/libavfilter/framesync.c
+++ b/libavfilter/framesync.c
@@ -103,14 +103,14 @@ int ff_framesync_init(FFFrameSync *fs, AVFilterContext *parent, unsigned nb_in)
return 0;
}
-static void framesync_eof(FFFrameSync *fs)
+static void framesync_eof(FFFrameSync *fs, int64_t pts)
{
fs->eof = 1;
fs->frame_ready = 0;
- ff_outlink_set_status(fs->parent->outputs[0], AVERROR_EOF, AV_NOPTS_VALUE);
+ ff_outlink_set_status(fs->parent->outputs[0], AVERROR_EOF, pts);
}
-static void framesync_sync_level_update(FFFrameSync *fs)
+static void framesync_sync_level_update(FFFrameSync *fs, int64_t eof_pts)
{
unsigned i, level = 0;
@@ -131,7 +131,7 @@ static void framesync_sync_level_update(FFFrameSync *fs)
if (level)
fs->sync_level = level;
else
- framesync_eof(fs);
+ framesync_eof(fs, eof_pts);
}
int ff_framesync_configure(FFFrameSync *fs)
@@ -179,7 +179,7 @@ int ff_framesync_configure(FFFrameSync *fs)
for (i = 0; i < fs->nb_in; i++)
fs->in[i].pts = fs->in[i].pts_next = AV_NOPTS_VALUE;
fs->sync_level = UINT_MAX;
- framesync_sync_level_update(fs);
+ framesync_sync_level_update(fs, AV_NOPTS_VALUE);
return 0;
}
@@ -200,7 +200,7 @@ static int framesync_advance(FFFrameSync *fs)
if (fs->in[i].have_next && fs->in[i].pts_next < pts)
pts = fs->in[i].pts_next;
if (pts == INT64_MAX) {
- framesync_eof(fs);
+ framesync_eof(fs, AV_NOPTS_VALUE);
break;
}
for (i = 0; i < fs->nb_in; i++) {
@@ -222,7 +222,7 @@ static int framesync_advance(FFFrameSync *fs)
fs->frame_ready = 1;
if (fs->in[i].state == STATE_EOF &&
fs->in[i].after == EXT_STOP)
- framesync_eof(fs);
+ framesync_eof(fs, AV_NOPTS_VALUE);
}
}
if (fs->frame_ready)
@@ -255,15 +255,14 @@ static void framesync_inject_frame(FFFrameSync *fs, unsigned in, AVFrame *frame)
fs->in[in].have_next = 1;
}
-static void framesync_inject_status(FFFrameSync *fs, unsigned in, int status, int64_t pts)
+static void framesync_inject_status(FFFrameSync *fs, unsigned in, int status, int64_t eof_pts)
{
av_assert0(!fs->in[in].have_next);
- pts = fs->in[in].state != STATE_RUN || fs->in[in].after == EXT_INFINITY
- ? INT64_MAX : framesync_pts_extrapolate(fs, in, fs->in[in].pts);
fs->in[in].sync = 0;
- framesync_sync_level_update(fs);
+ framesync_sync_level_update(fs, status == AVERROR_EOF ? eof_pts : AV_NOPTS_VALUE);
fs->in[in].frame_next = NULL;
- fs->in[in].pts_next = pts;
+ fs->in[in].pts_next = fs->in[in].state != STATE_RUN || fs->in[in].after == EXT_INFINITY
+ ? INT64_MAX : framesync_pts_extrapolate(fs, in, fs->in[in].pts);
fs->in[in].have_next = 1;
}
--
2.30.2
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [FFmpeg-devel] [PATCH] avfilter/framesync: fix forward EOF pts
2024-05-21 19:38 [FFmpeg-devel] [PATCH] avfilter/framesync: fix forward EOF pts Nicolas Gaullier
@ 2024-05-23 14:39 ` Nicolas Gaullier
0 siblings, 0 replies; 2+ messages in thread
From: Nicolas Gaullier @ 2024-05-23 14:39 UTC (permalink / raw)
To: ffmpeg-devel
>Envoyé : mardi 21 mai 2024 21:39
>
>Note1: when the EOF pts is not accurate enough, the last frame can be dropped by vf_fps with default rounding.
>
>Note2: vf_scale use framesync since e82a3997cdd6c0894869b33ba42430ac3,
>so this is a very commonplace scenario.
>
>For example:
>./ffprobe -f lavfi testsrc=d=1,scale,fps -of flat \
> -count_frames -show_entries stream=nb_read_frames
>
>Before:
>streams.stream.0.nb_read_frames="24"
>
>After:
>streams.stream.0.nb_read_frames="25"
>---
> libavfilter/framesync.c | 23 +++++++++++------------
> 1 file changed, 11 insertions(+), 12 deletions(-)
Ping ?
Here is another straight way to highlight the issue with a format filter auto-inserting a scale filter thus implying framesync:
>ffprobe -v debug -f lavfi testsrc=d=1,format=yuv420p,fps -count_frames
shows:
Before:
[auto_scale_0 @ X] [framesync @ X] Sync level 0
[Parsed_fps_2 @ X] EOF is at pts 24
[Parsed_fps_2 @ X] Dropping frame with pts 24
[Parsed_fps_2 @ X] 25 frames in, 24 frames out; 1 frames dropped, 0 frames duplicated.
After:
[auto_scale_0 @ X] [framesync @ X] Sync level 0
[Parsed_fps_2 @ X] EOF is at pts 25
[Parsed_fps_2 @ X] Writing frame with pts 24 to pts 24
[Parsed_fps_2 @ X] 25 frames in, 25 frames out; 0 frames dropped, 0 frames duplicated.
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-05-23 14:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-05-21 19:38 [FFmpeg-devel] [PATCH] avfilter/framesync: fix forward EOF pts Nicolas Gaullier
2024-05-23 14:39 ` Nicolas Gaullier
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git