From: "Chen, Wenbin" <wenbin.chen-at-intel.com@ffmpeg.org> To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> Subject: Re: [FFmpeg-devel] [PATCH] libavcodec/qsvenc: Flush cached frames before reset encoder Date: Mon, 13 Feb 2023 08:43:20 +0000 Message-ID: <IA1PR11MB6396C5C25CA078030B5C7982F8DD9@IA1PR11MB6396.namprd11.prod.outlook.com> (raw) In-Reply-To: <AS8P250MB07442A83B57C5304979C914B8FDD9@AS8P250MB0744.EURP250.PROD.OUTLOOK.COM> > wenbin.chen-at-intel.com@ffmpeg.org: > > From: Wenbin Chen <wenbin.chen@intel.com> > > > > According to https://github.com/Intel-Media- > SDK/MediaSDK/blob/master/doc/mediasdk-man.md#configuration-change. > > Before calling MFXVideoENCODE_Reset, The application needs to retrieve > > any cached frames in the SDK encoder. > > A loop is added before MFXVideoENCODE_Reset to retrieve cached frames > > and add them to async_fifo, so that dynamic configuration works when > > async_depth > 1. > > > > Signed-off-by: Wenbin Chen <wenbin.chen@intel.com> > > --- > > libavcodec/qsvenc.c | 118 +++++++++++++++++++++++--------------------- > > 1 file changed, 63 insertions(+), 55 deletions(-) > > > > diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c > > index 2f0e94a914..f3b488dec8 100644 > > --- a/libavcodec/qsvenc.c > > +++ b/libavcodec/qsvenc.c > > @@ -1600,7 +1600,7 @@ int ff_qsv_enc_init(AVCodecContext *avctx, > QSVEncContext *q) > > > > q->param.AsyncDepth = q->async_depth; > > > > - q->async_fifo = av_fifo_alloc2(q->async_depth, sizeof(QSVPacket), 0); > > + q->async_fifo = av_fifo_alloc2(q->async_depth, sizeof(QSVPacket), > AV_FIFO_FLAG_AUTO_GROW); > > If you use AV_FIFO_FLAG_AUTO_GROW, you need to handle av_fifo_write() > errors. Thanks. I will fix it in patch v2. > > > if (!q->async_fifo) > > return AVERROR(ENOMEM); > > > > @@ -2296,58 +2296,6 @@ static int > update_pic_timing_sei(AVCodecContext *avctx, QSVEncContext *q) > > return updated; > > } > > > > -static int update_parameters(AVCodecContext *avctx, QSVEncContext *q, > > - const AVFrame *frame) > > -{ > > - int needReset = 0, ret = 0; > > - > > - if (!frame || avctx->codec_id == AV_CODEC_ID_MJPEG) > > - return 0; > > - > > - needReset = update_qp(avctx, q); > > - needReset |= update_max_frame_size(avctx, q); > > - needReset |= update_gop_size(avctx, q); > > - needReset |= update_rir(avctx, q); > > - needReset |= update_low_delay_brc(avctx, q); > > - needReset |= update_frame_rate(avctx, q); > > - needReset |= update_bitrate(avctx, q); > > - needReset |= update_pic_timing_sei(avctx, q); > > - ret = update_min_max_qp(avctx, q); > > - if (ret < 0) > > - return ret; > > - needReset |= ret; > > - if (!needReset) > > - return 0; > > - > > - if (avctx->hwaccel_context) { > > - AVQSVContext *qsv = avctx->hwaccel_context; > > - int i, j; > > - q->param.ExtParam = q->extparam; > > - for (i = 0; i < qsv->nb_ext_buffers; i++) > > - q->param.ExtParam[i] = qsv->ext_buffers[i]; > > - q->param.NumExtParam = qsv->nb_ext_buffers; > > - > > - for (i = 0; i < q->nb_extparam_internal; i++) { > > - for (j = 0; j < qsv->nb_ext_buffers; j++) { > > - if (qsv->ext_buffers[j]->BufferId == q->extparam_internal[i]- > >BufferId) > > - break; > > - } > > - if (j < qsv->nb_ext_buffers) > > - continue; > > - q->param.ExtParam[q->param.NumExtParam++] = q- > >extparam_internal[i]; > > - } > > - } else { > > - q->param.ExtParam = q->extparam_internal; > > - q->param.NumExtParam = q->nb_extparam_internal; > > - } > > - av_log(avctx, AV_LOG_DEBUG, "Parameter change, call msdk reset.\n"); > > - ret = MFXVideoENCODE_Reset(q->session, &q->param); > > - if (ret < 0) > > - return ff_qsv_print_error(avctx, ret, "Error during resetting"); > > - > > - return 0; > > -} > > - > > static int encode_frame(AVCodecContext *avctx, QSVEncContext *q, > > const AVFrame *frame) > > { > > @@ -2438,7 +2386,7 @@ static int encode_frame(AVCodecContext *avctx, > QSVEncContext *q, > > > > if (ret < 0) { > > ret = (ret == MFX_ERR_MORE_DATA) ? > > - 0 : ff_qsv_print_error(avctx, ret, "Error during encoding"); > > + AVERROR(EAGAIN) : ff_qsv_print_error(avctx, ret, "Error during > encoding"); > > goto free; > > } > > > > @@ -2466,6 +2414,66 @@ nomem: > > goto free; > > } > > > > +static int update_parameters(AVCodecContext *avctx, QSVEncContext *q, > > + const AVFrame *frame) > > +{ > > + int needReset = 0, ret = 0; > > + > > + if (!frame || avctx->codec_id == AV_CODEC_ID_MJPEG) > > + return 0; > > + > > + needReset = update_qp(avctx, q); > > + needReset |= update_max_frame_size(avctx, q); > > + needReset |= update_gop_size(avctx, q); > > + needReset |= update_rir(avctx, q); > > + needReset |= update_low_delay_brc(avctx, q); > > + needReset |= update_frame_rate(avctx, q); > > + needReset |= update_bitrate(avctx, q); > > + needReset |= update_pic_timing_sei(avctx, q); > > + ret = update_min_max_qp(avctx, q); > > + if (ret < 0) > > + return ret; > > + needReset |= ret; > > + if (!needReset) > > + return 0; > > + > > + if (avctx->hwaccel_context) { > > + AVQSVContext *qsv = avctx->hwaccel_context; > > + int i, j; > > + q->param.ExtParam = q->extparam; > > + for (i = 0; i < qsv->nb_ext_buffers; i++) > > + q->param.ExtParam[i] = qsv->ext_buffers[i]; > > + q->param.NumExtParam = qsv->nb_ext_buffers; > > + > > + for (i = 0; i < q->nb_extparam_internal; i++) { > > + for (j = 0; j < qsv->nb_ext_buffers; j++) { > > + if (qsv->ext_buffers[j]->BufferId == q->extparam_internal[i]- > >BufferId) > > + break; > > + } > > + if (j < qsv->nb_ext_buffers) > > + continue; > > + q->param.ExtParam[q->param.NumExtParam++] = q- > >extparam_internal[i]; > > + } > > + } else { > > + q->param.ExtParam = q->extparam_internal; > > + q->param.NumExtParam = q->nb_extparam_internal; > > + } > > + > > + // Flush codec before reset configuration. > > + while (ret != AVERROR(EAGAIN)) { > > + ret = encode_frame(avctx, q, NULL); > > + if (ret < 0 && ret != AVERROR(EAGAIN)) > > + return ret; > > + } > > + > > + av_log(avctx, AV_LOG_DEBUG, "Parameter change, call msdk reset.\n"); > > + ret = MFXVideoENCODE_Reset(q->session, &q->param); > > + if (ret < 0) > > + return ff_qsv_print_error(avctx, ret, "Error during resetting"); > > + > > + return 0; > > +} > > + > > int ff_qsv_encode(AVCodecContext *avctx, QSVEncContext *q, > > AVPacket *pkt, const AVFrame *frame, int *got_packet) > > { > > @@ -2476,7 +2484,7 @@ int ff_qsv_encode(AVCodecContext *avctx, > QSVEncContext *q, > > return ret; > > > > ret = encode_frame(avctx, q, frame); > > - if (ret < 0) > > + if (ret < 0 && ret != AVERROR(EAGAIN)) > > return ret; > > > > if ((av_fifo_can_read(q->async_fifo) >= q->async_depth) || > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
prev parent reply other threads:[~2023-02-13 8:43 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-02-13 5:39 wenbin.chen-at-intel.com 2023-02-13 7:08 ` Andreas Rheinhardt 2023-02-13 8:43 ` Chen, Wenbin [this message]
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=IA1PR11MB6396C5C25CA078030B5C7982F8DD9@IA1PR11MB6396.namprd11.prod.outlook.com \ --to=wenbin.chen-at-intel.com@ffmpeg.org \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git