From: "Chen, Wenbin" <wenbin.chen-at-intel.com@ffmpeg.org>
To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org>
Subject: Re: [FFmpeg-devel] [PATCH 2/6] libavcodec/qsvenc: Add gop_size reset support to qsvenc
Date: Tue, 6 Sep 2022 08:44:18 +0000
Message-ID: <IA1PR11MB63964EA5DA33E34875FAB683F87E9@IA1PR11MB6396.namprd11.prod.outlook.com> (raw)
In-Reply-To: <673108d98279a661fef6743e09f5c476522fd14e.camel@intel.com>
> On Thu, 2022-08-18 at 14:59 +0800, Wenbin Chen wrote:
> > Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
> > ---
> > doc/encoders.texi | 3 +++
> > libavcodec/qsvenc.c | 18 +++++++++++++++++-
> > libavcodec/qsvenc.h | 2 ++
> > 3 files changed, 22 insertions(+), 1 deletion(-)
> >
> > diff --git a/doc/encoders.texi b/doc/encoders.texi
> > index 69fa46f3ea..9fb63856b1 100644
> > --- a/doc/encoders.texi
> > +++ b/doc/encoders.texi
> > @@ -3348,6 +3348,9 @@ Change these value to reset qsv codec's qp
> > configuration.
> > @item @var{max_frame_size}
> > Supported in h264_qsv and hevc_qsv.
> > Change this value to reset qsv codec's MaxFrameSize configuration.
> > +
> > +@item @var{gop_size}
> > +Change this value to reset qsv codec's gop configuration.
> > @end table
> >
> > @subsection H264 options
> > diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c
> > index c911b81e7d..b3820e4fe0 100644
> > --- a/libavcodec/qsvenc.c
> > +++ b/libavcodec/qsvenc.c
> > @@ -635,6 +635,7 @@ static int init_video_param(AVCodecContext *avctx,
> > QSVEncContext *q)
> > q->param.mfx.CodecProfile = q->profile;
> > q->param.mfx.TargetUsage = avctx->compression_level;
> > q->param.mfx.GopPicSize = FFMAX(0, avctx->gop_size);
> > + q->old_gop_size = avctx->gop_size;
> > q->param.mfx.GopRefDist = FFMAX(-1, avctx->max_b_frames) + 1;
> > q->param.mfx.GopOptFlag = avctx->flags &
> AV_CODEC_FLAG_CLOSED_GOP
> > ?
> > MFX_GOP_CLOSED : MFX_GOP_STRICT;
> > @@ -1692,16 +1693,31 @@ static int
> update_max_frame_size(AVCodecContext
> > *avctx, QSVEncContext *q)
> > return updated;
> > }
> >
> > +static int update_gop_size(AVCodecContext *avctx, QSVEncContext *q)
> > +{
> > + int updated = 0;
> > + UPDATE_PARAM(q->old_gop_size, avctx->gop_size);
> > + if (!updated)
> > + return 0;
> > +
> > + q->param.mfx.GopPicSize = FFMAX(0, avctx->gop_size);
> > + av_log(avctx, AV_LOG_DEBUG, "reset GopPicSize to %d\n",
> > + q->param.mfx.GopPicSize);
> > +
> > + return updated;
> > +}
> > +
> > static int update_parameters(AVCodecContext *avctx, QSVEncContext *q,
> > const AVFrame *frame)
> > {
> > int needReset = 0, ret = 0;
> >
> > - if (!frame)
> > + if (!frame || avctx->codec_id == AV_CODEC_ID_MJPEG)
> > return 0;
>
> Better to fix mjpeg_qsv in a separate patch if mjpeg_qsv is not able to
> resetany parameter.
>
> Thanks
> Haihao
Ok, I will update it in new patchset.
>
> >
> > needReset = update_qp(avctx, q);
> > needReset |= update_max_frame_size(avctx, q);
> > + needReset |= update_gop_size(avctx, q);
> > if (!needReset)
> > return 0;
> >
> > diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h
> > index c452c5b806..fdedae28dd 100644
> > --- a/libavcodec/qsvenc.h
> > +++ b/libavcodec/qsvenc.h
> > @@ -237,6 +237,8 @@ typedef struct QSVEncContext {
> > float old_b_quant_offset;
> > // This is used for max_frame_size reset
> > int old_max_frame_size;
> > + // This is used for gop reset
> > + int old_gop_size;
> > } QSVEncContext;
> >
> > int ff_qsv_enc_init(AVCodecContext *avctx, QSVEncContext *q);
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-09-06 8:44 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-18 6:59 [FFmpeg-devel] [PATCH 1/6] libavcodec/qsvenc: Add max_frame_size reset support to qsv Wenbin Chen
2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 2/6] libavcodec/qsvenc: Add gop_size reset support to qsvenc Wenbin Chen
2022-09-06 1:53 ` Xiang, Haihao
2022-09-06 8:44 ` Chen, Wenbin [this message]
2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 3/6] libavcodec/qsvenc: Add "slice" intra refresh type " Wenbin Chen
2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 4/6] libavcodec/qsvenc: Add intra refresh reset support " Wenbin Chen
2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 5/6] libavcodec/qsvenc: Add max/min qp reset support in qsvenc Wenbin Chen
2022-08-18 6:59 ` [FFmpeg-devel] [PATCH 6/6] libavcodec/qsvenc: Add low_delay_brc reset support to qsvenc Wenbin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=IA1PR11MB63964EA5DA33E34875FAB683F87E9@IA1PR11MB6396.namprd11.prod.outlook.com \
--to=wenbin.chen-at-intel.com@ffmpeg.org \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git