From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To: ffmpeg-devel@ffmpeg.org
Subject: Re: [FFmpeg-devel] [PATCH 22/26] lavc/fmtconvert: RISC-V V int32_to_float_fmul_scalar
Date: Tue, 20 Sep 2022 17:00:09 +0200
Message-ID: <GV1P250MB073785338631F056948ADE898F4C9@GV1P250MB0737.EURP250.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <20220920144013.4959-22-remi@remlab.net>
remi@remlab.net:
> From: Rémi Denis-Courmont <remi@remlab.net>
>
> ---
> libavcodec/fmtconvert.c | 2 ++
> libavcodec/fmtconvert.h | 1 +
> libavcodec/riscv/Makefile | 2 ++
> libavcodec/riscv/fmtconvert_init.c | 41 ++++++++++++++++++++++++++++++
> libavcodec/riscv/fmtconvert_rvv.S | 40 +++++++++++++++++++++++++++++
> 5 files changed, 86 insertions(+)
> create mode 100644 libavcodec/riscv/fmtconvert_init.c
> create mode 100644 libavcodec/riscv/fmtconvert_rvv.S
>
> diff --git a/libavcodec/fmtconvert.c b/libavcodec/fmtconvert.c
> index 00f55f8f1e..8dcef82ee3 100644
> --- a/libavcodec/fmtconvert.c
> +++ b/libavcodec/fmtconvert.c
> @@ -53,6 +53,8 @@ av_cold void ff_fmt_convert_init(FmtConvertContext *c, AVCodecContext *avctx)
> ff_fmt_convert_init_arm(c, avctx);
> #elif ARCH_PPC
> ff_fmt_convert_init_ppc(c, avctx);
> +#elif ARCH_RISCV
> + ff_fmt_convert_init_riscv(c, avctx);
> #elif ARCH_X86
> ff_fmt_convert_init_x86(c, avctx);
> #endif
> diff --git a/libavcodec/fmtconvert.h b/libavcodec/fmtconvert.h
> index b2df7a9629..ca51d0861a 100644
> --- a/libavcodec/fmtconvert.h
> +++ b/libavcodec/fmtconvert.h
> @@ -61,6 +61,7 @@ void ff_fmt_convert_init(FmtConvertContext *c, AVCodecContext *avctx);
> void ff_fmt_convert_init_aarch64(FmtConvertContext *c, AVCodecContext *avctx);
> void ff_fmt_convert_init_arm(FmtConvertContext *c, AVCodecContext *avctx);
> void ff_fmt_convert_init_ppc(FmtConvertContext *c, AVCodecContext *avctx);
> +void ff_fmt_convert_init_riscv(FmtConvertContext *c, AVCodecContext *avctx);
> void ff_fmt_convert_init_x86(FmtConvertContext *c, AVCodecContext *avctx);
> void ff_fmt_convert_init_mips(FmtConvertContext *c);
>
> diff --git a/libavcodec/riscv/Makefile b/libavcodec/riscv/Makefile
> index 99541b075e..682174e875 100644
> --- a/libavcodec/riscv/Makefile
> +++ b/libavcodec/riscv/Makefile
> @@ -1,5 +1,7 @@
> OBJS-$(CONFIG_AUDIODSP) += riscv/audiodsp_init.o \
> riscv/audiodsp_rvf.o
> RVV-OBJS-$(CONFIG_AUDIODSP) += riscv/audiodsp_rvv.o
> +OBJS-$(CONFIG_FMTCONVERT) += riscv/fmtconvert_init.o
> +RVV-OBJS-$(CONFIG_FMTCONVERT) += riscv/fmtconvert_rvv.o
> OBJS-$(CONFIG_PIXBLOCKDSP) += riscv/pixblockdsp_init.o \
> riscv/pixblockdsp_rvi.o
> diff --git a/libavcodec/riscv/fmtconvert_init.c b/libavcodec/riscv/fmtconvert_init.c
> new file mode 100644
> index 0000000000..aa7d44ff5a
> --- /dev/null
> +++ b/libavcodec/riscv/fmtconvert_init.c
> @@ -0,0 +1,41 @@
> +/*
> + * Copyright © 2022 Rémi Denis-Courmont.
> + *
> + * This file is part of FFmpeg.
> + *
> + * FFmpeg is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * FFmpeg is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with FFmpeg; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +
> +#include <stdint.h>
> +
> +#include "config.h"
> +#include "libavutil/attributes.h"
> +#include "libavutil/cpu.h"
> +#include "libavcodec/avcodec.h"
> +#include "libavcodec/fmtconvert.h"
> +
> +void ff_int32_to_float_fmul_scalar_rvv(float *dst, const int32_t *src,
> + float mul, int len);
> +
> +av_cold void ff_fmt_convert_init_riscv(FmtConvertContext *c,
> + AVCodecContext *avctx)
> +{
> +#ifdef HAVE_RVV
> + int flags = av_get_cpu_flags();
> +
> + if (flags & AV_CPU_FLAG_RV_ZVE32F)
> + c->int32_to_float_fmul_scalar = ff_int32_to_float_fmul_scalar_rvv;
If you added {} in this patch, you would not need to rewrite the if-line
in the next patch.
> +#endif
> +}
> diff --git a/libavcodec/riscv/fmtconvert_rvv.S b/libavcodec/riscv/fmtconvert_rvv.S
> new file mode 100644
> index 0000000000..c19b77e38a
> --- /dev/null
> +++ b/libavcodec/riscv/fmtconvert_rvv.S
> @@ -0,0 +1,40 @@
> +/*
> + * Copyright © 2022 Rémi Denis-Courmont.
> + *
> + * This file is part of FFmpeg.
> + *
> + * FFmpeg is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * FFmpeg is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with FFmpeg; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +
> +#include "config.h"
> +#include "../libavutil/riscv/asm.S"
> +
> +func ff_int32_to_float_fmul_scalar_rvv, zve32f
> +NOHWF fmv.w.x fa0, a2
> +NOHWF mv a2, a3
> +1:
> + vsetvli t0, a2, e32, m1, ta, ma
> + vle32.v v24, (a1)
> + slli t1, t0, 2
> + vfcvt.f.x.v v24, v24
> + sub a2, a2, t0
> + vfmul.vf v24, v24, fa0
> + add a1, a1, t1
> + vse32.v v24, (a0)
> + add a0, a0, t1
> + bnez a2, 1b
> +
> + ret
> +endfunc
Notice that there will be a slight conflict with
https://ffmpeg.org/pipermail/ffmpeg-devel/2022-September/301710.html;
but it is trivial to fix. Just don't forget to remove the avcodec.h
inclusion.
- Andreas
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-09-20 15:00 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-20 14:39 [FFmpeg-devel] [PATCHv3 00/26] RISC-V CPU extensions Rémi Denis-Courmont
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 01/26] lavu/cpu: detect RISC-V base extensions remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 02/26] lavu/riscv: initial common header for assembler macros remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 03/26] lavc/audiodsp: RISC-V F vector_clipf remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 04/26] lavc/pixblockdsp: RISC-V I get_pixels remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 05/26] lavu/cpu: CPU flags for the RISC-V Vector extension remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 06/26] configure: probe " remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 07/26] lavu/floatdsp: RISC-V V vector_fmul_scalar remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 08/26] lavu/floatdsp: RISC-V V vector_dmul_scalar remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 09/26] lavu/floatdsp: RISC-V V vector_fmul remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 10/26] lavu/floatdsp: RISC-V V vector_dmul remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 11/26] lavu/floatdsp: RISC-V V vector_fmac_scalar remi
2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 12/26] lavu/floatdsp: RISC-V V vector_dmac_scalar remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 13/26] lavu/floatdsp: RISC-V V vector_fmul_add remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 14/26] lavu/floatdsp: RISC-V V butterflies_float remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 15/26] lavu/floatdsp: RISC-V V vector_fmul_reversed remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 16/26] lavu/floatdsp: RISC-V V vector_fmul_window remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 17/26] lavu/floatdsp: RISC-V V scalarproduct_float remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 18/26] lavu/fixeddsp: RISC-V V butterflies_fixed remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 19/26] lavc/audiodsp: RISC-V V vector_clip_int32 remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 20/26] lavc/audiodsp: RISC-V V vector_clipf remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 21/26] lavc/audiodsp: RISC-V V scalarproduct_int16 remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 22/26] lavc/fmtconvert: RISC-V V int32_to_float_fmul_scalar remi
2022-09-20 15:00 ` Andreas Rheinhardt [this message]
2022-09-20 15:12 ` Rémi Denis-Courmont
2022-09-21 14:14 ` [FFmpeg-devel] [PATCH 22 bis/26] " remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 23/26] lavc/fmtconvert: RISC-V V int32_to_float_fmul_array8 remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 24/26] lavc/vorbisdsp: RISC-V V inverse_coupling remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 25/26] lavc/aacpsdsp: RISC-V V add_squares remi
2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 26/26] lavc/aacpsdsp: RISC-V V mul_pair_single remi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=GV1P250MB073785338631F056948ADE898F4C9@GV1P250MB0737.EURP250.PROD.OUTLOOK.COM \
--to=andreas.rheinhardt@outlook.com \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git