From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com> To: ffmpeg-devel@ffmpeg.org Subject: Re: [FFmpeg-devel] [PATCH 2/2] lavc/qsvenc_av1: accept HDR metadata if have Date: Tue, 21 May 2024 08:35:45 +0200 Message-ID: <GV1P250MB07373BCBD71C21E11FD72FE38FEA2@GV1P250MB0737.EURP250.PROD.OUTLOOK.COM> (raw) In-Reply-To: <20240521053948.1516155-2-haihao.xiang@intel.com> Xiang, Haihao: > From: Haihao Xiang <haihao.xiang@intel.com> > > The sdk av1 encoder can accept HDR metadata via mfxEncodeCtrl::ExtParam. > > Signed-off-by: Haihao Xiang <haihao.xiang@intel.com> > --- > libavcodec/qsvenc_av1.c | 75 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 75 insertions(+) > > diff --git a/libavcodec/qsvenc_av1.c b/libavcodec/qsvenc_av1.c > index 33727bb07e..a7d35d7bef 100644 > --- a/libavcodec/qsvenc_av1.c > +++ b/libavcodec/qsvenc_av1.c > @@ -26,6 +26,8 @@ > > #include "libavutil/common.h" > #include "libavutil/opt.h" > +#include "libavutil/mem.h" > +#include "libavutil/mastering_display_metadata.h" Breaks alphabetical ordering > > #include "avcodec.h" > #include "codec_internal.h" > @@ -39,6 +41,77 @@ typedef struct QSVAV1EncContext { > QSVEncContext qsv; > } QSVAV1EncContext; > > +static int qsv_av1_set_encode_ctrl(AVCodecContext *avctx, > + const AVFrame *frame, mfxEncodeCtrl *enc_ctrl) > +{ > + QSVAV1EncContext *q = avctx->priv_data; > + AVFrameSideData *sd; > + > + if (!frame || !QSV_RUNTIME_VERSION_ATLEAST(q->qsv.ver, 2, 11)) > + return 0; > + > + sd = av_frame_get_side_data(frame, AV_FRAME_DATA_MASTERING_DISPLAY_METADATA); > + if (sd) { > + AVMasteringDisplayMetadata *mdm = (AVMasteringDisplayMetadata *)sd->data; > + > + if (mdm->has_primaries && mdm->has_luminance) { > + const int chroma_den = 1 << 16; > + const int max_luma_den = 1 << 8; > + const int min_luma_den = 1 << 14; > + int i; Should have loop-scope > + mfxExtMasteringDisplayColourVolume *mdcv = av_mallocz(sizeof(mfxExtMasteringDisplayColourVolume)); > + if (!mdcv) > + return AVERROR(ENOMEM); > + > + mdcv->Header.BufferId = MFX_EXTBUFF_MASTERING_DISPLAY_COLOUR_VOLUME; > + mdcv->Header.BufferSz = sizeof(*mdcv); > + > + for (i = 0; i < 3; i++) { > + mdcv->DisplayPrimariesX[i] = > + av_rescale(mdm->display_primaries[i][0].num, chroma_den, > + mdm->display_primaries[i][0].den); > + mdcv->DisplayPrimariesY[i] = > + av_rescale(mdm->display_primaries[i][1].num, chroma_den, > + mdm->display_primaries[i][1].den); > + } > + > + mdcv->WhitePointX = > + av_rescale(mdm->white_point[0].num, chroma_den, > + mdm->white_point[0].den); > + mdcv->WhitePointY = > + av_rescale(mdm->white_point[1].num, chroma_den, > + mdm->white_point[1].den); > + > + mdcv->MaxDisplayMasteringLuminance = > + av_rescale(mdm->max_luminance.num, max_luma_den, > + mdm->max_luminance.den); > + mdcv->MinDisplayMasteringLuminance = > + av_rescale(mdm->min_luminance.num, min_luma_den, > + mdm->min_luminance.den); > + > + enc_ctrl->ExtParam[enc_ctrl->NumExtParam++] = (mfxExtBuffer *)mdcv; > + } > + } > + > + sd = av_frame_get_side_data(frame, AV_FRAME_DATA_CONTENT_LIGHT_LEVEL); > + if (sd) { > + AVContentLightMetadata *clm = (AVContentLightMetadata *)sd->data; > + mfxExtContentLightLevelInfo * clli = av_mallocz(sizeof(mfxExtContentLightLevelInfo)); sizeof(*clli) But actually, both allocations seem to be unnecessary: This callback is only called when there is a QSVFrame and it already contains a mfxExtContentLightLevelInfo and mfxExtMasteringDisplayColourVolume (used by the decoder), so why not simply reuse that? The type of set_encode_ctrl_cb would need to be changed of course. (Btw: The relevant QSVFrame fields are under "#if QSV_VERSION_ATLEAST(1, 35)", yet this patch does not use any such #if. Why?) > + if (!clli) > + return AVERROR(ENOMEM); > + > + clli->Header.BufferId = MFX_EXTBUFF_CONTENT_LIGHT_LEVEL_INFO; > + clli->Header.BufferSz = sizeof(*clli); > + > + clli->MaxContentLightLevel = clm->MaxCLL; > + clli->MaxPicAverageLightLevel = clm->MaxFALL; > + > + enc_ctrl->ExtParam[enc_ctrl->NumExtParam++] = (mfxExtBuffer *)clli; > + } > + > + return 0; > +} > + > static av_cold int qsv_enc_init(AVCodecContext *avctx) > { > QSVAV1EncContext *q = avctx->priv_data; > @@ -61,6 +134,8 @@ static av_cold int qsv_enc_init(AVCodecContext *avctx) > return ret; > } > > + q->qsv.set_encode_ctrl_cb = qsv_av1_set_encode_ctrl; > + > return ff_qsv_enc_init(avctx, &q->qsv); > } > _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2024-05-21 6:35 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-05-21 5:39 [FFmpeg-devel] [PATCH 1/2] lavc/qsvdec: update HDR side data on output AVFrame for AV1 decoding Xiang, Haihao 2024-05-21 5:39 ` [FFmpeg-devel] [PATCH 2/2] lavc/qsvenc_av1: accept HDR metadata if have Xiang, Haihao 2024-05-21 6:35 ` Andreas Rheinhardt [this message] 2024-05-21 6:39 ` Andreas Rheinhardt 2024-05-21 6:57 ` Andreas Rheinhardt 2024-05-21 7:22 ` Xiang, Haihao 2024-05-21 6:14 ` [FFmpeg-devel] [PATCH 1/2] lavc/qsvdec: update HDR side data on output AVFrame for AV1 decoding Andreas Rheinhardt 2024-05-22 4:15 Xiang, Haihao 2024-05-22 4:16 ` [FFmpeg-devel] [PATCH 2/2] lavc/qsvenc_av1: accept HDR metadata if have Xiang, Haihao
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=GV1P250MB07373BCBD71C21E11FD72FE38FEA2@GV1P250MB0737.EURP250.PROD.OUTLOOK.COM \ --to=andreas.rheinhardt@outlook.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git