From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To: ffmpeg-devel@ffmpeg.org
Subject: Re: [FFmpeg-devel] [PATCH 2/3] avcodec/dct: Move fdct function declarations to fdctdsp.h
Date: Sat, 29 Jul 2023 02:25:51 +0200
Message-ID: <GV1P250MB07373190824D2FC60E3434778F07A@GV1P250MB0737.EURP250.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <AS8P250MB07447B8D0002D09138B153E68F02A@AS8P250MB0744.EURP250.PROD.OUTLOOK.COM>
Andreas Rheinhardt:
> It is the more proper place for them given that this is
> the only API using them.
>
> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
> ---
> libavcodec/asvenc.c | 1 -
> libavcodec/dct.h | 7 -------
> libavcodec/fdctdsp.c | 1 -
> libavcodec/fdctdsp.h | 7 +++++++
> libavcodec/jfdctfst.c | 2 +-
> libavcodec/jfdctint_template.c | 2 +-
> libavcodec/mpegvideo_enc.c | 1 -
> libavcodec/tests/dct.c | 1 +
> 8 files changed, 10 insertions(+), 12 deletions(-)
>
> diff --git a/libavcodec/asvenc.c b/libavcodec/asvenc.c
> index 4a14bcf8fa..50da46738c 100644
> --- a/libavcodec/asvenc.c
> +++ b/libavcodec/asvenc.c
> @@ -33,7 +33,6 @@
> #include "asv.h"
> #include "avcodec.h"
> #include "codec_internal.h"
> -#include "dct.h"
> #include "encode.h"
> #include "fdctdsp.h"
> #include "mpeg12data.h"
> diff --git a/libavcodec/dct.h b/libavcodec/dct.h
> index 041e8169ce..05bff51580 100644
> --- a/libavcodec/dct.h
> +++ b/libavcodec/dct.h
> @@ -52,13 +52,6 @@ void ff_dct_end (DCTContext *s);
>
> void ff_dct_init_x86(DCTContext *s);
>
> -void ff_fdct_ifast(int16_t *data);
> -void ff_fdct_ifast248(int16_t *data);
> -void ff_jpeg_fdct_islow_8(int16_t *data);
> -void ff_jpeg_fdct_islow_10(int16_t *data);
> -void ff_fdct248_islow_8(int16_t *data);
> -void ff_fdct248_islow_10(int16_t *data);
> -
> void ff_j_rev_dct(int16_t *data);
> void ff_j_rev_dct4(int16_t *data);
> void ff_j_rev_dct2(int16_t *data);
> diff --git a/libavcodec/fdctdsp.c b/libavcodec/fdctdsp.c
> index 5306c9d047..f8ba17426c 100644
> --- a/libavcodec/fdctdsp.c
> +++ b/libavcodec/fdctdsp.c
> @@ -18,7 +18,6 @@
>
> #include "libavutil/attributes.h"
> #include "avcodec.h"
> -#include "dct.h"
> #include "faandct.h"
> #include "fdctdsp.h"
> #include "config.h"
> diff --git a/libavcodec/fdctdsp.h b/libavcodec/fdctdsp.h
> index 3e1f683b9e..82edf8b3bb 100644
> --- a/libavcodec/fdctdsp.h
> +++ b/libavcodec/fdctdsp.h
> @@ -34,4 +34,11 @@ void ff_fdctdsp_init_ppc(FDCTDSPContext *c, AVCodecContext *avctx,
> void ff_fdctdsp_init_x86(FDCTDSPContext *c, AVCodecContext *avctx,
> unsigned high_bit_depth);
>
> +void ff_fdct_ifast(int16_t *data);
> +void ff_fdct_ifast248(int16_t *data);
> +void ff_jpeg_fdct_islow_8(int16_t *data);
> +void ff_jpeg_fdct_islow_10(int16_t *data);
> +void ff_fdct248_islow_8(int16_t *data);
> +void ff_fdct248_islow_10(int16_t *data);
> +
> #endif /* AVCODEC_FDCTDSP_H */
> diff --git a/libavcodec/jfdctfst.c b/libavcodec/jfdctfst.c
> index 805e05808c..946b12f379 100644
> --- a/libavcodec/jfdctfst.c
> +++ b/libavcodec/jfdctfst.c
> @@ -68,7 +68,7 @@
>
> #include <stdint.h>
> #include "libavutil/attributes.h"
> -#include "dct.h"
> +#include "fdctdsp.h"
>
> #define DCTSIZE 8
> #define GLOBAL(x) x
> diff --git a/libavcodec/jfdctint_template.c b/libavcodec/jfdctint_template.c
> index 67fb77b5e1..ca17300c32 100644
> --- a/libavcodec/jfdctint_template.c
> +++ b/libavcodec/jfdctint_template.c
> @@ -60,7 +60,7 @@
> */
>
> #include "libavutil/common.h"
> -#include "dct.h"
> +#include "fdctdsp.h"
>
> #include "bit_depth_template.c"
>
> diff --git a/libavcodec/mpegvideo_enc.c b/libavcodec/mpegvideo_enc.c
> index 9bdf5dbe07..64e66ae958 100644
> --- a/libavcodec/mpegvideo_enc.c
> +++ b/libavcodec/mpegvideo_enc.c
> @@ -43,7 +43,6 @@
> #include "libavutil/opt.h"
> #include "libavutil/thread.h"
> #include "avcodec.h"
> -#include "dct.h"
> #include "encode.h"
> #include "idctdsp.h"
> #include "mpeg12codecs.h"
> diff --git a/libavcodec/tests/dct.c b/libavcodec/tests/dct.c
> index c847af2f11..e8d0b8dd1d 100644
> --- a/libavcodec/tests/dct.c
> +++ b/libavcodec/tests/dct.c
> @@ -43,6 +43,7 @@
> #include "libavutil/time.h"
>
> #include "libavcodec/dct.h"
> +#include "libavcodec/fdctdsp.h"
> #include "libavcodec/idctdsp.h"
> #include "libavcodec/simple_idct.h"
> #include "libavcodec/xvididct.h"
Will apply the last two patches of this patchset (with the small change
to use a forward declaration for AVCodecContext in fdctdsp.h to avoid
including avcodec.h unnecessarily -- it would incur an unnecessary
dependency on avcodec.h for e.g. jfdctfst.c).
- Andreas
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2023-07-29 0:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-24 11:59 [FFmpeg-devel] [PATCH] avcodec/(fft|mdct)_fixed_32: Remove fixed-point FFT/MDCT Andreas Rheinhardt
2023-07-24 13:17 ` [FFmpeg-devel] [PATCH 2/3] avcodec/dct: Move fdct function declarations to fdctdsp.h Andreas Rheinhardt
2023-07-29 0:25 ` Andreas Rheinhardt [this message]
2023-07-24 13:17 ` [FFmpeg-devel] [PATCH 3/3] avcodec/fdctdsp: Mark functions as hidden Andreas Rheinhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=GV1P250MB07373190824D2FC60E3434778F07A@GV1P250MB0737.EURP250.PROD.OUTLOOK.COM \
--to=andreas.rheinhardt@outlook.com \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git