Re: [FFmpeg-devel] [PATCH] lavc/qsvenc_h264: don't support P010 format

[Soft Works <softworkz@hotmail.com>]

> -----Original Message-----
> From: ffmpeg-devel <ffmpeg-devel-bounces@ffmpeg.org> On Behalf Of
> James Almer
> Sent: Saturday, November 26, 2022 2:01 AM
> To: ffmpeg-devel@ffmpeg.org
> Subject: Re: [FFmpeg-devel] [PATCH] lavc/qsvenc_h264: don't support
> P010 format
> 
> On 11/25/2022 9:58 PM, Soft Works wrote:
> >
> >
> >> -----Original Message-----
> >> From: ffmpeg-devel <ffmpeg-devel-bounces@ffmpeg.org> On Behalf Of
> >> James Almer
> >> Sent: Saturday, November 26, 2022 12:58 AM
> >> To: ffmpeg-devel@ffmpeg.org
> >> Subject: Re: [FFmpeg-devel] [PATCH] lavc/qsvenc_h264: don't
> support
> >> P010 format
> >>
> >> On 11/25/2022 8:51 PM, Soft Works wrote:
> >>>
> >>>
> >>>> -----Original Message-----
> >>>> From: ffmpeg-devel <ffmpeg-devel-bounces@ffmpeg.org> On Behalf
> Of
> >>>> James Almer
> >>>> Sent: Saturday, November 26, 2022 12:35 AM
> >>>> To: ffmpeg-devel@ffmpeg.org
> >>>> Subject: Re: [FFmpeg-devel] [PATCH] lavc/qsvenc_h264: don't
> >> support
> >>>> P010 format
> >>>>
> >>>> On 11/25/2022 8:26 PM, Dong, Ruijing wrote:
> >>>>> [AMD Official Use Only - General]
> >>>>>
> >>>>> Will it make sense to accept P010 input, however encode to h264
> >>>> 8bit?
> >>>>
> >>>> If it works (the encoder accepts the 10 bit input even if it
> >> encodes
> >>>> it
> >>>> as 8bit), then i don't see why not. I assume it would also be
> >> faster
> >>>> than using swscale to convert said 10bit input to nv12 before
> >> passing
> >>>> that to the encoder.
> >>>>
> >>>> Removing support for a pixel format as input in an encoder needs
> a
> >>>> reason other than "It's rarely used", more so when it's a single
> >>>> line.
> >>>> It either needs to not work, or somehow get in the way of
> further
> >>>> improvements.
> >>>
> >>> Oh sorry, I noticed that there was a misunderstanding.
> >>>
> >>> When I said "It's rarely used", I didn't mean that as a
> >> justification
> >>> for the removal, it was meant as an explanation why none of the
> >>> hwaccels has implemented it.
> >>>
> >>> softworkz
> >>
> >> Alright, then i'll repeat my question: Does it work?
> >
> > No.
> 
> What does this encoder currently do when you feed it p010 input? What
> does it output?

An error:


1. 10bit from HW context:


[graph 0 video input from stream 0:0 @ 000001dc301aeec0] w:3840 h:2160 pixfmt:yuv420p10le tb:1/60000 fr:60000/1001 sar:1/1
[auto_scale_0 @ 000001dc2362a700] w:iw h:ih flags:'' interl:0
[hwupload@f1 @ 000001dc2944ef00] auto-inserting filter 'auto_scale_0' between the filter 'graph 0 video input from stream 0:0' and the filter 'hwupload@f1'
[auto_scale_0 @ 000001dc2362a700] w:3840 h:2160 fmt:yuv420p10le sar:1/1 -> w:3840 h:2160 fmt:p010le sar:1/1 flags:0x0
[AVHWDeviceContext @ 000001dc444f9a00] D3D11 Init
[AVHWDeviceContext @ 000001dc444fab80] D3D11 Init
[vpp_qsv@f2 @ 000001dc22a3d880] VPP: input is video memory surface
[vpp_qsv@f2 @ 000001dc22a3d880] VPP: output is video memory surface
[auto_scale_0 @ 000001dc2362a700] w:3840 h:2160 fmt:yuv420p10le sar:1/1 -> w:3840 h:2160 fmt:p010le sar:1/1 flags:0x0
    Last message repeated 2 times
[h264_qsv @ 000001dc161b6040] Using input frames context (format qsv) with h264_qsv encoder.
[h264_qsv @ 000001dc161b6040] Encoder: input is video memory surface
[h264_qsv @ 000001dc161b6040] Using the average variable bitrate (AVBR) ratecontrol method
[h264_qsv @ 000001dc161b6040] Current pixel format is unsupported
[h264_qsv @ 000001dc161b6040] some encoding parameters are not supported by the QSV runtime. Please double check the input parameters.
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[AVHWDeviceContext @ 000001dc444f9a00] D3D11 Uninit
[AVIOContext @ 000001dc16197c80] Statistics: 0 bytes written, 0 seeks, 0 writeouts
[AVHWDeviceContext @ 000001dc444fab80] D3D11 Uninit
[AVIOContext @ 000001dc161839c0] Statistics: 131146 bytes read, 2 seeks
Conversion failed!


2. 10bit from SW context:


[graph 0 video input from stream 0:0 @ 0000019e915dee00] w:3840 h:2160 pixfmt:yuv420p10le tb:1/60000 fr:60000/1001 sar:1/1
[auto_scale_0 @ 0000019ee99936c0] w:iw h:ih flags:'' interl:0
[format @ 0000019ee9993240] auto-inserting filter 'auto_scale_0' between the filter 'Parsed_null_0' and the filter 'format'
[auto_scale_0 @ 0000019ee99936c0] w:3840 h:2160 fmt:yuv420p10le sar:1/1 -> w:3840 h:2160 fmt:p010le sar:1/1 flags:0x0
    Last message repeated 3 times
[h264_qsv @ 0000019ee9995dc0] Using device qd1 (type qsv) with h264_qsv encoder.
[h264_qsv @ 0000019ee9995dc0] Encoder: input is system memory surface
[h264_qsv @ 0000019ee9995dc0] Using the average variable bitrate (AVBR) ratecontrol method
[h264_qsv @ 0000019ee9995dc0] Current pixel format is unsupported
[h264_qsv @ 0000019ee9995dc0] some encoding parameters are not supported by the QSV runtime. Please double check the input parameters.
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
[AVIOContext @ 0000019ef62b4000] Statistics: 0 bytes written, 0 seeks, 0 writeouts
[AVIOContext @ 0000019ee995abc0] Statistics: 131146 bytes read, 2 seeks
Conversion failed!

softworkz
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".