From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com> To: ffmpeg-devel@ffmpeg.org Subject: Re: [FFmpeg-devel] [PATCH v7 1/2] avformat: refactor ff_stream_encode_params_copy() to stream_params_copy() Date: Mon, 8 Aug 2022 16:48:17 +0200 Message-ID: <DB6PR0101MB22148A2F9DC1900656FA0C968F639@DB6PR0101MB2214.eurprd01.prod.exchangelabs.com> (raw) In-Reply-To: <20220806233520.1154-1-pal@sandflow.com> pal@sandflow.com: > From: Pierre-Anthony Lemieux <pal@palemieux.com> > > Addresses http://ffmpeg.org/pipermail/ffmpeg-devel/2022-August/299726.html > > --- > libavformat/avformat.c | 66 ++++++++++++++++++++++++++++++++++++++++ > libavformat/fifo.c | 8 ++--- > libavformat/internal.h | 11 +++++++ > libavformat/mux.h | 9 ------ > libavformat/mux_utils.c | 28 ----------------- > libavformat/segment.c | 6 ++-- > libavformat/tee.c | 7 ++--- > libavformat/webm_chunk.c | 6 ++-- > 8 files changed, 86 insertions(+), 55 deletions(-) > > diff --git a/libavformat/avformat.c b/libavformat/avformat.c > index 30d6ea6a49..19c7219471 100644 > --- a/libavformat/avformat.c > +++ b/libavformat/avformat.c > @@ -235,6 +235,72 @@ int ff_stream_side_data_copy(AVStream *dst, const AVStream *src) > return 0; > } > > +/** > + * Copy all stream parameters from source to destination stream, with the > + * exception of the index field, which is usually set by avformat_new_stream(). > + * > + * @param dst pointer to destination AVStream > + * @param src pointer to source AVStream > + * @return >=0 on success, AVERROR code on error > + */ > +static int stream_params_copy(AVStream *dst, const AVStream *src) > +{ > + int ret; > + > + dst->id = src->id; > + dst->time_base = src->time_base; > + dst->start_time = src->start_time; > + dst->duration = src->duration; > + dst->nb_frames = src->nb_frames; > + dst->disposition = src->disposition; > + dst->discard = src->discard; > + dst->sample_aspect_ratio = src->sample_aspect_ratio; > + dst->avg_frame_rate = src->avg_frame_rate; > + dst->event_flags = src->event_flags; > + dst->r_frame_rate = src->r_frame_rate; > + dst->pts_wrap_bits = src->pts_wrap_bits; > + > + av_dict_free(&dst->metadata); > + ret = av_dict_copy(&dst->metadata, src->metadata, 0); > + if (ret < 0) > + return ret; > + > + ret = avcodec_parameters_copy(dst->codecpar, src->codecpar); > + if (ret < 0) > + return ret; > + > + ret = ff_stream_side_data_copy(dst, src); > + if (ret < 0) > + return ret; > + > + av_packet_unref(&dst->attached_pic); > + if (src->attached_pic.data) { > + ret = av_packet_ref(&dst->attached_pic, &src->attached_pic); > + if (ret < 0) > + return ret; > + } > + > + return 0; > +} > + > +AVStream *ff_stream_clone(AVFormatContext *dst_ctx, const AVStream *src) > +{ > + AVStream *st; > + int ret; > + > + st = avformat_new_stream(dst_ctx, NULL); > + if (!st) > + return NULL; > + > + ret = stream_params_copy(st, src); > + if (ret < 0) { > + ff_remove_stream(dst_ctx, st); > + return NULL; > + } > + > + return st; > +} > + > AVProgram *av_new_program(AVFormatContext *ac, int id) > { > AVProgram *program = NULL; > diff --git a/libavformat/fifo.c b/libavformat/fifo.c > index ead2bdc5cf..55d413b952 100644 > --- a/libavformat/fifo.c > +++ b/libavformat/fifo.c > @@ -505,13 +505,11 @@ static int fifo_mux_init(AVFormatContext *avf, const AVOutputFormat *oformat, > avf2->flags = avf->flags; > > for (i = 0; i < avf->nb_streams; ++i) { > - AVStream *st = avformat_new_stream(avf2, NULL); > + AVStream *st = NULL; > + > + st = ff_stream_clone(avf2, avf->streams[i]); I don't know why you stopped initializing st directly with its eventual value (if I see this corrently, the line wouldn't be overlong). I can fix this upon commit if you allow. Anyway, I will apply this in two days unless there are any comments from anyone else. > if (!st) > return AVERROR(ENOMEM); > - > - ret = ff_stream_encode_params_copy(st, avf->streams[i]); > - if (ret < 0) > - return ret; > } > > return 0; > diff --git a/libavformat/internal.h b/libavformat/internal.h > index b6b8fbf56f..9b07cfb271 100644 > --- a/libavformat/internal.h > +++ b/libavformat/internal.h > @@ -625,6 +625,17 @@ enum AVCodecID ff_get_pcm_codec_id(int bps, int flt, int be, int sflags); > */ > int ff_stream_side_data_copy(AVStream *dst, const AVStream *src); > > +/** > + * Create a new stream and copy to it all parameters from a source stream, with > + * the exception of the index field, which is set when the new stream is > + * created. > + * > + * @param dst_ctx pointer to the context in which the new stream is created > + * @param src pointer to source AVStream > + * @return pointer to the new stream or NULL on error > + */ > +AVStream *ff_stream_clone(AVFormatContext *dst_ctx, const AVStream *src); > + > /** > * Wrap ffurl_move() and log if error happens. > * > diff --git a/libavformat/mux.h b/libavformat/mux.h > index c01da82194..1bfcaf795f 100644 > --- a/libavformat/mux.h > +++ b/libavformat/mux.h > @@ -113,15 +113,6 @@ int ff_format_shift_data(AVFormatContext *s, int64_t read_start, int shift_size) > */ > int ff_format_output_open(AVFormatContext *s, const char *url, AVDictionary **options); > > -/** > - * Copy encoding parameters from source to destination stream > - * > - * @param dst pointer to destination AVStream > - * @param src pointer to source AVStream > - * @return >=0 on success, AVERROR code on error > - */ > -int ff_stream_encode_params_copy(AVStream *dst, const AVStream *src); > - > /** > * Parse creation_time in AVFormatContext metadata if exists and warn if the > * parsing fails. > diff --git a/libavformat/mux_utils.c b/libavformat/mux_utils.c > index eb8ea3d560..2fa2ab5b0f 100644 > --- a/libavformat/mux_utils.c > +++ b/libavformat/mux_utils.c > @@ -121,34 +121,6 @@ int ff_format_output_open(AVFormatContext *s, const char *url, AVDictionary **op > return 0; > } > > -int ff_stream_encode_params_copy(AVStream *dst, const AVStream *src) > -{ > - int ret; > - > - dst->id = src->id; > - dst->time_base = src->time_base; > - dst->nb_frames = src->nb_frames; > - dst->disposition = src->disposition; > - dst->sample_aspect_ratio = src->sample_aspect_ratio; > - dst->avg_frame_rate = src->avg_frame_rate; > - dst->r_frame_rate = src->r_frame_rate; > - > - av_dict_free(&dst->metadata); > - ret = av_dict_copy(&dst->metadata, src->metadata, 0); > - if (ret < 0) > - return ret; > - > - ret = avcodec_parameters_copy(dst->codecpar, src->codecpar); > - if (ret < 0) > - return ret; > - > - ret = ff_stream_side_data_copy(dst, src); > - if (ret < 0) > - return ret; > - > - return 0; > -} > - > int ff_parse_creation_time_metadata(AVFormatContext *s, int64_t *timestamp, int return_seconds) > { > AVDictionaryEntry *entry; > diff --git a/libavformat/segment.c b/libavformat/segment.c > index fa435d9f32..c904e20708 100644 > --- a/libavformat/segment.c > +++ b/libavformat/segment.c > @@ -167,11 +167,9 @@ static int segment_mux_init(AVFormatContext *s) > AVStream *st, *ist = s->streams[i]; > AVCodecParameters *ipar = ist->codecpar, *opar; > > - if (!(st = avformat_new_stream(oc, NULL))) > + st = ff_stream_clone(oc, ist); > + if (!st) > return AVERROR(ENOMEM); > - ret = ff_stream_encode_params_copy(st, ist); > - if (ret < 0) > - return ret; > opar = st->codecpar; > if (!oc->oformat->codec_tag || > av_codec_get_id (oc->oformat->codec_tag, ipar->codec_tag) == opar->codec_id || > diff --git a/libavformat/tee.c b/libavformat/tee.c > index f1f2a9d2a5..dd408dd096 100644 > --- a/libavformat/tee.c > +++ b/libavformat/tee.c > @@ -284,14 +284,11 @@ static int open_slave(AVFormatContext *avf, char *slave, TeeSlave *tee_slave) > } > tee_slave->stream_map[i] = stream_count++; > > - if (!(st2 = avformat_new_stream(avf2, NULL))) { > + st2 = ff_stream_clone(avf2, st); > + if (!st2) { > ret = AVERROR(ENOMEM); > goto end; > } > - > - ret = ff_stream_encode_params_copy(st2, st); > - if (ret < 0) > - goto end; > } > > ret = ff_format_output_open(avf2, filename, &options); > diff --git a/libavformat/webm_chunk.c b/libavformat/webm_chunk.c > index d69db3a004..9e71a1209d 100644 > --- a/libavformat/webm_chunk.c > +++ b/libavformat/webm_chunk.c > @@ -91,12 +91,10 @@ static int webm_chunk_init(AVFormatContext *s) > if ((ret = av_dict_copy(&oc->metadata, s->metadata, 0)) < 0) > return ret; > > - if (!(st = avformat_new_stream(oc, NULL))) > + st = ff_stream_clone(oc, ost); > + if (!st) > return AVERROR(ENOMEM); > > - if ((ret = ff_stream_encode_params_copy(st, ost)) < 0) > - return ret; > - > if (wc->http_method) > if ((ret = av_dict_set(&dict, "method", wc->http_method, 0)) < 0) > return ret; _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-08-08 14:48 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-06 23:35 pal 2022-08-06 23:35 ` [FFmpeg-devel] [PATCH v7 2/2] avformat/imfdec: preserve stream information pal 2022-08-08 14:48 ` Andreas Rheinhardt [this message] 2022-08-08 14:50 ` [FFmpeg-devel] [PATCH v7 1/2] avformat: refactor ff_stream_encode_params_copy() to stream_params_copy() Pierre-Anthony Lemieux 2022-08-10 1:05 ` Pierre-Anthony Lemieux 2022-08-12 16:46 ` Pierre-Anthony Lemieux
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=DB6PR0101MB22148A2F9DC1900656FA0C968F639@DB6PR0101MB2214.eurprd01.prod.exchangelabs.com \ --to=andreas.rheinhardt@outlook.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git