From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To: ffmpeg-devel@ffmpeg.org
Subject: Re: [FFmpeg-devel] [PATCH] avutil/frame: add av_frame_replace
Date: Sun, 5 Jun 2022 17:42:37 +0200
Message-ID: <DB6PR0101MB221483C655AE7B8A4C78BC6E8FA39@DB6PR0101MB2214.eurprd01.prod.exchangelabs.com> (raw)
In-Reply-To: <20220605152813.1888-1-jamrial@gmail.com>
James Almer:
> Signed-off-by: James Almer <jamrial@gmail.com>
> ---
> Now taking into account the new channel layout API fields, supporting non
> refcouted src, plus changing the documentation to state that the dst frame
> properties will be replaced by those from src even if the data described
> by both frames is the same.
>
Apparently, you didn't get my point last time: What happens if dst and
src coincide did not mean "what happpens if the data both frames refer
to already coincides"; it meant "what happens if src == dst?" (so that
there is only one AVFrame involved). You either disallow this altogether
or you support it. This patch (and the last one) does neither.
> Still missing APIChanges entry and version bump.
>
> libavutil/frame.c | 144 ++++++++++++++++++++++++++++++++++++++++++++++
> libavutil/frame.h | 17 ++++++
> 2 files changed, 161 insertions(+)
>
> diff --git a/libavutil/frame.c b/libavutil/frame.c
> index 4c16488c66..2a4a2c27ad 100644
> --- a/libavutil/frame.c
> +++ b/libavutil/frame.c
> @@ -461,6 +461,150 @@ fail:
> return ret;
> }
>
> +int av_frame_replace(AVFrame *dst, const AVFrame *src)
> +{
> + int i, ret = 0;
Why don't you use "for (int i = 0;" loop variables?
> +
> + dst->format = src->format;
> + dst->width = src->width;
> + dst->height = src->height;
> + dst->nb_samples = src->nb_samples;
> +#if FF_API_OLD_CHANNEL_LAYOUT
> +FF_DISABLE_DEPRECATION_WARNINGS
> + dst->channels = src->channels;
> + dst->channel_layout = src->channel_layout;
> + if (!av_channel_layout_check(&src->ch_layout)) {
> + av_channel_layout_uninit(&dst->ch_layout);
> + if (src->channel_layout)
> + av_channel_layout_from_mask(&dst->ch_layout, src->channel_layout);
> + else {
> + dst->ch_layout.nb_channels = src->channels;
> + dst->ch_layout.order = AV_CHANNEL_ORDER_UNSPEC;
> + }
> + } else {
> +#endif
> + ret = av_channel_layout_copy(&dst->ch_layout, &src->ch_layout);
> + if (ret < 0)
> + goto fail;
> +#if FF_API_OLD_CHANNEL_LAYOUT
> + }
> +FF_ENABLE_DEPRECATION_WARNINGS
> +#endif
> +
> + wipe_side_data(dst);
> + av_dict_free(&dst->metadata);
> + ret = frame_copy_props(dst, src, 0);
> + if (ret < 0)
> + goto fail;
> +
> + /* duplicate the frame data if it's not refcounted */
> + if (!src->buf[0]) {
> + for (i = 0; i < FF_ARRAY_ELEMS(dst->buf); i++)
> + av_buffer_unref(&dst->buf[i]);
> + for (i = 0; i < dst->nb_extended_buf; i++)
> + av_buffer_unref(&dst->extended_buf[i]);
> + av_freep(&dst->extended_buf);
> +
> + memset(dst->data, 0, sizeof(dst->data));
> + if (dst->extended_data != dst->data)
> + av_freep(&dst->extended_data);
> +
> + ret = av_frame_get_buffer(dst, 0);
> + if (ret < 0)
> + goto fail;
> +
> + ret = av_frame_copy(dst, src);
> + if (ret < 0)
> + goto fail;
> +
> + ret = av_buffer_replace(&dst->hw_frames_ctx, src->hw_frames_ctx);
> + if (ret < 0)
> + goto fail;
> +
> + return 0;
> + }
> +
> + /* replace the buffers */
> + for (i = 0; i < FF_ARRAY_ELEMS(src->buf); i++) {
> + ret = av_buffer_replace(&dst->buf[i], src->buf[i]);
> + if (ret < 0)
> + goto fail;
> + }
> +
> + if (src->extended_buf) {
> + if (dst->nb_extended_buf != src->nb_extended_buf) {
> + int nb_extended_buf = FFMIN(dst->nb_extended_buf, src->nb_extended_buf);
> + void *tmp;
> +
> + for (i = nb_extended_buf; i < dst->nb_extended_buf; i++)
> + av_buffer_unref(&dst->extended_buf[i]);
> +
> + tmp = av_realloc_array(dst->extended_buf, sizeof(*dst->extended_buf),
> + src->nb_extended_buf);
> + if (!tmp) {
> + ret = AVERROR(ENOMEM);
> + goto fail;
> + }
> + dst->extended_buf = tmp;
> + dst->nb_extended_buf = src->nb_extended_buf;
> +
> + memset(&dst->extended_buf[nb_extended_buf], 0,
> + (src->nb_extended_buf - nb_extended_buf) * sizeof(*dst->extended_buf));
> + }
> +
> + for (i = 0; i < src->nb_extended_buf; i++) {
> + ret = av_buffer_replace(&dst->extended_buf[i], src->extended_buf[i]);
> + if (ret < 0)
> + goto fail;
> + }
> + } else if (dst->extended_buf) {
> + for (i = 0; i < dst->nb_extended_buf; i++)
> + av_buffer_unref(&dst->extended_buf[i]);
> + av_freep(&dst->extended_buf);
> + }
> +
> + ret = av_buffer_replace(&dst->hw_frames_ctx, src->hw_frames_ctx);
> + if (ret < 0)
> + goto fail;
> +
> + if (dst->extended_data != dst->data)
> + av_freep(&dst->extended_data);
> +
> + if (src->extended_data != src->data) {
> + int ch = src->ch_layout.nb_channels;
> +
> +#if FF_API_OLD_CHANNEL_LAYOUT
> +FF_DISABLE_DEPRECATION_WARNINGS
> + if (!ch) {
> + ch = src->channels;
> + CHECK_CHANNELS_CONSISTENCY(src);
> + }
> +FF_ENABLE_DEPRECATION_WARNINGS
> +#endif
> + if (!ch) {
> + ret = AVERROR(EINVAL);
> + goto fail;
> + }
> +
> + dst->extended_data = av_malloc_array(sizeof(*dst->extended_data), ch);
> + if (!dst->extended_data) {
> + ret = AVERROR(ENOMEM);
> + goto fail;
> + }
> + memcpy(dst->extended_data, src->extended_data, sizeof(*src->extended_data) * ch);
> + } else
> + dst->extended_data = dst->data;
> +
> + memcpy(dst->data, src->data, sizeof(src->data));
> + memcpy(dst->linesize, src->linesize, sizeof(src->linesize));
> +
> + return 0;
> +
> +fail:
> + av_frame_unref(dst);
> + return ret;
> +}
> +
> AVFrame *av_frame_clone(const AVFrame *src)
> {
> AVFrame *ret = av_frame_alloc();
> diff --git a/libavutil/frame.h b/libavutil/frame.h
> index 33fac2054c..a971b1655e 100644
> --- a/libavutil/frame.h
> +++ b/libavutil/frame.h
> @@ -752,6 +752,23 @@ void av_frame_free(AVFrame **frame);
> */
> int av_frame_ref(AVFrame *dst, const AVFrame *src);
>
> +/**
> + * Ensure the destination frame refers to the same data described by the source
> + * frame by creating a new reference for each AVBufferRef from src if they
> + * differ from those in dst, or if src is not reference counted, by allocating
> + * new buffers and copying data.
> + *
> + * Frame properties on dst will be replaced by those from src.
> + *
> + * @param src The source frame. If there's data described in it, it must be
> + * reference counted.
The text above says "if src is not reference counted, by allocating new
buffers and copying data".
> + * @param dst The destination frame.
> + *
> + * @return 0 on success, a negative AVERROR on error. On error, dst is
> + * unreferenced.
> + */
> +int av_frame_replace(AVFrame *dst, const AVFrame *src);
> +
> /**
> * Create a new frame that references the same data as src.
> *
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-06-05 15:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-05 15:28 James Almer
2022-06-05 15:42 ` Andreas Rheinhardt [this message]
2022-06-05 15:52 ` James Almer
2022-06-05 17:44 ` [FFmpeg-devel] [PATCH v2] " James Almer
2022-06-07 10:21 ` Anton Khirnov
2022-06-07 11:39 ` James Almer
2022-06-07 11:47 ` Anton Khirnov
2022-06-07 12:02 ` [FFmpeg-devel] [PATCH v3] " James Almer
2022-06-07 12:18 ` Nicolas George
2022-06-07 12:22 ` James Almer
2022-06-07 12:23 ` Nicolas George
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB6PR0101MB221483C655AE7B8A4C78BC6E8FA39@DB6PR0101MB2214.eurprd01.prod.exchangelabs.com \
--to=andreas.rheinhardt@outlook.com \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git