From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To: ffmpeg-devel@ffmpeg.org
Subject: Re: [FFmpeg-devel] [PATCH v5 1/2] avformat: refactor ff_stream_encode_params_copy() to ff_stream_params_copy()
Date: Thu, 4 Aug 2022 19:15:33 +0200
Message-ID: <DB6PR0101MB22141AEA0BBF9304864124C18F9F9@DB6PR0101MB2214.eurprd01.prod.exchangelabs.com> (raw)
In-Reply-To: <CAF_7JxDw=95-MRSgrgAVQipD1DPZivfcHnqdJJGDa2AW3nXYQQ@mail.gmail.com>
Pierre-Anthony Lemieux:
> On Thu, Aug 4, 2022 at 9:53 AM Andreas Rheinhardt
> <andreas.rheinhardt@outlook.com> wrote:
>>
>> pal@sandflow.com:
>>> From: Pierre-Anthony Lemieux <pal@palemieux.com>
>>>
>>> As discussed at https://ffmpeg.org/pipermail/ffmpeg-devel/2022-July/298491.html.
>>> Note that ff_stream_params_copy() does not copy:
>>> * the index field
>>> * the attached_pic if its size is 0
>>>
>>> Addresses http://ffmpeg.org/pipermail/ffmpeg-devel/2022-August/299514.html
>>>
>>> ---
>>> libavformat/avformat.c | 40 ++++++++++++++++++++++++++++++++++++++++
>>> libavformat/fifo.c | 2 +-
>>> libavformat/internal.h | 12 ++++++++++++
>>> libavformat/mux.h | 9 ---------
>>> libavformat/mux_utils.c | 28 ----------------------------
>>> libavformat/segment.c | 2 +-
>>> libavformat/tee.c | 2 +-
>>> libavformat/webm_chunk.c | 2 +-
>>> 8 files changed, 56 insertions(+), 41 deletions(-)
>>>
>>> diff --git a/libavformat/avformat.c b/libavformat/avformat.c
>>> index 30d6ea6a49..242187c359 100644
>>> --- a/libavformat/avformat.c
>>> +++ b/libavformat/avformat.c
>>> @@ -235,6 +235,46 @@ int ff_stream_side_data_copy(AVStream *dst, const AVStream *src)
>>> return 0;
>>> }
>>>
>>> +int ff_stream_params_copy(AVStream *dst, const AVStream *src)
>>> +{
>>> + int ret;
>>> +
>>> + dst->id = src->id;
>>> + dst->time_base = src->time_base;
>>> + dst->start_time = src->start_time;
>>> + dst->duration = src->duration;
>>> + dst->nb_frames = src->nb_frames;
>>> + dst->disposition = src->disposition;
>>> + dst->discard = src->discard;
>>> + dst->sample_aspect_ratio = src->sample_aspect_ratio;
>>> + dst->avg_frame_rate = src->avg_frame_rate;
>>> + dst->event_flags = src->event_flags;
>>> + dst->r_frame_rate = src->r_frame_rate;
>>> + dst->pts_wrap_bits = src->pts_wrap_bits;
>>> +
>>> + av_dict_free(&dst->metadata);
>>> + ret = av_dict_copy(&dst->metadata, src->metadata, 0);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + ret = avcodec_parameters_copy(dst->codecpar, src->codecpar);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + ret = ff_stream_side_data_copy(dst, src);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + av_packet_unref(&dst->attached_pic);
>>> + if (src->attached_pic.size > 0) {
>>> + ret = av_packet_ref(&dst->attached_pic, &src->attached_pic);
>>> + if (ret < 0)
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> AVProgram *av_new_program(AVFormatContext *ac, int id)
>>> {
>>> AVProgram *program = NULL;
>>> diff --git a/libavformat/fifo.c b/libavformat/fifo.c
>>> index ead2bdc5cf..fef116d040 100644
>>> --- a/libavformat/fifo.c
>>> +++ b/libavformat/fifo.c
>>> @@ -509,7 +509,7 @@ static int fifo_mux_init(AVFormatContext *avf, const AVOutputFormat *oformat,
>>> if (!st)
>>> return AVERROR(ENOMEM);
>>>
>>> - ret = ff_stream_encode_params_copy(st, avf->streams[i]);
>>> + ret = ff_stream_params_copy(st, avf->streams[i]);
>>> if (ret < 0)
>>> return ret;
>>> }
>>> diff --git a/libavformat/internal.h b/libavformat/internal.h
>>> index b6b8fbf56f..87a00bbae3 100644
>>> --- a/libavformat/internal.h
>>> +++ b/libavformat/internal.h
>>> @@ -625,6 +625,18 @@ enum AVCodecID ff_get_pcm_codec_id(int bps, int flt, int be, int sflags);
>>> */
>>> int ff_stream_side_data_copy(AVStream *dst, const AVStream *src);
>>>
>>> +/**
>>> + * Copy all stream parameters from source to destination stream, with the
>>> + * exception of:
>>> + * * the index field, which is usually set by avformat_new_stream()
>>> + * * the attached_pic field, if attached_pic.size is 0 or less
>>> + *
>>> + * @param dst pointer to destination AVStream
>>> + * @param src pointer to source AVStream
>>> + * @return >=0 on success, AVERROR code on error
>>> + */
>>> +int ff_stream_params_copy(AVStream *dst, const AVStream *src);
>>> +
>>> /**
>>> * Wrap ffurl_move() and log if error happens.
>>> *
>>> diff --git a/libavformat/mux.h b/libavformat/mux.h
>>> index c01da82194..1bfcaf795f 100644
>>> --- a/libavformat/mux.h
>>> +++ b/libavformat/mux.h
>>> @@ -113,15 +113,6 @@ int ff_format_shift_data(AVFormatContext *s, int64_t read_start, int shift_size)
>>> */
>>> int ff_format_output_open(AVFormatContext *s, const char *url, AVDictionary **options);
>>>
>>> -/**
>>> - * Copy encoding parameters from source to destination stream
>>> - *
>>> - * @param dst pointer to destination AVStream
>>> - * @param src pointer to source AVStream
>>> - * @return >=0 on success, AVERROR code on error
>>> - */
>>> -int ff_stream_encode_params_copy(AVStream *dst, const AVStream *src);
>>> -
>>> /**
>>> * Parse creation_time in AVFormatContext metadata if exists and warn if the
>>> * parsing fails.
>>> diff --git a/libavformat/mux_utils.c b/libavformat/mux_utils.c
>>> index eb8ea3d560..2fa2ab5b0f 100644
>>> --- a/libavformat/mux_utils.c
>>> +++ b/libavformat/mux_utils.c
>>> @@ -121,34 +121,6 @@ int ff_format_output_open(AVFormatContext *s, const char *url, AVDictionary **op
>>> return 0;
>>> }
>>>
>>> -int ff_stream_encode_params_copy(AVStream *dst, const AVStream *src)
>>> -{
>>> - int ret;
>>> -
>>> - dst->id = src->id;
>>> - dst->time_base = src->time_base;
>>> - dst->nb_frames = src->nb_frames;
>>> - dst->disposition = src->disposition;
>>> - dst->sample_aspect_ratio = src->sample_aspect_ratio;
>>> - dst->avg_frame_rate = src->avg_frame_rate;
>>> - dst->r_frame_rate = src->r_frame_rate;
>>> -
>>> - av_dict_free(&dst->metadata);
>>> - ret = av_dict_copy(&dst->metadata, src->metadata, 0);
>>> - if (ret < 0)
>>> - return ret;
>>> -
>>> - ret = avcodec_parameters_copy(dst->codecpar, src->codecpar);
>>> - if (ret < 0)
>>> - return ret;
>>> -
>>> - ret = ff_stream_side_data_copy(dst, src);
>>> - if (ret < 0)
>>> - return ret;
>>> -
>>> - return 0;
>>> -}
>>> -
>>> int ff_parse_creation_time_metadata(AVFormatContext *s, int64_t *timestamp, int return_seconds)
>>> {
>>> AVDictionaryEntry *entry;
>>> diff --git a/libavformat/segment.c b/libavformat/segment.c
>>> index fa435d9f32..a8f3e94714 100644
>>> --- a/libavformat/segment.c
>>> +++ b/libavformat/segment.c
>>> @@ -169,7 +169,7 @@ static int segment_mux_init(AVFormatContext *s)
>>>
>>> if (!(st = avformat_new_stream(oc, NULL)))
>>> return AVERROR(ENOMEM);
>>> - ret = ff_stream_encode_params_copy(st, ist);
>>> + ret = ff_stream_params_copy(st, ist);
>>> if (ret < 0)
>>> return ret;
>>> opar = st->codecpar;
>>> diff --git a/libavformat/tee.c b/libavformat/tee.c
>>> index f1f2a9d2a5..dbfad604d0 100644
>>> --- a/libavformat/tee.c
>>> +++ b/libavformat/tee.c
>>> @@ -289,7 +289,7 @@ static int open_slave(AVFormatContext *avf, char *slave, TeeSlave *tee_slave)
>>> goto end;
>>> }
>>>
>>> - ret = ff_stream_encode_params_copy(st2, st);
>>> + ret = ff_stream_params_copy(st2, st);
>>> if (ret < 0)
>>> goto end;
>>> }
>>> diff --git a/libavformat/webm_chunk.c b/libavformat/webm_chunk.c
>>> index d69db3a004..39f21fce7a 100644
>>> --- a/libavformat/webm_chunk.c
>>> +++ b/libavformat/webm_chunk.c
>>> @@ -94,7 +94,7 @@ static int webm_chunk_init(AVFormatContext *s)
>>> if (!(st = avformat_new_stream(oc, NULL)))
>>> return AVERROR(ENOMEM);
>>>
>>> - if ((ret = ff_stream_encode_params_copy(st, ost)) < 0)
>>> + if ((ret = ff_stream_params_copy(st, ost)) < 0)
>>> return ret;
>>>
>>> if (wc->http_method)
>>
>> Looking at these callers shows that they all have one thing in common:
>> They create a stream and immediately afterwards copy stream parameters.
>> The caller that you intend to add in #2 does the same. How about we make
>> a function that is equivalent to
>> avformat_new_stream+ff_stream_params_copy above and use that? (But
>> please leave ff_stream_params_copy as it is in the form of a static
>> function.)
>
> avformat_clone_stream()?
>
I was not thinking about a public function. But clone_stream sounds good.
- Andreas
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-08-04 17:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-31 21:51 pal
2022-07-31 21:51 ` [FFmpeg-devel] [PATCH v5 2/2] avformat/imfdec: preserve stream information pal
2022-08-04 16:53 ` [FFmpeg-devel] [PATCH v5 1/2] avformat: refactor ff_stream_encode_params_copy() to ff_stream_params_copy() Andreas Rheinhardt
2022-08-04 17:13 ` Pierre-Anthony Lemieux
2022-08-04 17:15 ` Andreas Rheinhardt [this message]
2022-08-04 19:38 ` Pierre-Anthony Lemieux
2022-08-04 22:22 ` Andreas Rheinhardt
2022-08-04 23:08 ` Pierre-Anthony Lemieux
2022-08-04 23:13 ` Andreas Rheinhardt
2022-08-04 23:24 ` Pierre-Anthony Lemieux
2022-08-05 15:21 ` Pierre-Anthony Lemieux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB6PR0101MB22141AEA0BBF9304864124C18F9F9@DB6PR0101MB2214.eurprd01.prod.exchangelabs.com \
--to=andreas.rheinhardt@outlook.com \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git