From: Paul B Mahol <onemda@gmail.com> To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> Subject: Re: [FFmpeg-devel] [PATCH 2/2] avcodec/mjpegdec: add support for frame threading Date: Mon, 5 Dec 2022 15:28:06 +0100 Message-ID: <CAPYw7P4EvXTSec8qkF3THGYtEo+fHwvERJRFjqXsOd6uD--zGw@mail.gmail.com> (raw) In-Reply-To: <GV1P250MB0737AF32C8BFA90566316F368F189@GV1P250MB0737.EURP250.PROD.OUTLOOK.COM> On 12/5/22, Andreas Rheinhardt <andreas.rheinhardt@outlook.com> wrote: > Timo Rothenpieler: >> In my tests, this lead to a notable speed increase with the amount >> of threads used. Decoding a 720p sample gave the following results: >> >> 1 Thread: 1428 FPS >> 2 Threads: 2501 FPS >> 8 Threads: 7575 FPS >> Automatic: 11326 FPS (On a 16 Core/32 Threads system) >> --- >> libavcodec/jpeglsdec.c | 2 +- >> libavcodec/mjpegdec.c | 13 +++++++------ >> libavcodec/sp5xdec.c | 4 ++-- >> 3 files changed, 10 insertions(+), 9 deletions(-) >> >> diff --git a/libavcodec/jpeglsdec.c b/libavcodec/jpeglsdec.c >> index 2e6d018ea6..c0642e8e30 100644 >> --- a/libavcodec/jpeglsdec.c >> +++ b/libavcodec/jpeglsdec.c >> @@ -559,7 +559,7 @@ const FFCodec ff_jpegls_decoder = { >> .init = ff_mjpeg_decode_init, >> .close = ff_mjpeg_decode_end, >> FF_CODEC_RECEIVE_FRAME_CB(ff_mjpeg_receive_frame), >> - .p.capabilities = AV_CODEC_CAP_DR1, >> + .p.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_FRAME_THREADS, >> .caps_internal = FF_CODEC_CAP_INIT_CLEANUP | >> FF_CODEC_CAP_SETS_PKT_DTS, >> }; >> diff --git a/libavcodec/mjpegdec.c b/libavcodec/mjpegdec.c >> index 9b7465abe7..d30d722398 100644 >> --- a/libavcodec/mjpegdec.c >> +++ b/libavcodec/mjpegdec.c >> @@ -54,6 +54,7 @@ >> #include "exif.h" >> #include "bytestream.h" >> #include "tiff_common.h" >> +#include "thread.h" >> >> >> static int init_default_huffman_tables(MJpegDecodeContext *s) >> @@ -713,7 +714,7 @@ int ff_mjpeg_decode_sof(MJpegDecodeContext *s) >> s->avctx->pix_fmt, >> AV_PIX_FMT_NONE, >> }; >> - s->hwaccel_pix_fmt = ff_get_format(s->avctx, pix_fmts); >> + s->hwaccel_pix_fmt = ff_thread_get_format(s->avctx, >> pix_fmts); >> if (s->hwaccel_pix_fmt < 0) >> return AVERROR(EINVAL); >> >> @@ -729,7 +730,7 @@ int ff_mjpeg_decode_sof(MJpegDecodeContext *s) >> } >> >> av_frame_unref(s->picture_ptr); >> - if (ff_get_buffer(s->avctx, s->picture_ptr, >> AV_GET_BUFFER_FLAG_REF) < 0) >> + if (ff_thread_get_buffer(s->avctx, s->picture_ptr, >> AV_GET_BUFFER_FLAG_REF) < 0) >> return -1; >> s->picture_ptr->pict_type = AV_PICTURE_TYPE_I; >> s->picture_ptr->key_frame = 1; >> @@ -2388,7 +2389,7 @@ static int mjpeg_get_packet(AVCodecContext *avctx) >> int ret; >> >> av_packet_unref(s->pkt); >> - ret = ff_decode_get_packet(avctx, s->pkt); >> + ret = ff_thread_decode_get_packet(avctx, s->pkt); >> if (ret < 0) >> return ret; >> >> @@ -3020,7 +3021,7 @@ const FFCodec ff_mjpeg_decoder = { >> .close = ff_mjpeg_decode_end, >> FF_CODEC_RECEIVE_FRAME_CB(ff_mjpeg_receive_frame), >> .flush = decode_flush, >> - .p.capabilities = AV_CODEC_CAP_DR1, >> + .p.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_FRAME_THREADS, >> .p.max_lowres = 3, >> .p.priv_class = &mjpegdec_class, >> .p.profiles = NULL_IF_CONFIG_SMALL(ff_mjpeg_profiles), >> @@ -3050,7 +3051,7 @@ const FFCodec ff_thp_decoder = { >> .close = ff_mjpeg_decode_end, >> FF_CODEC_RECEIVE_FRAME_CB(ff_mjpeg_receive_frame), >> .flush = decode_flush, >> - .p.capabilities = AV_CODEC_CAP_DR1, >> + .p.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_FRAME_THREADS, >> .p.max_lowres = 3, >> .caps_internal = FF_CODEC_CAP_INIT_CLEANUP | >> FF_CODEC_CAP_SETS_PKT_DTS, >> @@ -3068,7 +3069,7 @@ const FFCodec ff_smvjpeg_decoder = { >> .close = ff_mjpeg_decode_end, >> FF_CODEC_RECEIVE_FRAME_CB(ff_mjpeg_receive_frame), >> .flush = decode_flush, >> - .p.capabilities = AV_CODEC_CAP_DR1, >> + .p.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_FRAME_THREADS, >> .caps_internal = FF_CODEC_CAP_EXPORTS_CROPPING | >> FF_CODEC_CAP_SETS_PKT_DTS | >> FF_CODEC_CAP_INIT_CLEANUP, >> }; >> diff --git a/libavcodec/sp5xdec.c b/libavcodec/sp5xdec.c >> index 394448c5a9..8b08dc672a 100644 >> --- a/libavcodec/sp5xdec.c >> +++ b/libavcodec/sp5xdec.c >> @@ -101,7 +101,7 @@ const FFCodec ff_sp5x_decoder = { >> .init = ff_mjpeg_decode_init, >> .close = ff_mjpeg_decode_end, >> FF_CODEC_RECEIVE_FRAME_CB(ff_mjpeg_receive_frame), >> - .p.capabilities = AV_CODEC_CAP_DR1, >> + .p.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_FRAME_THREADS, >> .p.max_lowres = 3, >> .caps_internal = FF_CODEC_CAP_INIT_CLEANUP | >> FF_CODEC_CAP_SETS_PKT_DTS, >> @@ -118,7 +118,7 @@ const FFCodec ff_amv_decoder = { >> .close = ff_mjpeg_decode_end, >> FF_CODEC_RECEIVE_FRAME_CB(ff_mjpeg_receive_frame), >> .p.max_lowres = 3, >> - .p.capabilities = AV_CODEC_CAP_DR1, >> + .p.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_FRAME_THREADS, >> .caps_internal = FF_CODEC_CAP_INIT_CLEANUP | >> FF_CODEC_CAP_SETS_PKT_DTS, >> }; > > Can you test the sample that Michael mentioned here: > https://patchwork.ffmpeg.org/project/ffmpeg/patch/AS8PR01MB7944E105BE990A5D01EF89208FEF9@AS8PR01MB7944.eurprd01.prod.exchangelabs.com/? > (I never got around to analyzing this, but if I am not mistaken, it > shows that this decoder is not a simple one-in, one-out decoder, so that > making it multithreaded will be more complicated than just adding the > flag and using ff_thread_get_buffer/format.) That is full FUD. > > - Andreas > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-12-05 14:28 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-12-05 13:39 [FFmpeg-devel] [PATCH 1/2] avcodec/thread: add support for frame threading receive_frame based decoders Timo Rothenpieler 2022-12-05 13:39 ` [FFmpeg-devel] [PATCH 2/2] avcodec/mjpegdec: add support for frame threading Timo Rothenpieler 2022-12-05 14:15 ` Andreas Rheinhardt 2022-12-05 14:28 ` Paul B Mahol [this message] 2022-12-05 23:02 ` Timo Rothenpieler 2023-09-07 17:17 ` Paul B Mahol 2023-09-07 17:28 ` Paul B Mahol 2022-12-06 14:37 ` [FFmpeg-devel] [PATCH 1/2] avcodec/thread: add support for frame threading receive_frame based decoders Anton Khirnov 2022-12-06 14:39 ` Timo Rothenpieler 2022-12-06 14:43 ` Anton Khirnov 2022-12-06 15:08 ` Timo Rothenpieler 2022-12-06 16:00 ` Anton Khirnov 2022-12-07 11:43 [FFmpeg-devel] [PATCH 1/2] lavc: convert frame threading to the receive_frame() pattern Timo Rothenpieler 2022-12-07 11:43 ` [FFmpeg-devel] [PATCH 2/2] avcodec/mjpegdec: add support for frame threading Timo Rothenpieler
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAPYw7P4EvXTSec8qkF3THGYtEo+fHwvERJRFjqXsOd6uD--zGw@mail.gmail.com \ --to=onemda@gmail.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git