* [FFmpeg-devel] [PATCH v2 2/2] avcodec/vvcdec: ff_vvc_frame_submit, avoid initializing task twice.
[not found] <20240425140136.96867-1-nuomi2021@gmail.com>
@ 2024-04-25 14:01 ` Nuo Mi
2024-05-06 12:35 ` Nuo Mi
0 siblings, 1 reply; 2+ messages in thread
From: Nuo Mi @ 2024-04-25 14:01 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Frank Plowman, Nuo Mi
For some error bitstreams, a CTU belongs to two slices/entry points.
If the decoder initializes and submmits the CTU task twice, it may crash the program
or cause it to enter an infinite loop.
Reported-by: Frank Plowman <post@frankplowman.com>
---
libavcodec/vvc/dec.c | 10 ++++++++--
libavcodec/vvc/thread.c | 43 ++++++++++++++++++++++++++++-------------
libavcodec/vvc/thread.h | 2 +-
3 files changed, 39 insertions(+), 16 deletions(-)
diff --git a/libavcodec/vvc/dec.c b/libavcodec/vvc/dec.c
index 92999a3ce3..1b62f6199f 100644
--- a/libavcodec/vvc/dec.c
+++ b/libavcodec/vvc/dec.c
@@ -900,10 +900,16 @@ static int wait_delayed_frame(VVCContext *s, AVFrame *output, int *got_output)
static int submit_frame(VVCContext *s, VVCFrameContext *fc, AVFrame *output, int *got_output)
{
- int ret;
+ int ret = ff_vvc_frame_submit(s, fc);
+
+ if (ret < 0) {
+ ff_vvc_report_frame_finished(fc->ref);
+ return ret;
+ }
+
s->nb_frames++;
s->nb_delayed++;
- ff_vvc_frame_submit(s, fc);
+
if (s->nb_delayed >= s->nb_fcs) {
if ((ret = wait_delayed_frame(s, output, got_output)) < 0)
return ret;
diff --git a/libavcodec/vvc/thread.c b/libavcodec/vvc/thread.c
index 01c3ff75b1..3b27811db2 100644
--- a/libavcodec/vvc/thread.c
+++ b/libavcodec/vvc/thread.c
@@ -124,11 +124,17 @@ static void task_init(VVCTask *t, VVCTaskStage stage, VVCFrameContext *fc, const
atomic_store(&t->target_inter_score, 0);
}
-static void task_init_parse(VVCTask *t, SliceContext *sc, EntryPoint *ep, const int ctu_idx)
+static int task_init_parse(VVCTask *t, SliceContext *sc, EntryPoint *ep, const int ctu_idx)
{
+ if (t->sc) {
+ // the task already inited, error bitstream
+ return AVERROR_INVALIDDATA;
+ }
t->sc = sc;
t->ep = ep;
t->ctu_idx = ctu_idx;
+
+ return 0;
}
static uint8_t task_add_score(VVCTask *t, const VVCTaskStage stage)
@@ -758,24 +764,35 @@ static void submit_entry_point(VVCContext *s, VVCFrameThread *ft, SliceContext *
frame_thread_add_score(s, ft, t->rx, t->ry, VVC_TASK_STAGE_PARSE);
}
-void ff_vvc_frame_submit(VVCContext *s, VVCFrameContext *fc)
+int ff_vvc_frame_submit(VVCContext *s, VVCFrameContext *fc)
{
VVCFrameThread *ft = fc->ft;
- for (int i = 0; i < fc->nb_slices; i++) {
- SliceContext *sc = fc->slices[i];
- for (int j = 0; j < sc->nb_eps; j++) {
- EntryPoint *ep = sc->eps + j;
- for (int k = ep->ctu_start; k < ep->ctu_end; k++) {
- const int rs = sc->sh.ctb_addr_in_curr_slice[k];
- VVCTask *t = ft->tasks + rs;
-
- task_init_parse(t, sc, ep, k);
- check_colocation(s, t);
+ // We'll handle this in two passes:
+ // Pass 0 to initialize tasks with parser, this will help detect bit stream error
+ // Pass 1 to shedule location check and submit the entry point
+ for (int pass = 0; pass < 2; pass++) {
+ for (int i = 0; i < fc->nb_slices; i++) {
+ SliceContext *sc = fc->slices[i];
+ for (int j = 0; j < sc->nb_eps; j++) {
+ EntryPoint *ep = sc->eps + j;
+ for (int k = ep->ctu_start; k < ep->ctu_end; k++) {
+ const int rs = sc->sh.ctb_addr_in_curr_slice[k];
+ VVCTask *t = ft->tasks + rs;
+ if (pass) {
+ check_colocation(s, t);
+ } else {
+ const int ret = task_init_parse(t, sc, ep, k);
+ if (ret < 0)
+ return ret;
+ }
+ }
+ if (pass)
+ submit_entry_point(s, ft, sc, ep);
}
- submit_entry_point(s, ft, sc, ep);
}
}
+ return 0;
}
int ff_vvc_frame_wait(VVCContext *s, VVCFrameContext *fc)
diff --git a/libavcodec/vvc/thread.h b/libavcodec/vvc/thread.h
index 55bb4ea244..8ac59b2ecf 100644
--- a/libavcodec/vvc/thread.h
+++ b/libavcodec/vvc/thread.h
@@ -30,7 +30,7 @@ void ff_vvc_executor_free(struct AVExecutor **e);
int ff_vvc_frame_thread_init(VVCFrameContext *fc);
void ff_vvc_frame_thread_free(VVCFrameContext *fc);
-void ff_vvc_frame_submit(VVCContext *s, VVCFrameContext *fc);
+int ff_vvc_frame_submit(VVCContext *s, VVCFrameContext *fc);
int ff_vvc_frame_wait(VVCContext *s, VVCFrameContext *fc);
#endif // AVCODEC_VVC_THREAD_H
--
2.34.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [FFmpeg-devel] [PATCH v2 2/2] avcodec/vvcdec: ff_vvc_frame_submit, avoid initializing task twice.
2024-04-25 14:01 ` [FFmpeg-devel] [PATCH v2 2/2] avcodec/vvcdec: ff_vvc_frame_submit, avoid initializing task twice Nuo Mi
@ 2024-05-06 12:35 ` Nuo Mi
0 siblings, 0 replies; 2+ messages in thread
From: Nuo Mi @ 2024-05-06 12:35 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Frank Plowman
On Thu, Apr 25, 2024 at 10:02 PM Nuo Mi <nuomi2021@gmail.com> wrote:
> For some error bitstreams, a CTU belongs to two slices/entry points.
> If the decoder initializes and submmits the CTU task twice, it may crash
> the program
> or cause it to enter an infinite loop.
>
> Reported-by: Frank Plowman <post@frankplowman.com>
>
> Applied.
Thank you
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-05-06 12:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20240425140136.96867-1-nuomi2021@gmail.com>
2024-04-25 14:01 ` [FFmpeg-devel] [PATCH v2 2/2] avcodec/vvcdec: ff_vvc_frame_submit, avoid initializing task twice Nuo Mi
2024-05-06 12:35 ` Nuo Mi
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git