* [FFmpeg-devel] I have an issue when try to using h264_amf encoding rtsp stream
@ 2023-04-11 7:41 罗勇刚(Yonggang Luo)
2023-04-18 17:55 ` Dmitrii Ovchinnikov
0 siblings, 1 reply; 5+ messages in thread
From: 罗勇刚(Yonggang Luo) @ 2023-04-11 7:41 UTC (permalink / raw)
To: ffmpeg-devel
When using libx264:
The pull result is:
```
C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay -max_delay
0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
+nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
FFmpeg developers
built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
configuration: --enable-gpl --enable-version3 --enable-shared
--disable-w32threads --disable-autodetect --enable-fontconfig
--enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib
--enable-lzma --enable-libsnappy --enable-zlib --enable-librist
--enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
--enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
--enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
--enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
--enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
--enable-libjxl --enable-libopenjpeg --enable-libvpx
--enable-mediafoundation --enable-libass --enable-frei0r
--enable-libfreetype --enable-libfribidi --enable-liblensfun
--enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
--enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
--enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
--enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
--enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt
--enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
--enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
--enable-libilbc --enable-libgsm --enable-libopencore-amrnb
--enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
--enable-libbs2b --enable-libflite --enable-libmysofa
--enable-librubberband --enable-libsoxr --enable-chromaprint
libavutil 58. 2.100 / 58. 2.100
libavcodec 60. 3.100 / 60. 3.100
libavformat 60. 3.100 / 60. 3.100
libavdevice 60. 1.100 / 60. 1.100
libavfilter 9. 3.100 / 9. 3.100
libswscale 7. 1.100 / 7. 1.100
libswresample 4. 10.100 / 4. 10.100
libpostproc 57. 1.100 / 57. 1.100
Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
Duration: N/A, start: -0.017911, bitrate: N/A
Stream #0:0: Video: h264 (High), yuv420p(progressive), 1920x1060, 50 fps,
50 tbr, 90k tbn
3.79 M-V: 3.731 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
```
But when using h264_amf:
```
C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay -max_delay
0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
+nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
FFmpeg developers
built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
configuration: --enable-gpl --enable-version3 --enable-shared
--disable-w32threads --disable-autodetect --enable-fontconfig
--enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib
--enable-lzma --enable-libsnappy --enable-zlib --enable-librist
--enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
--enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
--enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
--enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
--enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
--enable-libjxl --enable-libopenjpeg --enable-libvpx
--enable-mediafoundation --enable-libass --enable-frei0r
--enable-libfreetype --enable-libfribidi --enable-liblensfun
--enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
--enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
--enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
--enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
--enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt
--enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
--enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
--enable-libilbc --enable-libgsm --enable-libopencore-amrnb
--enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
--enable-libbs2b --enable-libflite --enable-libmysofa
--enable-librubberband --enable-libsoxr --enable-chromaprint
libavutil 58. 2.100 / 58. 2.100
libavcodec 60. 3.100 / 60. 3.100
libavformat 60. 3.100 / 60. 3.100
libavdevice 60. 1.100 / 60. 1.100
libavfilter 9. 3.100 / 9. 3.100
libswscale 7. 1.100 / 7. 1.100
libswresample 4. 10.100 / 4. 10.100
libpostproc 57. 1.100 / 57. 1.100
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
[h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
Last message repeated 1 times
[h264 @ 000001ba7836b100] decode_slice_header error
[h264 @ 000001ba7836b100] no frame!
```
And if I start the ffplay pull script before the rstp push executable,
then it can decoding the stream properly.
```
C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay -max_delay
0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
+nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
FFmpeg developers
built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
configuration: --enable-gpl --enable-version3 --enable-shared
--disable-w32threads --disable-autodetect --enable-fontconfig
--enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib
--enable-lzma --enable-libsnappy --enable-zlib --enable-librist
--enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
--enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
--enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
--enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
--enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
--enable-libjxl --enable-libopenjpeg --enable-libvpx
--enable-mediafoundation --enable-libass --enable-frei0r
--enable-libfreetype --enable-libfribidi --enable-liblensfun
--enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
--enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
--enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
--enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
--enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt
--enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
--enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
--enable-libilbc --enable-libgsm --enable-libopencore-amrnb
--enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
--enable-libbs2b --enable-libflite --enable-libmysofa
--enable-librubberband --enable-libsoxr --enable-chromaprint
libavutil 58. 2.100 / 58. 2.100
libavcodec 60. 3.100 / 60. 3.100
libavformat 60. 3.100 / 60. 3.100
libavdevice 60. 1.100 / 60. 1.100
libavfilter 9. 3.100 / 9. 3.100
libswscale 7. 1.100 / 7. 1.100
libswresample 4. 10.100 / 4. 10.100
libpostproc 57. 1.100 / 57. 1.100
Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
Duration: N/A, start: -0.053911, bitrate: N/A
Stream #0:0: Video: h264 (Main), yuv420p(tv, bt709/reserved/reserved,
progressive), 1920x1060 [SAR 1:1 DAR 96:53], 50 fps, 50 tbr, 90k tbn
```
Is that a bug of h264_amf or the config option for h264_amf is invalid?
--
此致
礼
罗勇刚
Yours
sincerely,
Yonggang Luo
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [FFmpeg-devel] I have an issue when try to using h264_amf encoding rtsp stream
2023-04-11 7:41 [FFmpeg-devel] I have an issue when try to using h264_amf encoding rtsp stream 罗勇刚(Yonggang Luo)
@ 2023-04-18 17:55 ` Dmitrii Ovchinnikov
2023-04-19 5:15 ` 罗勇刚(Yonggang Luo)
0 siblings, 1 reply; 5+ messages in thread
From: Dmitrii Ovchinnikov @ 2023-04-18 17:55 UTC (permalink / raw)
To: FFmpeg development discussions and patches
For libx264 the default gop size is 10, while for amf the default gop size
is 250. I suspect this is the reason.
Try adding the following parameter “* -g 10* ” when using amf encoder.
This parameter will set gop size to 10.
вт, 11 апр. 2023 г. в 09:42, 罗勇刚(Yonggang Luo) <luoyonggang@gmail.com>:
> When using libx264:
> The pull result is:
> ```
> C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay -max_delay
> 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
> FFmpeg developers
> built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> configuration: --enable-gpl --enable-version3 --enable-shared
> --disable-w32threads --disable-autodetect --enable-fontconfig
> --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib
> --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
> --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
> --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
> --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> --enable-libjxl --enable-libopenjpeg --enable-libvpx
> --enable-mediafoundation --enable-libass --enable-frei0r
> --enable-libfreetype --enable-libfribidi --enable-liblensfun
> --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
> --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt
> --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
> --enable-libbs2b --enable-libflite --enable-libmysofa
> --enable-librubberband --enable-libsoxr --enable-chromaprint
> libavutil 58. 2.100 / 58. 2.100
> libavcodec 60. 3.100 / 60. 3.100
> libavformat 60. 3.100 / 60. 3.100
> libavdevice 60. 1.100 / 60. 1.100
> libavfilter 9. 3.100 / 9. 3.100
> libswscale 7. 1.100 / 7. 1.100
> libswresample 4. 10.100 / 4. 10.100
> libpostproc 57. 1.100 / 57. 1.100
> Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
> Duration: N/A, start: -0.017911, bitrate: N/A
> Stream #0:0: Video: h264 (High), yuv420p(progressive), 1920x1060, 50 fps,
> 50 tbr, 90k tbn
> 3.79 M-V: 3.731 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
> ```
>
> But when using h264_amf:
> ```
>
> C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay -max_delay
> 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
> FFmpeg developers
> built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> configuration: --enable-gpl --enable-version3 --enable-shared
> --disable-w32threads --disable-autodetect --enable-fontconfig
> --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib
> --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
> --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
> --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
> --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> --enable-libjxl --enable-libopenjpeg --enable-libvpx
> --enable-mediafoundation --enable-libass --enable-frei0r
> --enable-libfreetype --enable-libfribidi --enable-liblensfun
> --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
> --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt
> --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
> --enable-libbs2b --enable-libflite --enable-libmysofa
> --enable-librubberband --enable-libsoxr --enable-chromaprint
> libavutil 58. 2.100 / 58. 2.100
> libavcodec 60. 3.100 / 60. 3.100
> libavformat 60. 3.100 / 60. 3.100
> libavdevice 60. 1.100 / 60. 1.100
> libavfilter 9. 3.100 / 9. 3.100
> libswscale 7. 1.100 / 7. 1.100
> libswresample 4. 10.100 / 4. 10.100
> libpostproc 57. 1.100 / 57. 1.100
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> Last message repeated 1 times
> [h264 @ 000001ba7836b100] decode_slice_header error
> [h264 @ 000001ba7836b100] no frame!
> ```
>
> And if I start the ffplay pull script before the rstp push executable,
> then it can decoding the stream properly.
> ```
>
> C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay -max_delay
> 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
> FFmpeg developers
> built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> configuration: --enable-gpl --enable-version3 --enable-shared
> --disable-w32threads --disable-autodetect --enable-fontconfig
> --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib
> --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
> --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
> --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
> --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> --enable-libjxl --enable-libopenjpeg --enable-libvpx
> --enable-mediafoundation --enable-libass --enable-frei0r
> --enable-libfreetype --enable-libfribidi --enable-liblensfun
> --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
> --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt
> --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
> --enable-libbs2b --enable-libflite --enable-libmysofa
> --enable-librubberband --enable-libsoxr --enable-chromaprint
> libavutil 58. 2.100 / 58. 2.100
> libavcodec 60. 3.100 / 60. 3.100
> libavformat 60. 3.100 / 60. 3.100
> libavdevice 60. 1.100 / 60. 1.100
> libavfilter 9. 3.100 / 9. 3.100
> libswscale 7. 1.100 / 7. 1.100
> libswresample 4. 10.100 / 4. 10.100
> libpostproc 57. 1.100 / 57. 1.100
> Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
> Duration: N/A, start: -0.053911, bitrate: N/A
> Stream #0:0: Video: h264 (Main), yuv420p(tv, bt709/reserved/reserved,
> progressive), 1920x1060 [SAR 1:1 DAR 96:53], 50 fps, 50 tbr, 90k tbn
> ```
>
> Is that a bug of h264_amf or the config option for h264_amf is invalid?
>
>
>
> --
> 此致
> 礼
> 罗勇刚
> Yours
> sincerely,
> Yonggang Luo
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
>
--
Sincerely, Ovchinnikov D.A.
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [FFmpeg-devel] I have an issue when try to using h264_amf encoding rtsp stream
2023-04-18 17:55 ` Dmitrii Ovchinnikov
@ 2023-04-19 5:15 ` 罗勇刚(Yonggang Luo)
2023-04-29 7:01 ` Dmitrii Ovchinnikov
0 siblings, 1 reply; 5+ messages in thread
From: 罗勇刚(Yonggang Luo) @ 2023-04-19 5:15 UTC (permalink / raw)
To: FFmpeg development discussions and patches
thanks， I have already tried the top size 1 and 10 before on the enconder,
I assume you are talking about the encoder, as the decoder can not config
the gop size, I think it's should be a bug of and encoder or decoder,
because if I start the decoder before amf encoder, it's working fine， it is
either because the encoder only encode the first I frame properly or the
decoder can not recognize the I frame generated by amf encoder.
Dmitrii Ovchinnikov <ovchinnikov.dmitrii@gmail.com> 于 2023年4月19日周三 01:55写道：
> For libx264 the default gop size is 10, while for amf the default gop size
> is 250. I suspect this is the reason.
> Try adding the following parameter “* -g 10* ” when using amf encoder.
> This parameter will set gop size to 10.
>
> вт, 11 апр. 2023 г. в 09:42, 罗勇刚(Yonggang Luo) <luoyonggang@gmail.com>:
>
> > When using libx264:
> > The pull result is:
> > ```
> > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay
> -max_delay
> > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
> > FFmpeg developers
> > built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> > configuration: --enable-gpl --enable-version3 --enable-shared
> > --disable-w32threads --disable-autodetect --enable-fontconfig
> > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp
> --enable-bzlib
> > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> > --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
> > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
> > --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
> > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> > --enable-libjxl --enable-libopenjpeg --enable-libvpx
> > --enable-mediafoundation --enable-libass --enable-frei0r
> > --enable-libfreetype --enable-libfribidi --enable-liblensfun
> > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> > --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
> > --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt
> > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> > --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
> > --enable-libbs2b --enable-libflite --enable-libmysofa
> > --enable-librubberband --enable-libsoxr --enable-chromaprint
> > libavutil 58. 2.100 / 58. 2.100
> > libavcodec 60. 3.100 / 60. 3.100
> > libavformat 60. 3.100 / 60. 3.100
> > libavdevice 60. 1.100 / 60. 1.100
> > libavfilter 9. 3.100 / 9. 3.100
> > libswscale 7. 1.100 / 7. 1.100
> > libswresample 4. 10.100 / 4. 10.100
> > libpostproc 57. 1.100 / 57. 1.100
> > Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
> > Duration: N/A, start: -0.017911, bitrate: N/A
> > Stream #0:0: Video: h264 (High), yuv420p(progressive), 1920x1060, 50
> fps,
> > 50 tbr, 90k tbn
> > 3.79 M-V: 3.731 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
> > ```
> >
> > But when using h264_amf:
> > ```
> >
> > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay
> -max_delay
> > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
> > FFmpeg developers
> > built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> > configuration: --enable-gpl --enable-version3 --enable-shared
> > --disable-w32threads --disable-autodetect --enable-fontconfig
> > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp
> --enable-bzlib
> > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> > --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
> > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
> > --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
> > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> > --enable-libjxl --enable-libopenjpeg --enable-libvpx
> > --enable-mediafoundation --enable-libass --enable-frei0r
> > --enable-libfreetype --enable-libfribidi --enable-liblensfun
> > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> > --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
> > --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt
> > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> > --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
> > --enable-libbs2b --enable-libflite --enable-libmysofa
> > --enable-librubberband --enable-libsoxr --enable-chromaprint
> > libavutil 58. 2.100 / 58. 2.100
> > libavcodec 60. 3.100 / 60. 3.100
> > libavformat 60. 3.100 / 60. 3.100
> > libavdevice 60. 1.100 / 60. 1.100
> > libavfilter 9. 3.100 / 9. 3.100
> > libswscale 7. 1.100 / 7. 1.100
> > libswresample 4. 10.100 / 4. 10.100
> > libpostproc 57. 1.100 / 57. 1.100
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > Last message repeated 1 times
> > [h264 @ 000001ba7836b100] decode_slice_header error
> > [h264 @ 000001ba7836b100] no frame!
> > ```
> >
> > And if I start the ffplay pull script before the rstp push executable,
> > then it can decoding the stream properly.
> > ```
> >
> > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay
> -max_delay
> > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
> > FFmpeg developers
> > built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> > configuration: --enable-gpl --enable-version3 --enable-shared
> > --disable-w32threads --disable-autodetect --enable-fontconfig
> > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp
> --enable-bzlib
> > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> > --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
> > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
> > --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
> > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> > --enable-libjxl --enable-libopenjpeg --enable-libvpx
> > --enable-mediafoundation --enable-libass --enable-frei0r
> > --enable-libfreetype --enable-libfribidi --enable-liblensfun
> > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> > --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
> > --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt
> > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> > --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
> > --enable-libbs2b --enable-libflite --enable-libmysofa
> > --enable-librubberband --enable-libsoxr --enable-chromaprint
> > libavutil 58. 2.100 / 58. 2.100
> > libavcodec 60. 3.100 / 60. 3.100
> > libavformat 60. 3.100 / 60. 3.100
> > libavdevice 60. 1.100 / 60. 1.100
> > libavfilter 9. 3.100 / 9. 3.100
> > libswscale 7. 1.100 / 7. 1.100
> > libswresample 4. 10.100 / 4. 10.100
> > libpostproc 57. 1.100 / 57. 1.100
> > Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
> > Duration: N/A, start: -0.053911, bitrate: N/A
> > Stream #0:0: Video: h264 (Main), yuv420p(tv, bt709/reserved/reserved,
> > progressive), 1920x1060 [SAR 1:1 DAR 96:53], 50 fps, 50 tbr, 90k tbn
> > ```
> >
> > Is that a bug of h264_amf or the config option for h264_amf is invalid?
> >
> >
> >
> > --
> > 此致
> > 礼
> > 罗勇刚
> > Yours
> > sincerely,
> > Yonggang Luo
> > _______________________________________________
> > ffmpeg-devel mailing list
> > ffmpeg-devel@ffmpeg.org
> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> >
> > To unsubscribe, visit link above, or email
> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> >
>
>
> --
> Sincerely, Ovchinnikov D.A.
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
>
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [FFmpeg-devel] I have an issue when try to using h264_amf encoding rtsp stream
2023-04-19 5:15 ` 罗勇刚(Yonggang Luo)
@ 2023-04-29 7:01 ` Dmitrii Ovchinnikov
2023-05-02 6:43 ` 罗勇刚(Yonggang Luo)
0 siblings, 1 reply; 5+ messages in thread
From: Dmitrii Ovchinnikov @ 2023-04-29 7:01 UTC (permalink / raw)
To: FFmpeg development discussions and patches
could you also try adding one more parameter and try again?
* -header_spacing 30*it should have the same value as -g in commandline.
For example: *ffmpeg -i input.mkv -c:v h264_amf -g 30 -header_spacing 30
output.mp4*
ср, 19 апр. 2023 г. в 07:15, 罗勇刚(Yonggang Luo) <luoyonggang@gmail.com>:
> thanks， I have already tried the top size 1 and 10 before on the enconder,
> I assume you are talking about the encoder, as the decoder can not config
> the gop size, I think it's should be a bug of and encoder or decoder,
> because if I start the decoder before amf encoder, it's working fine， it is
> either because the encoder only encode the first I frame properly or the
> decoder can not recognize the I frame generated by amf encoder.
>
> Dmitrii Ovchinnikov <ovchinnikov.dmitrii@gmail.com> 于 2023年4月19日周三
> 01:55写道：
>
> > For libx264 the default gop size is 10, while for amf the default gop
> size
> > is 250. I suspect this is the reason.
> > Try adding the following parameter “* -g 10* ” when using amf encoder.
> > This parameter will set gop size to 10.
> >
> > вт, 11 апр. 2023 г. в 09:42, 罗勇刚(Yonggang Luo) <luoyonggang@gmail.com>:
> >
> > > When using libx264:
> > > The pull result is:
> > > ```
> > > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay
> > -max_delay
> > > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> > > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> > > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
> > > FFmpeg developers
> > > built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> > > configuration: --enable-gpl --enable-version3 --enable-shared
> > > --disable-w32threads --disable-autodetect --enable-fontconfig
> > > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp
> > --enable-bzlib
> > > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> > > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> > > --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
> > > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
> > > --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
> > > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> > > --enable-libjxl --enable-libopenjpeg --enable-libvpx
> > > --enable-mediafoundation --enable-libass --enable-frei0r
> > > --enable-libfreetype --enable-libfribidi --enable-liblensfun
> > > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> > > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> > > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> > > --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
> > > --enable-libcdio --enable-libgme --enable-libmodplug
> --enable-libopenmpt
> > > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> > > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> > > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> > > --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
> > > --enable-libbs2b --enable-libflite --enable-libmysofa
> > > --enable-librubberband --enable-libsoxr --enable-chromaprint
> > > libavutil 58. 2.100 / 58. 2.100
> > > libavcodec 60. 3.100 / 60. 3.100
> > > libavformat 60. 3.100 / 60. 3.100
> > > libavdevice 60. 1.100 / 60. 1.100
> > > libavfilter 9. 3.100 / 9. 3.100
> > > libswscale 7. 1.100 / 7. 1.100
> > > libswresample 4. 10.100 / 4. 10.100
> > > libpostproc 57. 1.100 / 57. 1.100
> > > Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
> > > Duration: N/A, start: -0.017911, bitrate: N/A
> > > Stream #0:0: Video: h264 (High), yuv420p(progressive), 1920x1060, 50
> > fps,
> > > 50 tbr, 90k tbn
> > > 3.79 M-V: 3.731 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
> > > ```
> > >
> > > But when using h264_amf:
> > > ```
> > >
> > > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay
> > -max_delay
> > > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> > > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> > > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
> > > FFmpeg developers
> > > built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> > > configuration: --enable-gpl --enable-version3 --enable-shared
> > > --disable-w32threads --disable-autodetect --enable-fontconfig
> > > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp
> > --enable-bzlib
> > > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> > > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> > > --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
> > > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
> > > --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
> > > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> > > --enable-libjxl --enable-libopenjpeg --enable-libvpx
> > > --enable-mediafoundation --enable-libass --enable-frei0r
> > > --enable-libfreetype --enable-libfribidi --enable-liblensfun
> > > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> > > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> > > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> > > --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
> > > --enable-libcdio --enable-libgme --enable-libmodplug
> --enable-libopenmpt
> > > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> > > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> > > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> > > --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
> > > --enable-libbs2b --enable-libflite --enable-libmysofa
> > > --enable-librubberband --enable-libsoxr --enable-chromaprint
> > > libavutil 58. 2.100 / 58. 2.100
> > > libavcodec 60. 3.100 / 60. 3.100
> > > libavformat 60. 3.100 / 60. 3.100
> > > libavdevice 60. 1.100 / 60. 1.100
> > > libavfilter 9. 3.100 / 9. 3.100
> > > libswscale 7. 1.100 / 7. 1.100
> > > libswresample 4. 10.100 / 4. 10.100
> > > libpostproc 57. 1.100 / 57. 1.100
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > Last message repeated 1 times
> > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > [h264 @ 000001ba7836b100] no frame!
> > > ```
> > >
> > > And if I start the ffplay pull script before the rstp push executable,
> > > then it can decoding the stream properly.
> > > ```
> > >
> > > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay
> > -max_delay
> > > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> > > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> > > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023 the
> > > FFmpeg developers
> > > built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> > > configuration: --enable-gpl --enable-version3 --enable-shared
> > > --disable-w32threads --disable-autodetect --enable-fontconfig
> > > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp
> > --enable-bzlib
> > > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> > > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> > > --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24
> > > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi
> > > --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264
> > > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> > > --enable-libjxl --enable-libopenjpeg --enable-libvpx
> > > --enable-mediafoundation --enable-libass --enable-frei0r
> > > --enable-libfreetype --enable-libfribidi --enable-liblensfun
> > > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> > > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> > > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> > > --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl
> > > --enable-libcdio --enable-libgme --enable-libmodplug
> --enable-libopenmpt
> > > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> > > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> > > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> > > --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa
> > > --enable-libbs2b --enable-libflite --enable-libmysofa
> > > --enable-librubberband --enable-libsoxr --enable-chromaprint
> > > libavutil 58. 2.100 / 58. 2.100
> > > libavcodec 60. 3.100 / 60. 3.100
> > > libavformat 60. 3.100 / 60. 3.100
> > > libavdevice 60. 1.100 / 60. 1.100
> > > libavfilter 9. 3.100 / 9. 3.100
> > > libswscale 7. 1.100 / 7. 1.100
> > > libswresample 4. 10.100 / 4. 10.100
> > > libpostproc 57. 1.100 / 57. 1.100
> > > Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
> > > Duration: N/A, start: -0.053911, bitrate: N/A
> > > Stream #0:0: Video: h264 (Main), yuv420p(tv, bt709/reserved/reserved,
> > > progressive), 1920x1060 [SAR 1:1 DAR 96:53], 50 fps, 50 tbr, 90k tbn
> > > ```
> > >
> > > Is that a bug of h264_amf or the config option for h264_amf is
> invalid?
> > >
> > >
> > >
> > > --
> > > 此致
> > > 礼
> > > 罗勇刚
> > > Yours
> > > sincerely,
> > > Yonggang Luo
> > > _______________________________________________
> > > ffmpeg-devel mailing list
> > > ffmpeg-devel@ffmpeg.org
> > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> > >
> > > To unsubscribe, visit link above, or email
> > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> > >
> >
> >
> > --
> > Sincerely, Ovchinnikov D.A.
> > _______________________________________________
> > ffmpeg-devel mailing list
> > ffmpeg-devel@ffmpeg.org
> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> >
> > To unsubscribe, visit link above, or email
> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> >
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
>
--
Sincerely, Ovchinnikov D.A.
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [FFmpeg-devel] I have an issue when try to using h264_amf encoding rtsp stream
2023-04-29 7:01 ` Dmitrii Ovchinnikov
@ 2023-05-02 6:43 ` 罗勇刚(Yonggang Luo)
0 siblings, 0 replies; 5+ messages in thread
From: 罗勇刚(Yonggang Luo) @ 2023-05-02 6:43 UTC (permalink / raw)
To: FFmpeg development discussions and patches
Thanks, that's working!
On Sat, Apr 29, 2023 at 3:02 PM Dmitrii Ovchinnikov <
ovchinnikov.dmitrii@gmail.com> wrote:
>
> could you also try adding one more parameter and try again?
>
> * -header_spacing 30*it should have the same value as -g in commandline.
> For example: *ffmpeg -i input.mkv -c:v h264_amf -g 30 -header_spacing
30
> output.mp4*
>
> ср, 19 апр. 2023 г. в 07:15, 罗勇刚(Yonggang Luo) <luoyonggang@gmail.com>:
>
> > thanks， I have already tried the top size 1 and 10 before on the
enconder,
> > I assume you are talking about the encoder, as the decoder can not
config
> > the gop size, I think it's should be a bug of and encoder or decoder,
> > because if I start the decoder before amf encoder, it's working fine，
it is
> > either because the encoder only encode the first I frame properly or the
> > decoder can not recognize the I frame generated by amf encoder.
> >
> > Dmitrii Ovchinnikov <ovchinnikov.dmitrii@gmail.com> 于 2023年4月19日周三
> > 01:55写道：
> >
> > > For libx264 the default gop size is 10, while for amf the default gop
> > size
> > > is 250. I suspect this is the reason.
> > > Try adding the following parameter “* -g 10* ” when using amf
encoder.
> > > This parameter will set gop size to 10.
> > >
> > > вт, 11 апр. 2023 г. в 09:42, 罗勇刚(Yonggang Luo) <luoyonggang@gmail.com
>:
> > >
> > > > When using libx264:
> > > > The pull result is:
> > > > ```
> > > > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay
> > > -max_delay
> > > > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> > > > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> > > > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023
the
> > > > FFmpeg developers
> > > > built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> > > > configuration: --enable-gpl --enable-version3 --enable-shared
> > > > --disable-w32threads --disable-autodetect --enable-fontconfig
> > > > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp
> > > --enable-bzlib
> > > > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> > > > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> > > > --enable-libbluray --enable-libcaca --enable-sdl2
--enable-libaribb24
> > > > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d
--enable-libzvbi
> > > > --enable-librav1e --enable-libsvtav1 --enable-libwebp
--enable-libx264
> > > > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> > > > --enable-libjxl --enable-libopenjpeg --enable-libvpx
> > > > --enable-mediafoundation --enable-libass --enable-frei0r
> > > > --enable-libfreetype --enable-libfribidi --enable-liblensfun
> > > > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> > > > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> > > > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> > > > --enable-libshaderc --enable-vulkan --enable-libplacebo
--enable-opencl
> > > > --enable-libcdio --enable-libgme --enable-libmodplug
> > --enable-libopenmpt
> > > > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> > > > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> > > > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> > > > --enable-libopus --enable-libspeex --enable-libvorbis
--enable-ladspa
> > > > --enable-libbs2b --enable-libflite --enable-libmysofa
> > > > --enable-librubberband --enable-libsoxr --enable-chromaprint
> > > > libavutil 58. 2.100 / 58. 2.100
> > > > libavcodec 60. 3.100 / 60. 3.100
> > > > libavformat 60. 3.100 / 60. 3.100
> > > > libavdevice 60. 1.100 / 60. 1.100
> > > > libavfilter 9. 3.100 / 9. 3.100
> > > > libswscale 7. 1.100 / 7. 1.100
> > > > libswresample 4. 10.100 / 4. 10.100
> > > > libpostproc 57. 1.100 / 57. 1.100
> > > > Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
> > > > Duration: N/A, start: -0.017911, bitrate: N/A
> > > > Stream #0:0: Video: h264 (High), yuv420p(progressive), 1920x1060,
50
> > > fps,
> > > > 50 tbr, 90k tbn
> > > > 3.79 M-V: 3.731 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
> > > > ```
> > > >
> > > > But when using h264_amf:
> > > > ```
> > > >
> > > > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay
> > > -max_delay
> > > > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> > > > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> > > > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023
the
> > > > FFmpeg developers
> > > > built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> > > > configuration: --enable-gpl --enable-version3 --enable-shared
> > > > --disable-w32threads --disable-autodetect --enable-fontconfig
> > > > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp
> > > --enable-bzlib
> > > > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> > > > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> > > > --enable-libbluray --enable-libcaca --enable-sdl2
--enable-libaribb24
> > > > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d
--enable-libzvbi
> > > > --enable-librav1e --enable-libsvtav1 --enable-libwebp
--enable-libx264
> > > > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> > > > --enable-libjxl --enable-libopenjpeg --enable-libvpx
> > > > --enable-mediafoundation --enable-libass --enable-frei0r
> > > > --enable-libfreetype --enable-libfribidi --enable-liblensfun
> > > > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> > > > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> > > > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> > > > --enable-libshaderc --enable-vulkan --enable-libplacebo
--enable-opencl
> > > > --enable-libcdio --enable-libgme --enable-libmodplug
> > --enable-libopenmpt
> > > > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> > > > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> > > > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> > > > --enable-libopus --enable-libspeex --enable-libvorbis
--enable-ladspa
> > > > --enable-libbs2b --enable-libflite --enable-libmysofa
> > > > --enable-librubberband --enable-libsoxr --enable-chromaprint
> > > > libavutil 58. 2.100 / 58. 2.100
> > > > libavcodec 60. 3.100 / 60. 3.100
> > > > libavformat 60. 3.100 / 60. 3.100
> > > > libavdevice 60. 1.100 / 60. 1.100
> > > > libavfilter 9. 3.100 / 9. 3.100
> > > > libswscale 7. 1.100 / 7. 1.100
> > > > libswresample 4. 10.100 / 4. 10.100
> > > > libpostproc 57. 1.100 / 57. 1.100
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header errorq= 0B f=0/0
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > [h264 @ 000001ba7836b100] non-existing PPS 0 referenced 0B f=0/0
> > > > Last message repeated 1 times
> > > > [h264 @ 000001ba7836b100] decode_slice_header error
> > > > [h264 @ 000001ba7836b100] no frame!
> > > > ```
> > > >
> > > > And if I start the ffplay pull script before the rstp push
executable,
> > > > then it can decoding the stream properly.
> > > > ```
> > > >
> > > > C:\work\xtal\xtal-video\ffmpeg-6.0-full_build-shared\bin>ffplay
> > > -max_delay
> > > > 0 -max_probe_packets 1 -analyzeduration 0 -flags +low_delay -fflags
> > > > +nobuffer -protocol_whitelist file,udp,rtp rtp_h264_30003.sdp
> > > > ffplay version 6.0-full_build-www.gyan.dev Copyright (c) 2003-2023
the
> > > > FFmpeg developers
> > > > built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
> > > > configuration: --enable-gpl --enable-version3 --enable-shared
> > > > --disable-w32threads --disable-autodetect --enable-fontconfig
> > > > --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp
> > > --enable-bzlib
> > > > --enable-lzma --enable-libsnappy --enable-zlib --enable-librist
> > > > --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth
> > > > --enable-libbluray --enable-libcaca --enable-sdl2
--enable-libaribb24
> > > > --enable-libdav1d --enable-libdavs2 --enable-libuavs3d
--enable-libzvbi
> > > > --enable-librav1e --enable-libsvtav1 --enable-libwebp
--enable-libx264
> > > > --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom
> > > > --enable-libjxl --enable-libopenjpeg --enable-libvpx
> > > > --enable-mediafoundation --enable-libass --enable-frei0r
> > > > --enable-libfreetype --enable-libfribidi --enable-liblensfun
> > > > --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf
> > > > --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec
> > > > --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl
> > > > --enable-libshaderc --enable-vulkan --enable-libplacebo
--enable-opencl
> > > > --enable-libcdio --enable-libgme --enable-libmodplug
> > --enable-libopenmpt
> > > > --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine
> > > > --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc
> > > > --enable-libilbc --enable-libgsm --enable-libopencore-amrnb
> > > > --enable-libopus --enable-libspeex --enable-libvorbis
--enable-ladspa
> > > > --enable-libbs2b --enable-libflite --enable-libmysofa
> > > > --enable-librubberband --enable-libsoxr --enable-chromaprint
> > > > libavutil 58. 2.100 / 58. 2.100
> > > > libavcodec 60. 3.100 / 60. 3.100
> > > > libavformat 60. 3.100 / 60. 3.100
> > > > libavdevice 60. 1.100 / 60. 1.100
> > > > libavfilter 9. 3.100 / 9. 3.100
> > > > libswscale 7. 1.100 / 7. 1.100
> > > > libswresample 4. 10.100 / 4. 10.100
> > > > libpostproc 57. 1.100 / 57. 1.100
> > > > Input #0, sdp, from 'rtp_h264_30003.sdp':= 0KB sq= 0B f=0/0
> > > > Duration: N/A, start: -0.053911, bitrate: N/A
> > > > Stream #0:0: Video: h264 (Main), yuv420p(tv,
bt709/reserved/reserved,
> > > > progressive), 1920x1060 [SAR 1:1 DAR 96:53], 50 fps, 50 tbr, 90k tbn
> > > > ```
> > > >
> > > > Is that a bug of h264_amf or the config option for h264_amf is
> > invalid?
> > > >
> > > >
> > > >
> > > > --
> > > > 此致
> > > > 礼
> > > > 罗勇刚
> > > > Yours
> > > > sincerely,
> > > > Yonggang Luo
> > > > _______________________________________________
> > > > ffmpeg-devel mailing list
> > > > ffmpeg-devel@ffmpeg.org
> > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> > > >
> > > > To unsubscribe, visit link above, or email
> > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> > > >
> > >
> > >
> > > --
> > > Sincerely, Ovchinnikov D.A.
> > > _______________________________________________
> > > ffmpeg-devel mailing list
> > > ffmpeg-devel@ffmpeg.org
> > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> > >
> > > To unsubscribe, visit link above, or email
> > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> > >
> > _______________________________________________
> > ffmpeg-devel mailing list
> > ffmpeg-devel@ffmpeg.org
> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
> >
> > To unsubscribe, visit link above, or email
> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
> >
>
>
> --
> Sincerely, Ovchinnikov D.A.
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
--
此致
礼
罗勇刚
Yours
sincerely,
Yonggang Luo
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-05-02 6:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-04-11 7:41 [FFmpeg-devel] I have an issue when try to using h264_amf encoding rtsp stream 罗勇刚(Yonggang Luo)
2023-04-18 17:55 ` Dmitrii Ovchinnikov
2023-04-19 5:15 ` 罗勇刚(Yonggang Luo)
2023-04-29 7:01 ` Dmitrii Ovchinnikov
2023-05-02 6:43 ` 罗勇刚(Yonggang Luo)
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git