* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early [not found] <20220224203039.CD4BB41059B@natalya.videolan.org> @ 2022-02-24 21:11 ` Thierry Foucu 2022-02-24 21:29 ` Paul B Mahol 0 siblings, 1 reply; 11+ messages in thread From: Thierry Foucu @ 2022-02-24 21:11 UTC (permalink / raw) To: FFmpeg development discussions and patches Cc: FFmpeg git commit log and discussion On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol <git@videolan.org> wrote: > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> | Thu Feb 24 > 20:32:41 2022 +0100| [3715f2f8643695940582ce040b7a052cccfb9db2] | > committer: Paul B Mahol > > avfilter/vf_tpad: if there is no frame to clone return early > > > > http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 > --- > > libavfilter/vf_tpad.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > index e5acece1e4..120dbcb4d3 100644 > --- a/libavfilter/vf_tpad.c > +++ b/libavfilter/vf_tpad.c > @@ -148,6 +148,11 @@ static int activate(AVFilterContext *ctx) > frame->data, frame->linesize, > 0, 0, frame->width, frame->height); > } else if (s->stop_mode == 1) { > + if (!s->cache_stop) { > + s->pad_stop = 0; > + ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); > + return 0; > + } > frame = av_frame_clone(s->cache_stop); > if (!frame) > return AVERROR(ENOMEM); > > The problem with this solution is that the tpad will then not do what we are expecting, which is padding video track, and the output file will not have the desired duration. Will it not be better to just output black frame (aka stop_mode == 0) , something like that? iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c index e5acece1e4..5e4062e9f2 100644 --- a/libavfilter/vf_tpad.c +++ b/libavfilter/vf_tpad.c @@ -140,7 +140,7 @@ static int activate(AVFilterContext *ctx) ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); return 0; } - if (s->stop_mode == 0) { + if (s->stop_mode == 0 || !s->cache_stop) { frame = ff_get_video_buffer(outlink, outlink->w, outlink->h); if (!frame) return AVERROR(ENOMEM); > _______________________________________________ > ffmpeg-cvslog mailing list > ffmpeg-cvslog@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog > > To unsubscribe, visit link above, or email > ffmpeg-cvslog-request@ffmpeg.org with subject "unsubscribe". > -- Thierry Foucu _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-24 21:11 ` [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early Thierry Foucu @ 2022-02-24 21:29 ` Paul B Mahol 2022-02-24 21:35 ` Thierry Foucu 0 siblings, 1 reply; 11+ messages in thread From: Paul B Mahol @ 2022-02-24 21:29 UTC (permalink / raw) To: FFmpeg development discussions and patches Cc: FFmpeg git commit log and discussion On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu <tfoucu@gmail.com> wrote: > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol <git@videolan.org> wrote: > > > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> | Thu Feb 24 > > 20:32:41 2022 +0100| [3715f2f8643695940582ce040b7a052cccfb9db2] | > > committer: Paul B Mahol > > > > avfilter/vf_tpad: if there is no frame to clone return early > > > > > > > > http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 > > --- > > > > libavfilter/vf_tpad.c | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > index e5acece1e4..120dbcb4d3 100644 > > --- a/libavfilter/vf_tpad.c > > +++ b/libavfilter/vf_tpad.c > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext *ctx) > > frame->data, frame->linesize, > > 0, 0, frame->width, frame->height); > > } else if (s->stop_mode == 1) { > > + if (!s->cache_stop) { > > + s->pad_stop = 0; > > + ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); > > + return 0; > > + } > > frame = av_frame_clone(s->cache_stop); > > if (!frame) > > return AVERROR(ENOMEM); > > > > > The problem with this solution is that the tpad will then not do what we > are expecting, which is padding video track, and the output file will not > have the desired duration. > Will it not be better to just output black frame (aka stop_mode == 0) , > something like that? > I doubt that, clone is clone, there is no point in padding stream that have no frames at all. > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > index e5acece1e4..5e4062e9f2 100644 > --- a/libavfilter/vf_tpad.c > +++ b/libavfilter/vf_tpad.c > @@ -140,7 +140,7 @@ static int activate(AVFilterContext *ctx) > ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); > return 0; > } > - if (s->stop_mode == 0) { > + if (s->stop_mode == 0 || !s->cache_stop) { > frame = ff_get_video_buffer(outlink, outlink->w, outlink->h); > if (!frame) > return AVERROR(ENOMEM); > > > > > > _______________________________________________ > > ffmpeg-cvslog mailing list > > ffmpeg-cvslog@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog > > > > To unsubscribe, visit link above, or email > > ffmpeg-cvslog-request@ffmpeg.org with subject "unsubscribe". > > > > > -- > > Thierry Foucu > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-24 21:29 ` Paul B Mahol @ 2022-02-24 21:35 ` Thierry Foucu 2022-02-24 21:51 ` Paul B Mahol 0 siblings, 1 reply; 11+ messages in thread From: Thierry Foucu @ 2022-02-24 21:35 UTC (permalink / raw) To: FFmpeg development discussions and patches Cc: FFmpeg git commit log and discussion On Thu, Feb 24, 2022 at 1:28 PM Paul B Mahol <onemda@gmail.com> wrote: > On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu <tfoucu@gmail.com> wrote: > > > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol <git@videolan.org> wrote: > > > > > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> | Thu Feb 24 > > > 20:32:41 2022 +0100| [3715f2f8643695940582ce040b7a052cccfb9db2] | > > > committer: Paul B Mahol > > > > > > avfilter/vf_tpad: if there is no frame to clone return early > > > > > > > > > > > > > http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 > > > --- > > > > > > libavfilter/vf_tpad.c | 5 +++++ > > > 1 file changed, 5 insertions(+) > > > > > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > > index e5acece1e4..120dbcb4d3 100644 > > > --- a/libavfilter/vf_tpad.c > > > +++ b/libavfilter/vf_tpad.c > > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext *ctx) > > > frame->data, frame->linesize, > > > 0, 0, frame->width, frame->height); > > > } else if (s->stop_mode == 1) { > > > + if (!s->cache_stop) { > > > + s->pad_stop = 0; > > > + ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); > > > + return 0; > > > + } > > > frame = av_frame_clone(s->cache_stop); > > > if (!frame) > > > return AVERROR(ENOMEM); > > > > > > > > The problem with this solution is that the tpad will then not do what we > > are expecting, which is padding video track, and the output file will not > > have the desired duration. > > Will it not be better to just output black frame (aka stop_mode == 0) , > > something like that? > > > > I doubt that, clone is clone, there is no point in padding stream that have > no frames at all. > > > The sample I forwarded to JB has video frames. The problem was that there was a re-init of the filter chain after a resolution change and after the re-init, there were no frames but got frames before the re-init. I will understand for a media file which has NEVER received a video frame and in this case, this is the correct solution. > > > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > index e5acece1e4..5e4062e9f2 100644 > > --- a/libavfilter/vf_tpad.c > > +++ b/libavfilter/vf_tpad.c > > @@ -140,7 +140,7 @@ static int activate(AVFilterContext *ctx) > > ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); > > return 0; > > } > > - if (s->stop_mode == 0) { > > + if (s->stop_mode == 0 || !s->cache_stop) { > > frame = ff_get_video_buffer(outlink, outlink->w, > outlink->h); > > if (!frame) > > return AVERROR(ENOMEM); > > > > > > > > > > > _______________________________________________ > > > ffmpeg-cvslog mailing list > > > ffmpeg-cvslog@ffmpeg.org > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog > > > > > > To unsubscribe, visit link above, or email > > > ffmpeg-cvslog-request@ffmpeg.org with subject "unsubscribe". > > > > > > > > > -- > > > > Thierry Foucu > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > -- Thierry Foucu _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-24 21:35 ` Thierry Foucu @ 2022-02-24 21:51 ` Paul B Mahol 2022-02-24 22:19 ` Thierry Foucu 0 siblings, 1 reply; 11+ messages in thread From: Paul B Mahol @ 2022-02-24 21:51 UTC (permalink / raw) To: FFmpeg development discussions and patches Cc: FFmpeg git commit log and discussion On Thu, Feb 24, 2022 at 10:36 PM Thierry Foucu <tfoucu@gmail.com> wrote: > On Thu, Feb 24, 2022 at 1:28 PM Paul B Mahol <onemda@gmail.com> wrote: > > > On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu <tfoucu@gmail.com> wrote: > > > > > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol <git@videolan.org> > wrote: > > > > > > > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> | Thu Feb > 24 > > > > 20:32:41 2022 +0100| [3715f2f8643695940582ce040b7a052cccfb9db2] | > > > > committer: Paul B Mahol > > > > > > > > avfilter/vf_tpad: if there is no frame to clone return early > > > > > > > > > > > > > > > > > > > http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 > > > > --- > > > > > > > > libavfilter/vf_tpad.c | 5 +++++ > > > > 1 file changed, 5 insertions(+) > > > > > > > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > > > index e5acece1e4..120dbcb4d3 100644 > > > > --- a/libavfilter/vf_tpad.c > > > > +++ b/libavfilter/vf_tpad.c > > > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext *ctx) > > > > frame->data, frame->linesize, > > > > 0, 0, frame->width, frame->height); > > > > } else if (s->stop_mode == 1) { > > > > + if (!s->cache_stop) { > > > > + s->pad_stop = 0; > > > > + ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); > > > > + return 0; > > > > + } > > > > frame = av_frame_clone(s->cache_stop); > > > > if (!frame) > > > > return AVERROR(ENOMEM); > > > > > > > > > > > The problem with this solution is that the tpad will then not do what > we > > > are expecting, which is padding video track, and the output file will > not > > > have the desired duration. > > > Will it not be better to just output black frame (aka stop_mode == 0) , > > > something like that? > > > > > > > I doubt that, clone is clone, there is no point in padding stream that > have > > no frames at all. > > > > > > > The sample I forwarded to JB has video frames. The problem was that there > was a re-init of the filter chain after a resolution change and after the > re-init, there were no frames but got frames before the re-init. > I will understand for a media file which has NEVER received a video frame > and in this case, this is the correct solution. > Hmm, so you encode output with resolution change, why not use scale filter as first filter and then no resolution ever change for rest of graph? Adding support for resolution changes to all filters is very time consuming task and I see no real benefit in doing that now. > > > > > > > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > > index e5acece1e4..5e4062e9f2 100644 > > > --- a/libavfilter/vf_tpad.c > > > +++ b/libavfilter/vf_tpad.c > > > @@ -140,7 +140,7 @@ static int activate(AVFilterContext *ctx) > > > ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); > > > return 0; > > > } > > > - if (s->stop_mode == 0) { > > > + if (s->stop_mode == 0 || !s->cache_stop) { > > > frame = ff_get_video_buffer(outlink, outlink->w, > > outlink->h); > > > if (!frame) > > > return AVERROR(ENOMEM); > > > > > > > > > > > > > > > > _______________________________________________ > > > > ffmpeg-cvslog mailing list > > > > ffmpeg-cvslog@ffmpeg.org > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog > > > > > > > > To unsubscribe, visit link above, or email > > > > ffmpeg-cvslog-request@ffmpeg.org with subject "unsubscribe". > > > > > > > > > > > > > -- > > > > > > Thierry Foucu > > > _______________________________________________ > > > ffmpeg-devel mailing list > > > ffmpeg-devel@ffmpeg.org > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > To unsubscribe, visit link above, or email > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > -- > > Thierry Foucu > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-24 21:51 ` Paul B Mahol @ 2022-02-24 22:19 ` Thierry Foucu 2022-02-24 22:20 ` Thierry Foucu 0 siblings, 1 reply; 11+ messages in thread From: Thierry Foucu @ 2022-02-24 22:19 UTC (permalink / raw) To: FFmpeg development discussions and patches Cc: FFmpeg git commit log and discussion On Thu, Feb 24, 2022 at 1:50 PM Paul B Mahol <onemda@gmail.com> wrote: > On Thu, Feb 24, 2022 at 10:36 PM Thierry Foucu <tfoucu@gmail.com> wrote: > > > On Thu, Feb 24, 2022 at 1:28 PM Paul B Mahol <onemda@gmail.com> wrote: > > > > > On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu <tfoucu@gmail.com> > wrote: > > > > > > > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol <git@videolan.org> > > wrote: > > > > > > > > > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> | Thu > Feb > > 24 > > > > > 20:32:41 2022 +0100| [3715f2f8643695940582ce040b7a052cccfb9db2] | > > > > > committer: Paul B Mahol > > > > > > > > > > avfilter/vf_tpad: if there is no frame to clone return early > > > > > > > > > > > > > > > > > > > > > > > > > > http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 > > > > > --- > > > > > > > > > > libavfilter/vf_tpad.c | 5 +++++ > > > > > 1 file changed, 5 insertions(+) > > > > > > > > > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > > > > index e5acece1e4..120dbcb4d3 100644 > > > > > --- a/libavfilter/vf_tpad.c > > > > > +++ b/libavfilter/vf_tpad.c > > > > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext *ctx) > > > > > frame->data, frame->linesize, > > > > > 0, 0, frame->width, frame->height); > > > > > } else if (s->stop_mode == 1) { > > > > > + if (!s->cache_stop) { > > > > > + s->pad_stop = 0; > > > > > + ff_outlink_set_status(outlink, AVERROR_EOF, > s->pts); > > > > > + return 0; > > > > > + } > > > > > frame = av_frame_clone(s->cache_stop); > > > > > if (!frame) > > > > > return AVERROR(ENOMEM); > > > > > > > > > > > > > > The problem with this solution is that the tpad will then not do what > > we > > > > are expecting, which is padding video track, and the output file will > > not > > > > have the desired duration. > > > > Will it not be better to just output black frame (aka stop_mode == > 0) , > > > > something like that? > > > > > > > > > > I doubt that, clone is clone, there is no point in padding stream that > > have > > > no frames at all. > > > > > > > > > > > The sample I forwarded to JB has video frames. The problem was that there > > was a re-init of the filter chain after a resolution change and after the > > re-init, there were no frames but got frames before the re-init. > > I will understand for a media file which has NEVER received a video frame > > and in this case, this is the correct solution. > > > > Hmm, so you encode output with resolution change, why not use scale filter > as first filter and then no resolution ever change for rest of graph? > Adding support for resolution changes to all filters is very time consuming > task and I see no real benefit in doing that now. > We do have the scale filter in front of the tpad filter. Here is the filter chain we are using idet=1.04:1.5,yadif=0:-1:1,scale=+528:+864:flags=bicubic,setsar=1,fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms And it does crash. Even just fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms reproduce the problem. > > > > > > > > > > > > > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > > > index e5acece1e4..5e4062e9f2 100644 > > > > --- a/libavfilter/vf_tpad.c > > > > +++ b/libavfilter/vf_tpad.c > > > > @@ -140,7 +140,7 @@ static int activate(AVFilterContext *ctx) > > > > ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); > > > > return 0; > > > > } > > > > - if (s->stop_mode == 0) { > > > > + if (s->stop_mode == 0 || !s->cache_stop) { > > > > frame = ff_get_video_buffer(outlink, outlink->w, > > > outlink->h); > > > > if (!frame) > > > > return AVERROR(ENOMEM); > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > ffmpeg-cvslog mailing list > > > > > ffmpeg-cvslog@ffmpeg.org > > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog > > > > > > > > > > To unsubscribe, visit link above, or email > > > > > ffmpeg-cvslog-request@ffmpeg.org with subject "unsubscribe". > > > > > > > > > > > > > > > > > -- > > > > > > > > Thierry Foucu > > > > _______________________________________________ > > > > ffmpeg-devel mailing list > > > > ffmpeg-devel@ffmpeg.org > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > > > To unsubscribe, visit link above, or email > > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > > > _______________________________________________ > > > ffmpeg-devel mailing list > > > ffmpeg-devel@ffmpeg.org > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > To unsubscribe, visit link above, or email > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > > > > > -- > > > > Thierry Foucu > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > -- Thierry Foucu _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-24 22:19 ` Thierry Foucu @ 2022-02-24 22:20 ` Thierry Foucu 2022-02-25 7:51 ` Paul B Mahol 0 siblings, 1 reply; 11+ messages in thread From: Thierry Foucu @ 2022-02-24 22:20 UTC (permalink / raw) To: FFmpeg development discussions and patches Cc: FFmpeg git commit log and discussion On Thu, Feb 24, 2022 at 2:19 PM Thierry Foucu <tfoucu@gmail.com> wrote: > > > On Thu, Feb 24, 2022 at 1:50 PM Paul B Mahol <onemda@gmail.com> wrote: > >> On Thu, Feb 24, 2022 at 10:36 PM Thierry Foucu <tfoucu@gmail.com> wrote: >> >> > On Thu, Feb 24, 2022 at 1:28 PM Paul B Mahol <onemda@gmail.com> wrote: >> > >> > > On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu <tfoucu@gmail.com> >> wrote: >> > > >> > > > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol <git@videolan.org> >> > wrote: >> > > > >> > > > > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> | Thu >> Feb >> > 24 >> > > > > 20:32:41 2022 +0100| [3715f2f8643695940582ce040b7a052cccfb9db2] | >> > > > > committer: Paul B Mahol >> > > > > >> > > > > avfilter/vf_tpad: if there is no frame to clone return early >> > > > > >> > > > > > >> > > > > >> > > > >> > > >> > >> http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 >> > > > > --- >> > > > > >> > > > > libavfilter/vf_tpad.c | 5 +++++ >> > > > > 1 file changed, 5 insertions(+) >> > > > > >> > > > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c >> > > > > index e5acece1e4..120dbcb4d3 100644 >> > > > > --- a/libavfilter/vf_tpad.c >> > > > > +++ b/libavfilter/vf_tpad.c >> > > > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext *ctx) >> > > > > frame->data, frame->linesize, >> > > > > 0, 0, frame->width, frame->height); >> > > > > } else if (s->stop_mode == 1) { >> > > > > + if (!s->cache_stop) { >> > > > > + s->pad_stop = 0; >> > > > > + ff_outlink_set_status(outlink, AVERROR_EOF, >> s->pts); >> > > > > + return 0; >> > > > > + } >> > > > > frame = av_frame_clone(s->cache_stop); >> > > > > if (!frame) >> > > > > return AVERROR(ENOMEM); >> > > > > >> > > > > >> > > > The problem with this solution is that the tpad will then not do >> what >> > we >> > > > are expecting, which is padding video track, and the output file >> will >> > not >> > > > have the desired duration. >> > > > Will it not be better to just output black frame (aka stop_mode == >> 0) , >> > > > something like that? >> > > > >> > > >> > > I doubt that, clone is clone, there is no point in padding stream that >> > have >> > > no frames at all. >> > > >> > > >> > > >> > The sample I forwarded to JB has video frames. The problem was that >> there >> > was a re-init of the filter chain after a resolution change and after >> the >> > re-init, there were no frames but got frames before the re-init. >> > I will understand for a media file which has NEVER received a video >> frame >> > and in this case, this is the correct solution. >> > >> >> Hmm, so you encode output with resolution change, why not use scale filter >> as first filter and then no resolution ever change for rest of graph? >> Adding support for resolution changes to all filters is very time >> consuming >> task and I see no real benefit in doing that now. >> > > We do have the scale filter in front of the tpad filter. Here is the > filter chain we are using > > idet=1.04:1.5,yadif=0:-1:1,scale=+528:+864:flags=bicubic,setsar=1,fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > > And it does crash. > > Even just fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > reproduce the problem. > Maybe an option to the tpad filter to decide what should be the output when the stop_mode == 1 and cache_stop is NULL? So, in some cases, people may want a color frame, and some other will just want to exit right away? > > >> >> >> > >> > >> > > > >> > > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c >> > > > index e5acece1e4..5e4062e9f2 100644 >> > > > --- a/libavfilter/vf_tpad.c >> > > > +++ b/libavfilter/vf_tpad.c >> > > > @@ -140,7 +140,7 @@ static int activate(AVFilterContext *ctx) >> > > > ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); >> > > > return 0; >> > > > } >> > > > - if (s->stop_mode == 0) { >> > > > + if (s->stop_mode == 0 || !s->cache_stop) { >> > > > frame = ff_get_video_buffer(outlink, outlink->w, >> > > outlink->h); >> > > > if (!frame) >> > > > return AVERROR(ENOMEM); >> > > > >> > > > >> > > > >> > > > >> > > > > _______________________________________________ >> > > > > ffmpeg-cvslog mailing list >> > > > > ffmpeg-cvslog@ffmpeg.org >> > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog >> > > > > >> > > > > To unsubscribe, visit link above, or email >> > > > > ffmpeg-cvslog-request@ffmpeg.org with subject "unsubscribe". >> > > > > >> > > > >> > > > >> > > > -- >> > > > >> > > > Thierry Foucu >> > > > _______________________________________________ >> > > > ffmpeg-devel mailing list >> > > > ffmpeg-devel@ffmpeg.org >> > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > > > >> > > > To unsubscribe, visit link above, or email >> > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > > > >> > > _______________________________________________ >> > > ffmpeg-devel mailing list >> > > ffmpeg-devel@ffmpeg.org >> > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > > >> > > To unsubscribe, visit link above, or email >> > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > > >> > >> > >> > -- >> > >> > Thierry Foucu >> > _______________________________________________ >> > ffmpeg-devel mailing list >> > ffmpeg-devel@ffmpeg.org >> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > >> > To unsubscribe, visit link above, or email >> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > >> _______________________________________________ >> ffmpeg-devel mailing list >> ffmpeg-devel@ffmpeg.org >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> >> To unsubscribe, visit link above, or email >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > > > -- > > Thierry Foucu > -- Thierry Foucu _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-24 22:20 ` Thierry Foucu @ 2022-02-25 7:51 ` Paul B Mahol 2022-02-25 21:07 ` Thierry Foucu 0 siblings, 1 reply; 11+ messages in thread From: Paul B Mahol @ 2022-02-25 7:51 UTC (permalink / raw) To: FFmpeg development discussions and patches Cc: FFmpeg git commit log and discussion On Thu, Feb 24, 2022 at 11:21 PM Thierry Foucu <tfoucu@gmail.com> wrote: > On Thu, Feb 24, 2022 at 2:19 PM Thierry Foucu <tfoucu@gmail.com> wrote: > > > > > > > On Thu, Feb 24, 2022 at 1:50 PM Paul B Mahol <onemda@gmail.com> wrote: > > > >> On Thu, Feb 24, 2022 at 10:36 PM Thierry Foucu <tfoucu@gmail.com> > wrote: > >> > >> > On Thu, Feb 24, 2022 at 1:28 PM Paul B Mahol <onemda@gmail.com> > wrote: > >> > > >> > > On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu <tfoucu@gmail.com> > >> wrote: > >> > > > >> > > > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol <git@videolan.org> > >> > wrote: > >> > > > > >> > > > > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> | Thu > >> Feb > >> > 24 > >> > > > > 20:32:41 2022 +0100| [3715f2f8643695940582ce040b7a052cccfb9db2] > | > >> > > > > committer: Paul B Mahol > >> > > > > > >> > > > > avfilter/vf_tpad: if there is no frame to clone return early > >> > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > >> > http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 > >> > > > > --- > >> > > > > > >> > > > > libavfilter/vf_tpad.c | 5 +++++ > >> > > > > 1 file changed, 5 insertions(+) > >> > > > > > >> > > > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > >> > > > > index e5acece1e4..120dbcb4d3 100644 > >> > > > > --- a/libavfilter/vf_tpad.c > >> > > > > +++ b/libavfilter/vf_tpad.c > >> > > > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext *ctx) > >> > > > > frame->data, frame->linesize, > >> > > > > 0, 0, frame->width, > frame->height); > >> > > > > } else if (s->stop_mode == 1) { > >> > > > > + if (!s->cache_stop) { > >> > > > > + s->pad_stop = 0; > >> > > > > + ff_outlink_set_status(outlink, AVERROR_EOF, > >> s->pts); > >> > > > > + return 0; > >> > > > > + } > >> > > > > frame = av_frame_clone(s->cache_stop); > >> > > > > if (!frame) > >> > > > > return AVERROR(ENOMEM); > >> > > > > > >> > > > > > >> > > > The problem with this solution is that the tpad will then not do > >> what > >> > we > >> > > > are expecting, which is padding video track, and the output file > >> will > >> > not > >> > > > have the desired duration. > >> > > > Will it not be better to just output black frame (aka stop_mode == > >> 0) , > >> > > > something like that? > >> > > > > >> > > > >> > > I doubt that, clone is clone, there is no point in padding stream > that > >> > have > >> > > no frames at all. > >> > > > >> > > > >> > > > >> > The sample I forwarded to JB has video frames. The problem was that > >> there > >> > was a re-init of the filter chain after a resolution change and after > >> the > >> > re-init, there were no frames but got frames before the re-init. > >> > I will understand for a media file which has NEVER received a video > >> frame > >> > and in this case, this is the correct solution. > >> > > >> > >> Hmm, so you encode output with resolution change, why not use scale > filter > >> as first filter and then no resolution ever change for rest of graph? > >> Adding support for resolution changes to all filters is very time > >> consuming > >> task and I see no real benefit in doing that now. > >> > > > > We do have the scale filter in front of the tpad filter. Here is the > > filter chain we are using > > > > > idet=1.04:1.5,yadif=0:-1:1,scale=+528:+864:flags=bicubic,setsar=1,fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > > > Is this just increasing size instead of setting constant one? > > And it does crash. > > > > Even just fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > > reproduce the problem. > > > > Maybe an option to the tpad filter to decide what should be the output when > the stop_mode == 1 and cache_stop is NULL? > So, in some cases, people may want a color frame, and some other will just > want to exit right away? > That is too much for a special option. > > > > > > > >> > >> > >> > > >> > > >> > > > > >> > > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > >> > > > index e5acece1e4..5e4062e9f2 100644 > >> > > > --- a/libavfilter/vf_tpad.c > >> > > > +++ b/libavfilter/vf_tpad.c > >> > > > @@ -140,7 +140,7 @@ static int activate(AVFilterContext *ctx) > >> > > > ff_outlink_set_status(outlink, AVERROR_EOF, s->pts); > >> > > > return 0; > >> > > > } > >> > > > - if (s->stop_mode == 0) { > >> > > > + if (s->stop_mode == 0 || !s->cache_stop) { > >> > > > frame = ff_get_video_buffer(outlink, outlink->w, > >> > > outlink->h); > >> > > > if (!frame) > >> > > > return AVERROR(ENOMEM); > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > _______________________________________________ > >> > > > > ffmpeg-cvslog mailing list > >> > > > > ffmpeg-cvslog@ffmpeg.org > >> > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog > >> > > > > > >> > > > > To unsubscribe, visit link above, or email > >> > > > > ffmpeg-cvslog-request@ffmpeg.org with subject "unsubscribe". > >> > > > > > >> > > > > >> > > > > >> > > > -- > >> > > > > >> > > > Thierry Foucu > >> > > > _______________________________________________ > >> > > > ffmpeg-devel mailing list > >> > > > ffmpeg-devel@ffmpeg.org > >> > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > >> > > > > >> > > > To unsubscribe, visit link above, or email > >> > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > >> > > > > >> > > _______________________________________________ > >> > > ffmpeg-devel mailing list > >> > > ffmpeg-devel@ffmpeg.org > >> > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > >> > > > >> > > To unsubscribe, visit link above, or email > >> > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > >> > > > >> > > >> > > >> > -- > >> > > >> > Thierry Foucu > >> > _______________________________________________ > >> > ffmpeg-devel mailing list > >> > ffmpeg-devel@ffmpeg.org > >> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > >> > > >> > To unsubscribe, visit link above, or email > >> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > >> > > >> _______________________________________________ > >> ffmpeg-devel mailing list > >> ffmpeg-devel@ffmpeg.org > >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > >> > >> To unsubscribe, visit link above, or email > >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > >> > > > > > > -- > > > > Thierry Foucu > > > > > -- > > Thierry Foucu > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-25 7:51 ` Paul B Mahol @ 2022-02-25 21:07 ` Thierry Foucu 2022-02-27 11:55 ` Paul B Mahol 0 siblings, 1 reply; 11+ messages in thread From: Thierry Foucu @ 2022-02-25 21:07 UTC (permalink / raw) To: FFmpeg development discussions and patches On Thu, Feb 24, 2022 at 11:50 PM Paul B Mahol <onemda@gmail.com> wrote: > On Thu, Feb 24, 2022 at 11:21 PM Thierry Foucu <tfoucu@gmail.com> wrote: > > > On Thu, Feb 24, 2022 at 2:19 PM Thierry Foucu <tfoucu@gmail.com> wrote: > > > > > > > > > > > On Thu, Feb 24, 2022 at 1:50 PM Paul B Mahol <onemda@gmail.com> wrote: > > > > > >> On Thu, Feb 24, 2022 at 10:36 PM Thierry Foucu <tfoucu@gmail.com> > > wrote: > > >> > > >> > On Thu, Feb 24, 2022 at 1:28 PM Paul B Mahol <onemda@gmail.com> > > wrote: > > >> > > > >> > > On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu <tfoucu@gmail.com> > > >> wrote: > > >> > > > > >> > > > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol <git@videolan.org > > > > >> > wrote: > > >> > > > > > >> > > > > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> | > Thu > > >> Feb > > >> > 24 > > >> > > > > 20:32:41 2022 +0100| > [3715f2f8643695940582ce040b7a052cccfb9db2] > > | > > >> > > > > committer: Paul B Mahol > > >> > > > > > > >> > > > > avfilter/vf_tpad: if there is no frame to clone return early > > >> > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > >> > > > http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 > > >> > > > > --- > > >> > > > > > > >> > > > > libavfilter/vf_tpad.c | 5 +++++ > > >> > > > > 1 file changed, 5 insertions(+) > > >> > > > > > > >> > > > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > >> > > > > index e5acece1e4..120dbcb4d3 100644 > > >> > > > > --- a/libavfilter/vf_tpad.c > > >> > > > > +++ b/libavfilter/vf_tpad.c > > >> > > > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext *ctx) > > >> > > > > frame->data, frame->linesize, > > >> > > > > 0, 0, frame->width, > > frame->height); > > >> > > > > } else if (s->stop_mode == 1) { > > >> > > > > + if (!s->cache_stop) { > > >> > > > > + s->pad_stop = 0; > > >> > > > > + ff_outlink_set_status(outlink, AVERROR_EOF, > > >> s->pts); > > >> > > > > + return 0; > > >> > > > > + } > > >> > > > > frame = av_frame_clone(s->cache_stop); > > >> > > > > if (!frame) > > >> > > > > return AVERROR(ENOMEM); > > >> > > > > > > >> > > > > > > >> > > > The problem with this solution is that the tpad will then not do > > >> what > > >> > we > > >> > > > are expecting, which is padding video track, and the output file > > >> will > > >> > not > > >> > > > have the desired duration. > > >> > > > Will it not be better to just output black frame (aka stop_mode > == > > >> 0) , > > >> > > > something like that? > > >> > > > > > >> > > > > >> > > I doubt that, clone is clone, there is no point in padding stream > > that > > >> > have > > >> > > no frames at all. > > >> > > > > >> > > > > >> > > > > >> > The sample I forwarded to JB has video frames. The problem was that > > >> there > > >> > was a re-init of the filter chain after a resolution change and > after > > >> the > > >> > re-init, there were no frames but got frames before the re-init. > > >> > I will understand for a media file which has NEVER received a video > > >> frame > > >> > and in this case, this is the correct solution. > > >> > > > >> > > >> Hmm, so you encode output with resolution change, why not use scale > > filter > > >> as first filter and then no resolution ever change for rest of graph? > > >> Adding support for resolution changes to all filters is very time > > >> consuming > > >> task and I see no real benefit in doing that now. > > >> > > > > > > We do have the scale filter in front of the tpad filter. Here is the > > > filter chain we are using > > > > > > > > > idet=1.04:1.5,yadif=0:-1:1,scale=+528:+864:flags=bicubic,setsar=1,fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > > > > > > > Is this just increasing size instead of setting constant one? > Nope. It will just scale the video to 528x864 > > > > > And it does crash. > > > > > > Even just fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > > > reproduce the problem. > > > > > > > Maybe an option to the tpad filter to decide what should be the output > when > > the stop_mode == 1 and cache_stop is NULL? > > So, in some cases, people may want a color frame, and some other will > just > > want to exit right away? > > > > That is too much for a special option. > I understand. I'm just worried that due to some re-init of the filter chain and the fact there are filters which may or may not output a frame after the re-init, the tpad filter will then have no cache frame to clone. And in this case, the file does not have the length expected. I guess if it is documented or av_log, people will be aware of the potential issue. Anyway, thanks a lot for the quick fix. > > > > > > > > > > > > >> > > >> > > >> > > > >> > > > >> > > > > > >> > > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > >> > > > index e5acece1e4..5e4062e9f2 100644 > > >> > > > --- a/libavfilter/vf_tpad.c > > >> > > > +++ b/libavfilter/vf_tpad.c > > >> > > > @@ -140,7 +140,7 @@ static int activate(AVFilterContext *ctx) > > >> > > > ff_outlink_set_status(outlink, AVERROR_EOF, > s->pts); > > >> > > > return 0; > > >> > > > } > > >> > > > - if (s->stop_mode == 0) { > > >> > > > + if (s->stop_mode == 0 || !s->cache_stop) { > > >> > > > frame = ff_get_video_buffer(outlink, outlink->w, > > >> > > outlink->h); > > >> > > > if (!frame) > > >> > > > return AVERROR(ENOMEM); > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > _______________________________________________ > > >> > > > > ffmpeg-cvslog mailing list > > >> > > > > ffmpeg-cvslog@ffmpeg.org > > >> > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog > > >> > > > > > > >> > > > > To unsubscribe, visit link above, or email > > >> > > > > ffmpeg-cvslog-request@ffmpeg.org with subject "unsubscribe". > > >> > > > > > > >> > > > > > >> > > > > > >> > > > -- > > >> > > > > > >> > > > Thierry Foucu > > >> > > > _______________________________________________ > > >> > > > ffmpeg-devel mailing list > > >> > > > ffmpeg-devel@ffmpeg.org > > >> > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > >> > > > > > >> > > > To unsubscribe, visit link above, or email > > >> > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > >> > > > > > >> > > _______________________________________________ > > >> > > ffmpeg-devel mailing list > > >> > > ffmpeg-devel@ffmpeg.org > > >> > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > >> > > > > >> > > To unsubscribe, visit link above, or email > > >> > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > >> > > > > >> > > > >> > > > >> > -- > > >> > > > >> > Thierry Foucu > > >> > _______________________________________________ > > >> > ffmpeg-devel mailing list > > >> > ffmpeg-devel@ffmpeg.org > > >> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > >> > > > >> > To unsubscribe, visit link above, or email > > >> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > >> > > > >> _______________________________________________ > > >> ffmpeg-devel mailing list > > >> ffmpeg-devel@ffmpeg.org > > >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > >> > > >> To unsubscribe, visit link above, or email > > >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > >> > > > > > > > > > -- > > > > > > Thierry Foucu > > > > > > > > > -- > > > > Thierry Foucu > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > -- Thierry Foucu _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-25 21:07 ` Thierry Foucu @ 2022-02-27 11:55 ` Paul B Mahol 2022-02-28 17:52 ` Thierry Foucu 0 siblings, 1 reply; 11+ messages in thread From: Paul B Mahol @ 2022-02-27 11:55 UTC (permalink / raw) To: FFmpeg development discussions and patches On Fri, Feb 25, 2022 at 10:08 PM Thierry Foucu <tfoucu@gmail.com> wrote: > On Thu, Feb 24, 2022 at 11:50 PM Paul B Mahol <onemda@gmail.com> wrote: > > > On Thu, Feb 24, 2022 at 11:21 PM Thierry Foucu <tfoucu@gmail.com> wrote: > > > > > On Thu, Feb 24, 2022 at 2:19 PM Thierry Foucu <tfoucu@gmail.com> > wrote: > > > > > > > > > > > > > > > On Thu, Feb 24, 2022 at 1:50 PM Paul B Mahol <onemda@gmail.com> > wrote: > > > > > > > >> On Thu, Feb 24, 2022 at 10:36 PM Thierry Foucu <tfoucu@gmail.com> > > > wrote: > > > >> > > > >> > On Thu, Feb 24, 2022 at 1:28 PM Paul B Mahol <onemda@gmail.com> > > > wrote: > > > >> > > > > >> > > On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu < > tfoucu@gmail.com> > > > >> wrote: > > > >> > > > > > >> > > > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol < > git@videolan.org > > > > > > >> > wrote: > > > >> > > > > > > >> > > > > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> | > > Thu > > > >> Feb > > > >> > 24 > > > >> > > > > 20:32:41 2022 +0100| > > [3715f2f8643695940582ce040b7a052cccfb9db2] > > > | > > > >> > > > > committer: Paul B Mahol > > > >> > > > > > > > >> > > > > avfilter/vf_tpad: if there is no frame to clone return early > > > >> > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > >> > > > > > > http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 > > > >> > > > > --- > > > >> > > > > > > > >> > > > > libavfilter/vf_tpad.c | 5 +++++ > > > >> > > > > 1 file changed, 5 insertions(+) > > > >> > > > > > > > >> > > > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > > >> > > > > index e5acece1e4..120dbcb4d3 100644 > > > >> > > > > --- a/libavfilter/vf_tpad.c > > > >> > > > > +++ b/libavfilter/vf_tpad.c > > > >> > > > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext > *ctx) > > > >> > > > > frame->data, frame->linesize, > > > >> > > > > 0, 0, frame->width, > > > frame->height); > > > >> > > > > } else if (s->stop_mode == 1) { > > > >> > > > > + if (!s->cache_stop) { > > > >> > > > > + s->pad_stop = 0; > > > >> > > > > + ff_outlink_set_status(outlink, AVERROR_EOF, > > > >> s->pts); > > > >> > > > > + return 0; > > > >> > > > > + } > > > >> > > > > frame = av_frame_clone(s->cache_stop); > > > >> > > > > if (!frame) > > > >> > > > > return AVERROR(ENOMEM); > > > >> > > > > > > > >> > > > > > > > >> > > > The problem with this solution is that the tpad will then not > do > > > >> what > > > >> > we > > > >> > > > are expecting, which is padding video track, and the output > file > > > >> will > > > >> > not > > > >> > > > have the desired duration. > > > >> > > > Will it not be better to just output black frame (aka > stop_mode > > == > > > >> 0) , > > > >> > > > something like that? > > > >> > > > > > > >> > > > > > >> > > I doubt that, clone is clone, there is no point in padding > stream > > > that > > > >> > have > > > >> > > no frames at all. > > > >> > > > > > >> > > > > > >> > > > > > >> > The sample I forwarded to JB has video frames. The problem was > that > > > >> there > > > >> > was a re-init of the filter chain after a resolution change and > > after > > > >> the > > > >> > re-init, there were no frames but got frames before the re-init. > > > >> > I will understand for a media file which has NEVER received a > video > > > >> frame > > > >> > and in this case, this is the correct solution. > > > >> > > > > >> > > > >> Hmm, so you encode output with resolution change, why not use scale > > > filter > > > >> as first filter and then no resolution ever change for rest of > graph? > > > >> Adding support for resolution changes to all filters is very time > > > >> consuming > > > >> task and I see no real benefit in doing that now. > > > >> > > > > > > > > We do have the scale filter in front of the tpad filter. Here is the > > > > filter chain we are using > > > > > > > > > > > > > > idet=1.04:1.5,yadif=0:-1:1,scale=+528:+864:flags=bicubic,setsar=1,fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > > > > > > > > > > > Is this just increasing size instead of setting constant one? > > > > Nope. It will just scale the video to 528x864 > Then why filter is still reinited then? Looks like serious bug to me. > > > > > > > > > > And it does crash. > > > > > > > > Even just fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > > > > reproduce the problem. > > > > > > > > > > Maybe an option to the tpad filter to decide what should be the output > > when > > > the stop_mode == 1 and cache_stop is NULL? > > > So, in some cases, people may want a color frame, and some other will > > just > > > want to exit right away? > > > > > > > That is too much for a special option. > > > > I understand. > I'm just worried that due to some re-init of the filter chain and the fact > there are filters which may or may not output a frame after the re-init, > the tpad filter will then have no cache frame to clone. And in this case, > the file does not have the length expected. > > I guess if it is documented or av_log, people will be aware of the > potential issue. > > Anyway, thanks a lot for the quick fix. > > > > > > > > > > > > > > > > > > > >> > > > >> > > > >> > > > > >> > > > > >> > > > > > > >> > > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > > >> > > > index e5acece1e4..5e4062e9f2 100644 > > > >> > > > --- a/libavfilter/vf_tpad.c > > > >> > > > +++ b/libavfilter/vf_tpad.c > > > >> > > > @@ -140,7 +140,7 @@ static int activate(AVFilterContext *ctx) > > > >> > > > ff_outlink_set_status(outlink, AVERROR_EOF, > > s->pts); > > > >> > > > return 0; > > > >> > > > } > > > >> > > > - if (s->stop_mode == 0) { > > > >> > > > + if (s->stop_mode == 0 || !s->cache_stop) { > > > >> > > > frame = ff_get_video_buffer(outlink, outlink->w, > > > >> > > outlink->h); > > > >> > > > if (!frame) > > > >> > > > return AVERROR(ENOMEM); > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > _______________________________________________ > > > >> > > > > ffmpeg-cvslog mailing list > > > >> > > > > ffmpeg-cvslog@ffmpeg.org > > > >> > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog > > > >> > > > > > > > >> > > > > To unsubscribe, visit link above, or email > > > >> > > > > ffmpeg-cvslog-request@ffmpeg.org with subject > "unsubscribe". > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > -- > > > >> > > > > > > >> > > > Thierry Foucu > > > >> > > > _______________________________________________ > > > >> > > > ffmpeg-devel mailing list > > > >> > > > ffmpeg-devel@ffmpeg.org > > > >> > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > >> > > > > > > >> > > > To unsubscribe, visit link above, or email > > > >> > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > >> > > > > > > >> > > _______________________________________________ > > > >> > > ffmpeg-devel mailing list > > > >> > > ffmpeg-devel@ffmpeg.org > > > >> > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > >> > > > > > >> > > To unsubscribe, visit link above, or email > > > >> > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > >> > > > > > >> > > > > >> > > > > >> > -- > > > >> > > > > >> > Thierry Foucu > > > >> > _______________________________________________ > > > >> > ffmpeg-devel mailing list > > > >> > ffmpeg-devel@ffmpeg.org > > > >> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > >> > > > > >> > To unsubscribe, visit link above, or email > > > >> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > >> > > > > >> _______________________________________________ > > > >> ffmpeg-devel mailing list > > > >> ffmpeg-devel@ffmpeg.org > > > >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > >> > > > >> To unsubscribe, visit link above, or email > > > >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > >> > > > > > > > > > > > > -- > > > > > > > > Thierry Foucu > > > > > > > > > > > > > -- > > > > > > Thierry Foucu > > > _______________________________________________ > > > ffmpeg-devel mailing list > > > ffmpeg-devel@ffmpeg.org > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > To unsubscribe, visit link above, or email > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > -- > > Thierry Foucu > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-27 11:55 ` Paul B Mahol @ 2022-02-28 17:52 ` Thierry Foucu 2022-03-03 12:40 ` Paul B Mahol 0 siblings, 1 reply; 11+ messages in thread From: Thierry Foucu @ 2022-02-28 17:52 UTC (permalink / raw) To: FFmpeg development discussions and patches On Sun, Feb 27, 2022 at 3:54 AM Paul B Mahol <onemda@gmail.com> wrote: > On Fri, Feb 25, 2022 at 10:08 PM Thierry Foucu <tfoucu@gmail.com> wrote: > > > On Thu, Feb 24, 2022 at 11:50 PM Paul B Mahol <onemda@gmail.com> wrote: > > > > > On Thu, Feb 24, 2022 at 11:21 PM Thierry Foucu <tfoucu@gmail.com> > wrote: > > > > > > > On Thu, Feb 24, 2022 at 2:19 PM Thierry Foucu <tfoucu@gmail.com> > > wrote: > > > > > > > > > > > > > > > > > > > On Thu, Feb 24, 2022 at 1:50 PM Paul B Mahol <onemda@gmail.com> > > wrote: > > > > > > > > > >> On Thu, Feb 24, 2022 at 10:36 PM Thierry Foucu <tfoucu@gmail.com> > > > > wrote: > > > > >> > > > > >> > On Thu, Feb 24, 2022 at 1:28 PM Paul B Mahol <onemda@gmail.com> > > > > wrote: > > > > >> > > > > > >> > > On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu < > > tfoucu@gmail.com> > > > > >> wrote: > > > > >> > > > > > > >> > > > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol < > > git@videolan.org > > > > > > > > >> > wrote: > > > > >> > > > > > > > >> > > > > ffmpeg | branch: master | Paul B Mahol <onemda@gmail.com> > | > > > Thu > > > > >> Feb > > > > >> > 24 > > > > >> > > > > 20:32:41 2022 +0100| > > > [3715f2f8643695940582ce040b7a052cccfb9db2] > > > > | > > > > >> > > > > committer: Paul B Mahol > > > > >> > > > > > > > > >> > > > > avfilter/vf_tpad: if there is no frame to clone return > early > > > > >> > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > >> > > > > > > > > > > http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 > > > > >> > > > > --- > > > > >> > > > > > > > > >> > > > > libavfilter/vf_tpad.c | 5 +++++ > > > > >> > > > > 1 file changed, 5 insertions(+) > > > > >> > > > > > > > > >> > > > > diff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > > > >> > > > > index e5acece1e4..120dbcb4d3 100644 > > > > >> > > > > --- a/libavfilter/vf_tpad.c > > > > >> > > > > +++ b/libavfilter/vf_tpad.c > > > > >> > > > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext > > *ctx) > > > > >> > > > > frame->data, > frame->linesize, > > > > >> > > > > 0, 0, frame->width, > > > > frame->height); > > > > >> > > > > } else if (s->stop_mode == 1) { > > > > >> > > > > + if (!s->cache_stop) { > > > > >> > > > > + s->pad_stop = 0; > > > > >> > > > > + ff_outlink_set_status(outlink, > AVERROR_EOF, > > > > >> s->pts); > > > > >> > > > > + return 0; > > > > >> > > > > + } > > > > >> > > > > frame = av_frame_clone(s->cache_stop); > > > > >> > > > > if (!frame) > > > > >> > > > > return AVERROR(ENOMEM); > > > > >> > > > > > > > > >> > > > > > > > > >> > > > The problem with this solution is that the tpad will then > not > > do > > > > >> what > > > > >> > we > > > > >> > > > are expecting, which is padding video track, and the output > > file > > > > >> will > > > > >> > not > > > > >> > > > have the desired duration. > > > > >> > > > Will it not be better to just output black frame (aka > > stop_mode > > > == > > > > >> 0) , > > > > >> > > > something like that? > > > > >> > > > > > > > >> > > > > > > >> > > I doubt that, clone is clone, there is no point in padding > > stream > > > > that > > > > >> > have > > > > >> > > no frames at all. > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > The sample I forwarded to JB has video frames. The problem was > > that > > > > >> there > > > > >> > was a re-init of the filter chain after a resolution change and > > > after > > > > >> the > > > > >> > re-init, there were no frames but got frames before the re-init. > > > > >> > I will understand for a media file which has NEVER received a > > video > > > > >> frame > > > > >> > and in this case, this is the correct solution. > > > > >> > > > > > >> > > > > >> Hmm, so you encode output with resolution change, why not use > scale > > > > filter > > > > >> as first filter and then no resolution ever change for rest of > > graph? > > > > >> Adding support for resolution changes to all filters is very time > > > > >> consuming > > > > >> task and I see no real benefit in doing that now. > > > > >> > > > > > > > > > > We do have the scale filter in front of the tpad filter. Here is > the > > > > > filter chain we are using > > > > > > > > > > > > > > > > > > > > idet=1.04:1.5,yadif=0:-1:1,scale=+528:+864:flags=bicubic,setsar=1,fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > > > > > > > > > > > > > > > Is this just increasing size instead of setting constant one? > > > > > > > Nope. It will just scale the video to 528x864 > > > > Then why filter is still reinited then? > Looks like serious bug to me. > Here is the verbose log when running ffmpeg with the filter chain. The input resolution went from 1280x692 then changed to 1280x720 followed by 1280x718 And from the log, it is clear that the filter chain is being re-initialize. Input #0, matroska,webm, from '/tmp/crash_tpad': Metadata: ENCODER : Lavf58.76.100 Duration: 00:08:07.44, start: 0.000000, bitrate: 78 kb/s Stream #0:0(eng): Video: vp9 (Profile 0), 1 reference frame, yuv420p(tv), 1280x692, SAR 1:1 DAR 320:173, 59.94 fps, 59.94 tbr, 1k tbn (default) Metadata: ALPHA_MODE : 1 DURATION : 00:08:06.780000000 Stream #0:1(eng): Audio: opus, 48000 Hz, mono, fltp (default) Metadata: DURATION : 00:08:07.440000000 Stream mapping: Stream #0:0 -> #0:0 (vp9 (native) -> wrapped_avframe (native)) Stream #0:1 -> #0:1 (opus (native) -> pcm_s16le (native)) Press [q] to stop, [?] for help [graph_1_in_0_1 @ 0x55df4ff5f180] tb:1/48000 samplefmt:fltp samplerate:48000 chlayout:0x4 [format_out_0_1 @ 0x55df4ff5fd40] auto-inserting filter 'auto_aresample_0' between the filter 'Parsed_anull_0' and the filter 'format_out_0_1' [auto_aresample_0 @ 0x55df4ff61340] ch:1 chl:mono fmt:fltp r:48000Hz -> ch:1 chl:mono fmt:s16 r:48000Hz [Parsed_scale_2 @ 0x55df4ffa7040] w:+528 h:+864 flags:'bicubic' interl:0 [graph 0 input from stream 0:0 @ 0x55df4ffab580] w:1280 h:692 pixfmt:yuv420p tb:1/1000 fr:19001/317 sar:1/1 [Parsed_scale_2 @ 0x55df4ffa7040] w:1280 h:692 fmt:yuv420p sar:1/1 -> w:528 h:864 fmt:yuv420p sar:5760/1903 flags:0x4 [Parsed_setsar_3 @ 0x55df4ffa7e80] w:528 h:864 sar:5760/1903 dar:320/173 -> sar:1/1 dar:11/18 [Parsed_fps_4 @ 0x55df4ffa8880] fps=16601/1000 [Parsed_fps_4 @ 0x55df4ffa8880] Set first pts to 0 Output #0, null, to 'pipe:': Metadata: encoder : Lavf59.17.102 Stream #0:0(eng): Video: wrapped_avframe, 1 reference frame, yuv420p(tv, progressive), 528x864 (0x0) [SAR 1:1 DAR 11:18], q=2-31, 200 kb/s, 16.60 fps, 16.60 tbn (default) Metadata: ALPHA_MODE : 1 DURATION : 00:08:06.780000000 encoder : Lavc59.21.100 wrapped_avframe Stream #0:1(eng): Audio: pcm_s16le, 48000 Hz, mono, s16, 768 kb/s (default) Metadata: DURATION : 00:08:07.440000000 encoder : Lavc59.21.100 pcm_s16le [Parsed_idet_0 @ 0x55df4ffa0700] Repeated Fields: Neither: 88 Top: 0 Bottom: 0 [Parsed_idet_0 @ 0x55df4ffa0700] Single frame detection: TFF: 0 BFF: 0 Progressive: 1 Undetermined: 87 [Parsed_idet_0 @ 0x55df4ffa0700] Multi frame detection: TFF: 0 BFF: 0 Progressive: 1 Undetermined: 87 [Parsed_fps_4 @ 0x55df4ffa8880] 87 frames in, 62 frames out; 27 frames dropped, 2 frames duplicated. [Parsed_scale_2 @ 0x55df4ffaa1c0] w:+528 h:+864 flags:'bicubic' interl:0 [graph 0 input from stream 0:0 @ 0x55df4ff94140] w:1280 h:720 pixfmt:yuv420p tb:1/1000 fr:19001/317 sar:1/1 [scaler_out_0_0 @ 0x55df4ff9de00] w:528 h:864 flags:'' interl:0 [Parsed_scale_2 @ 0x55df4ffaa1c0] w:1280 h:720 fmt:yuv420p sar:1/1 -> w:528 h:864 fmt:yuv420p sar:32/11 flags:0x4 [Parsed_setsar_3 @ 0x55df4ffaea40] w:528 h:864 sar:32/11 dar:16/9 -> sar:1/1 dar:11/18 [Parsed_fps_4 @ 0x55df4ff91fc0] fps=16601/1000 [scaler_out_0_0 @ 0x55df4ff9de00] w:528 h:864 fmt:yuv420p sar:1/1 -> w:528 h:864 fmt:yuv420p sar:1/1 flags:0x0 [Parsed_fps_4 @ 0x55df4ff91fc0] Set first pts to 64 [Parsed_idet_0 @ 0x55df4ff9bd00] Repeated Fields: Neither: 998 Top: 0 Bottom: 2 [Parsed_idet_0 @ 0x55df4ff9bd00] Single frame detection: TFF: 0 BFF: 0 Progressive: 11 Undetermined: 989 [Parsed_idet_0 @ 0x55df4ff9bd00] Multi frame detection: TFF: 0 BFF: 0 Progressive: 1000 Undetermined: 0 [Parsed_fps_4 @ 0x55df4ff91fc0] 999 frames in, 8004 frames out; 39 frames dropped, 7044 frames duplicated. [Parsed_scale_2 @ 0x55df50130e80] w:+528 h:+864 flags:'bicubic' interl:0 [graph 0 input from stream 0:0 @ 0x55df5029dd00] w:1280 h:718 pixfmt:yuv420p tb:1/1000 fr:19001/317 sar:1/1 [scaler_out_0_0 @ 0x55df4ff93640] w:528 h:864 flags:'' interl:0 [Parsed_scale_2 @ 0x55df50130e80] w:1280 h:718 fmt:yuv420p sar:1/1 -> w:528 h:864 fmt:yuv420p sar:11520/3949 flags:0x4 [Parsed_setsar_3 @ 0x55df50413380] w:528 h:864 sar:11520/3949 dar:640/359 -> sar:1/1 dar:11/18 [Parsed_fps_4 @ 0x55df4ff7af80] fps=16601/1000 [scaler_out_0_0 @ 0x55df4ff93640] w:528 h:864 fmt:yuv420p sar:1/1 -> w:528 h:864 fmt:yuv420p sar:1/1 flags:0x0 [Parsed_fps_4 @ 0x55df4ff7af80] Set first pts to 8081 No more output streams to write to, finishing. frame= 8066 fps=1787 q=-0.0 Lsize=N/A time=00:08:07.44 bitrate=N/A speed= 108x video:3529kB audio:45698kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown Input file #0 (/tmp/crash_tpad): Input stream #0:0 (video): 1091 packets read (1667477 bytes); 1091 frames decoded; Input stream #0:1 (audio): 8124 packets read (3026650 bytes); 8124 frames decoded (23397120 samples); Total: 9215 packets (4694127 bytes) demuxed Output file #0 (pipe:): Output stream #0:0 (video): 8066 frames encoded; 8066 packets muxed (3613568 bytes); Output stream #0:1 (audio): 8124 frames encoded (23397120 samples); 8124 packets muxed (46794240 bytes); Total: 16190 packets (50407808 bytes) muxed [Parsed_idet_0 @ 0x55df4ff7f8c0] Repeated Fields: Neither: 1 Top: 0 Bottom: 0 [Parsed_idet_0 @ 0x55df4ff7f8c0] Single frame detection: TFF: 0 BFF: 0 Progressive: 0 Undetermined: 1 [Parsed_idet_0 @ 0x55df4ff7f8c0] Multi frame detection: TFF: 0 BFF: 0 Progressive: 0 Undetermined: 1 [Parsed_fps_4 @ 0x55df4ff7af80] 1 frames in, 0 frames out; 1 frames dropped, 0 frames duplicated. [AVIOContext @ 0x55df4fe98180] Statistics: 4759868 bytes read, 0 seeks > > > > > > > > > > > > > > > > > And it does crash. > > > > > > > > > > Even just fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms > > > > > reproduce the problem. > > > > > > > > > > > > > Maybe an option to the tpad filter to decide what should be the > output > > > when > > > > the stop_mode == 1 and cache_stop is NULL? > > > > So, in some cases, people may want a color frame, and some other will > > > just > > > > want to exit right away? > > > > > > > > > > That is too much for a special option. > > > > > > > I understand. > > I'm just worried that due to some re-init of the filter chain and the > fact > > there are filters which may or may not output a frame after the re-init, > > the tpad filter will then have no cache frame to clone. And in this case, > > the file does not have the length expected. > > > > I guess if it is documented or av_log, people will be aware of the > > potential issue. > > > > Anyway, thanks a lot for the quick fix. > > > > > > > > > > > > > > > > > > > > > > > > > > >> > > > > >> > > > > >> > > > > > >> > > > > > >> > > > > > > > >> > > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c > > > > >> > > > index e5acece1e4..5e4062e9f2 100644 > > > > >> > > > --- a/libavfilter/vf_tpad.c > > > > >> > > > +++ b/libavfilter/vf_tpad.c > > > > >> > > > @@ -140,7 +140,7 @@ static int activate(AVFilterContext > *ctx) > > > > >> > > > ff_outlink_set_status(outlink, AVERROR_EOF, > > > s->pts); > > > > >> > > > return 0; > > > > >> > > > } > > > > >> > > > - if (s->stop_mode == 0) { > > > > >> > > > + if (s->stop_mode == 0 || !s->cache_stop) { > > > > >> > > > frame = ff_get_video_buffer(outlink, > outlink->w, > > > > >> > > outlink->h); > > > > >> > > > if (!frame) > > > > >> > > > return AVERROR(ENOMEM); > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > _______________________________________________ > > > > >> > > > > ffmpeg-cvslog mailing list > > > > >> > > > > ffmpeg-cvslog@ffmpeg.org > > > > >> > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog > > > > >> > > > > > > > > >> > > > > To unsubscribe, visit link above, or email > > > > >> > > > > ffmpeg-cvslog-request@ffmpeg.org with subject > > "unsubscribe". > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > -- > > > > >> > > > > > > > >> > > > Thierry Foucu > > > > >> > > > _______________________________________________ > > > > >> > > > ffmpeg-devel mailing list > > > > >> > > > ffmpeg-devel@ffmpeg.org > > > > >> > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > >> > > > > > > > >> > > > To unsubscribe, visit link above, or email > > > > >> > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > >> > > > > > > > >> > > _______________________________________________ > > > > >> > > ffmpeg-devel mailing list > > > > >> > > ffmpeg-devel@ffmpeg.org > > > > >> > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > >> > > > > > > >> > > To unsubscribe, visit link above, or email > > > > >> > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > >> > > > > > > >> > > > > > >> > > > > > >> > -- > > > > >> > > > > > >> > Thierry Foucu > > > > >> > _______________________________________________ > > > > >> > ffmpeg-devel mailing list > > > > >> > ffmpeg-devel@ffmpeg.org > > > > >> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > >> > > > > > >> > To unsubscribe, visit link above, or email > > > > >> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > >> > > > > > >> _______________________________________________ > > > > >> ffmpeg-devel mailing list > > > > >> ffmpeg-devel@ffmpeg.org > > > > >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > >> > > > > >> To unsubscribe, visit link above, or email > > > > >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > >> > > > > > > > > > > > > > > > -- > > > > > > > > > > Thierry Foucu > > > > > > > > > > > > > > > > > -- > > > > > > > > Thierry Foucu > > > > _______________________________________________ > > > > ffmpeg-devel mailing list > > > > ffmpeg-devel@ffmpeg.org > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > > > To unsubscribe, visit link above, or email > > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > > > _______________________________________________ > > > ffmpeg-devel mailing list > > > ffmpeg-devel@ffmpeg.org > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > > > To unsubscribe, visit link above, or email > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > > > > > > > -- > > > > Thierry Foucu > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > -- Thierry Foucu _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early 2022-02-28 17:52 ` Thierry Foucu @ 2022-03-03 12:40 ` Paul B Mahol 0 siblings, 0 replies; 11+ messages in thread From: Paul B Mahol @ 2022-03-03 12:40 UTC (permalink / raw) To: FFmpeg development discussions and patches On 2/28/22, Thierry Foucu <tfoucu@gmail.com> wrote: > On Sun, Feb 27, 2022 at 3:54 AM Paul B Mahol <onemda@gmail.com> wrote: > >> On Fri, Feb 25, 2022 at 10:08 PM Thierry Foucu <tfoucu@gmail.com> wrote: >> >> > On Thu, Feb 24, 2022 at 11:50 PM Paul B Mahol <onemda@gmail.com> wrote: >> > >> > > On Thu, Feb 24, 2022 at 11:21 PM Thierry Foucu <tfoucu@gmail.com> >> wrote: >> > > >> > > > On Thu, Feb 24, 2022 at 2:19 PM Thierry Foucu <tfoucu@gmail.com> >> > wrote: >> > > > >> > > > > >> > > > > >> > > > > On Thu, Feb 24, 2022 at 1:50 PM Paul B Mahol <onemda@gmail.com> >> > wrote: >> > > > > >> > > > >> On Thu, Feb 24, 2022 at 10:36 PM Thierry Foucu >> > > > >> <tfoucu@gmail.com> >> > > > wrote: >> > > > >> >> > > > >> > On Thu, Feb 24, 2022 at 1:28 PM Paul B Mahol >> > > > >> > <onemda@gmail.com> >> > > > wrote: >> > > > >> > >> > > > >> > > On Thu, Feb 24, 2022 at 10:12 PM Thierry Foucu < >> > tfoucu@gmail.com> >> > > > >> wrote: >> > > > >> > > >> > > > >> > > > On Thu, Feb 24, 2022 at 12:30 PM Paul B Mahol < >> > git@videolan.org >> > > > >> > > > >> > wrote: >> > > > >> > > > >> > > > >> > > > > ffmpeg | branch: master | Paul B Mahol >> > > > >> > > > > <onemda@gmail.com> >> | >> > > Thu >> > > > >> Feb >> > > > >> > 24 >> > > > >> > > > > 20:32:41 2022 +0100| >> > > [3715f2f8643695940582ce040b7a052cccfb9db2] >> > > > | >> > > > >> > > > > committer: Paul B Mahol >> > > > >> > > > > >> > > > >> > > > > avfilter/vf_tpad: if there is no frame to clone return >> early >> > > > >> > > > > >> > > > >> > > > > > >> > > > >> > > > > >> > > > >> > > > >> > > > >> > > >> > > > >> > >> > > > >> >> > > > >> > > >> > >> http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3715f2f8643695940582ce040b7a052cccfb9db2 >> > > > >> > > > > --- >> > > > >> > > > > >> > > > >> > > > > libavfilter/vf_tpad.c | 5 +++++ >> > > > >> > > > > 1 file changed, 5 insertions(+) >> > > > >> > > > > >> > > > >> > > > > diff --git a/libavfilter/vf_tpad.c >> > > > >> > > > > b/libavfilter/vf_tpad.c >> > > > >> > > > > index e5acece1e4..120dbcb4d3 100644 >> > > > >> > > > > --- a/libavfilter/vf_tpad.c >> > > > >> > > > > +++ b/libavfilter/vf_tpad.c >> > > > >> > > > > @@ -148,6 +148,11 @@ static int activate(AVFilterContext >> > *ctx) >> > > > >> > > > > frame->data, >> frame->linesize, >> > > > >> > > > > 0, 0, frame->width, >> > > > frame->height); >> > > > >> > > > > } else if (s->stop_mode == 1) { >> > > > >> > > > > + if (!s->cache_stop) { >> > > > >> > > > > + s->pad_stop = 0; >> > > > >> > > > > + ff_outlink_set_status(outlink, >> AVERROR_EOF, >> > > > >> s->pts); >> > > > >> > > > > + return 0; >> > > > >> > > > > + } >> > > > >> > > > > frame = av_frame_clone(s->cache_stop); >> > > > >> > > > > if (!frame) >> > > > >> > > > > return AVERROR(ENOMEM); >> > > > >> > > > > >> > > > >> > > > > >> > > > >> > > > The problem with this solution is that the tpad will then >> not >> > do >> > > > >> what >> > > > >> > we >> > > > >> > > > are expecting, which is padding video track, and the >> > > > >> > > > output >> > file >> > > > >> will >> > > > >> > not >> > > > >> > > > have the desired duration. >> > > > >> > > > Will it not be better to just output black frame (aka >> > stop_mode >> > > == >> > > > >> 0) , >> > > > >> > > > something like that? >> > > > >> > > > >> > > > >> > > >> > > > >> > > I doubt that, clone is clone, there is no point in padding >> > stream >> > > > that >> > > > >> > have >> > > > >> > > no frames at all. >> > > > >> > > >> > > > >> > > >> > > > >> > > >> > > > >> > The sample I forwarded to JB has video frames. The problem was >> > that >> > > > >> there >> > > > >> > was a re-init of the filter chain after a resolution change >> > > > >> > and >> > > after >> > > > >> the >> > > > >> > re-init, there were no frames but got frames before the >> > > > >> > re-init. >> > > > >> > I will understand for a media file which has NEVER received a >> > video >> > > > >> frame >> > > > >> > and in this case, this is the correct solution. >> > > > >> > >> > > > >> >> > > > >> Hmm, so you encode output with resolution change, why not use >> scale >> > > > filter >> > > > >> as first filter and then no resolution ever change for rest of >> > graph? >> > > > >> Adding support for resolution changes to all filters is very >> > > > >> time >> > > > >> consuming >> > > > >> task and I see no real benefit in doing that now. >> > > > >> >> > > > > >> > > > > We do have the scale filter in front of the tpad filter. Here is >> the >> > > > > filter chain we are using >> > > > > >> > > > > >> > > > >> > > >> > >> idet=1.04:1.5,yadif=0:-1:1,scale=+528:+864:flags=bicubic,setsar=1,fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms >> > > > > >> > > > >> > > >> > > Is this just increasing size instead of setting constant one? >> > > >> > >> > Nope. It will just scale the video to 528x864 >> > >> >> Then why filter is still reinited then? >> Looks like serious bug to me. >> > > Here is the verbose log when running ffmpeg with the filter chain. The > input resolution went from 1280x692 then changed to 1280x720 followed by > 1280x718 > And from the log, it is clear that the filter chain is being re-initialize. > All filters should not be reinitialized if only dimension change for first filter. This is current libavfilter limitation AFAIK. > Input #0, matroska,webm, from '/tmp/crash_tpad': > Metadata: > ENCODER : Lavf58.76.100 > Duration: 00:08:07.44, start: 0.000000, bitrate: 78 kb/s > Stream #0:0(eng): Video: vp9 (Profile 0), 1 reference frame, yuv420p(tv), > 1280x692, SAR 1:1 DAR 320:173, 59.94 fps, 59.94 tbr, 1k tbn (default) > Metadata: > ALPHA_MODE : 1 > DURATION : 00:08:06.780000000 > Stream #0:1(eng): Audio: opus, 48000 Hz, mono, fltp (default) > Metadata: > DURATION : 00:08:07.440000000 > Stream mapping: > Stream #0:0 -> #0:0 (vp9 (native) -> wrapped_avframe (native)) > Stream #0:1 -> #0:1 (opus (native) -> pcm_s16le (native)) > Press [q] to stop, [?] for help > [graph_1_in_0_1 @ 0x55df4ff5f180] tb:1/48000 samplefmt:fltp > samplerate:48000 chlayout:0x4 > [format_out_0_1 @ 0x55df4ff5fd40] auto-inserting filter 'auto_aresample_0' > between the filter 'Parsed_anull_0' and the filter 'format_out_0_1' > [auto_aresample_0 @ 0x55df4ff61340] ch:1 chl:mono fmt:fltp r:48000Hz -> > ch:1 chl:mono fmt:s16 r:48000Hz > [Parsed_scale_2 @ 0x55df4ffa7040] w:+528 h:+864 flags:'bicubic' interl:0 > [graph 0 input from stream 0:0 @ 0x55df4ffab580] w:1280 h:692 > pixfmt:yuv420p tb:1/1000 fr:19001/317 sar:1/1 > [Parsed_scale_2 @ 0x55df4ffa7040] w:1280 h:692 fmt:yuv420p sar:1/1 -> w:528 > h:864 fmt:yuv420p sar:5760/1903 flags:0x4 > [Parsed_setsar_3 @ 0x55df4ffa7e80] w:528 h:864 sar:5760/1903 dar:320/173 -> > sar:1/1 dar:11/18 > [Parsed_fps_4 @ 0x55df4ffa8880] fps=16601/1000 > [Parsed_fps_4 @ 0x55df4ffa8880] Set first pts to 0 > Output #0, null, to 'pipe:': > Metadata: > encoder : Lavf59.17.102 > Stream #0:0(eng): Video: wrapped_avframe, 1 reference frame, yuv420p(tv, > progressive), 528x864 (0x0) [SAR 1:1 DAR 11:18], q=2-31, 200 kb/s, 16.60 > fps, 16.60 tbn (default) > Metadata: > ALPHA_MODE : 1 > DURATION : 00:08:06.780000000 > encoder : Lavc59.21.100 wrapped_avframe > Stream #0:1(eng): Audio: pcm_s16le, 48000 Hz, mono, s16, 768 kb/s > (default) > Metadata: > DURATION : 00:08:07.440000000 > encoder : Lavc59.21.100 pcm_s16le > [Parsed_idet_0 @ 0x55df4ffa0700] Repeated Fields: Neither: 88 Top: 0 > Bottom: 0 > [Parsed_idet_0 @ 0x55df4ffa0700] Single frame detection: TFF: 0 BFF: > 0 Progressive: 1 Undetermined: 87 > [Parsed_idet_0 @ 0x55df4ffa0700] Multi frame detection: TFF: 0 BFF: > 0 Progressive: 1 Undetermined: 87 > [Parsed_fps_4 @ 0x55df4ffa8880] 87 frames in, 62 frames out; 27 frames > dropped, 2 frames duplicated. > [Parsed_scale_2 @ 0x55df4ffaa1c0] w:+528 h:+864 flags:'bicubic' interl:0 > [graph 0 input from stream 0:0 @ 0x55df4ff94140] w:1280 h:720 > pixfmt:yuv420p tb:1/1000 fr:19001/317 sar:1/1 > [scaler_out_0_0 @ 0x55df4ff9de00] w:528 h:864 flags:'' interl:0 > [Parsed_scale_2 @ 0x55df4ffaa1c0] w:1280 h:720 fmt:yuv420p sar:1/1 -> w:528 > h:864 fmt:yuv420p sar:32/11 flags:0x4 > [Parsed_setsar_3 @ 0x55df4ffaea40] w:528 h:864 sar:32/11 dar:16/9 -> > sar:1/1 dar:11/18 > [Parsed_fps_4 @ 0x55df4ff91fc0] fps=16601/1000 > [scaler_out_0_0 @ 0x55df4ff9de00] w:528 h:864 fmt:yuv420p sar:1/1 -> w:528 > h:864 fmt:yuv420p sar:1/1 flags:0x0 > [Parsed_fps_4 @ 0x55df4ff91fc0] Set first pts to 64 > [Parsed_idet_0 @ 0x55df4ff9bd00] Repeated Fields: Neither: 998 Top: 0 > Bottom: 2 > [Parsed_idet_0 @ 0x55df4ff9bd00] Single frame detection: TFF: 0 BFF: > 0 Progressive: 11 Undetermined: 989 > [Parsed_idet_0 @ 0x55df4ff9bd00] Multi frame detection: TFF: 0 BFF: > 0 Progressive: 1000 Undetermined: 0 > [Parsed_fps_4 @ 0x55df4ff91fc0] 999 frames in, 8004 frames out; 39 frames > dropped, 7044 frames duplicated. > [Parsed_scale_2 @ 0x55df50130e80] w:+528 h:+864 flags:'bicubic' interl:0 > [graph 0 input from stream 0:0 @ 0x55df5029dd00] w:1280 h:718 > pixfmt:yuv420p tb:1/1000 fr:19001/317 sar:1/1 > [scaler_out_0_0 @ 0x55df4ff93640] w:528 h:864 flags:'' interl:0 > [Parsed_scale_2 @ 0x55df50130e80] w:1280 h:718 fmt:yuv420p sar:1/1 -> w:528 > h:864 fmt:yuv420p sar:11520/3949 flags:0x4 > [Parsed_setsar_3 @ 0x55df50413380] w:528 h:864 sar:11520/3949 dar:640/359 > -> sar:1/1 dar:11/18 > [Parsed_fps_4 @ 0x55df4ff7af80] fps=16601/1000 > [scaler_out_0_0 @ 0x55df4ff93640] w:528 h:864 fmt:yuv420p sar:1/1 -> w:528 > h:864 fmt:yuv420p sar:1/1 flags:0x0 > [Parsed_fps_4 @ 0x55df4ff7af80] Set first pts to 8081 > No more output streams to write to, finishing. > frame= 8066 fps=1787 q=-0.0 Lsize=N/A time=00:08:07.44 bitrate=N/A speed= > 108x > video:3529kB audio:45698kB subtitle:0kB other streams:0kB global > headers:0kB muxing overhead: unknown > Input file #0 (/tmp/crash_tpad): > Input stream #0:0 (video): 1091 packets read (1667477 bytes); 1091 frames > decoded; > Input stream #0:1 (audio): 8124 packets read (3026650 bytes); 8124 frames > decoded (23397120 samples); > Total: 9215 packets (4694127 bytes) demuxed > Output file #0 (pipe:): > Output stream #0:0 (video): 8066 frames encoded; 8066 packets muxed > (3613568 bytes); > Output stream #0:1 (audio): 8124 frames encoded (23397120 samples); 8124 > packets muxed (46794240 bytes); > Total: 16190 packets (50407808 bytes) muxed > [Parsed_idet_0 @ 0x55df4ff7f8c0] Repeated Fields: Neither: 1 Top: 0 > Bottom: 0 > [Parsed_idet_0 @ 0x55df4ff7f8c0] Single frame detection: TFF: 0 BFF: > 0 Progressive: 0 Undetermined: 1 > [Parsed_idet_0 @ 0x55df4ff7f8c0] Multi frame detection: TFF: 0 BFF: > 0 Progressive: 0 Undetermined: 1 > [Parsed_fps_4 @ 0x55df4ff7af80] 1 frames in, 0 frames out; 1 frames > dropped, 0 frames duplicated. > [AVIOContext @ 0x55df4fe98180] Statistics: 4759868 bytes read, 0 seeks > > > >> >> >> > >> > >> > > >> > > >> > > > > And it does crash. >> > > > > >> > > > > Even just >> > > > > fps=fps=16.601,tpad=stop_mode=clone:stop_duration=2808ms >> > > > > reproduce the problem. >> > > > > >> > > > >> > > > Maybe an option to the tpad filter to decide what should be the >> output >> > > when >> > > > the stop_mode == 1 and cache_stop is NULL? >> > > > So, in some cases, people may want a color frame, and some other >> > > > will >> > > just >> > > > want to exit right away? >> > > > >> > > >> > > That is too much for a special option. >> > > >> > >> > I understand. >> > I'm just worried that due to some re-init of the filter chain and the >> fact >> > there are filters which may or may not output a frame after the >> > re-init, >> > the tpad filter will then have no cache frame to clone. And in this >> > case, >> > the file does not have the length expected. >> > >> > I guess if it is documented or av_log, people will be aware of the >> > potential issue. >> > >> > Anyway, thanks a lot for the quick fix. >> > >> > >> > > > >> > > > >> > > > > >> > > > > >> > > > >> >> > > > >> >> > > > >> > >> > > > >> > >> > > > >> > > > >> > > > >> > > > iff --git a/libavfilter/vf_tpad.c b/libavfilter/vf_tpad.c >> > > > >> > > > index e5acece1e4..5e4062e9f2 100644 >> > > > >> > > > --- a/libavfilter/vf_tpad.c >> > > > >> > > > +++ b/libavfilter/vf_tpad.c >> > > > >> > > > @@ -140,7 +140,7 @@ static int activate(AVFilterContext >> *ctx) >> > > > >> > > > ff_outlink_set_status(outlink, AVERROR_EOF, >> > > s->pts); >> > > > >> > > > return 0; >> > > > >> > > > } >> > > > >> > > > - if (s->stop_mode == 0) { >> > > > >> > > > + if (s->stop_mode == 0 || !s->cache_stop) { >> > > > >> > > > frame = ff_get_video_buffer(outlink, >> outlink->w, >> > > > >> > > outlink->h); >> > > > >> > > > if (!frame) >> > > > >> > > > return AVERROR(ENOMEM); >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > > _______________________________________________ >> > > > >> > > > > ffmpeg-cvslog mailing list >> > > > >> > > > > ffmpeg-cvslog@ffmpeg.org >> > > > >> > > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-cvslog >> > > > >> > > > > >> > > > >> > > > > To unsubscribe, visit link above, or email >> > > > >> > > > > ffmpeg-cvslog-request@ffmpeg.org with subject >> > "unsubscribe". >> > > > >> > > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > -- >> > > > >> > > > >> > > > >> > > > Thierry Foucu >> > > > >> > > > _______________________________________________ >> > > > >> > > > ffmpeg-devel mailing list >> > > > >> > > > ffmpeg-devel@ffmpeg.org >> > > > >> > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > > > >> > > > >> > > > >> > > > To unsubscribe, visit link above, or email >> > > > >> > > > ffmpeg-devel-request@ffmpeg.org with subject >> > > > >> > > > "unsubscribe". >> > > > >> > > > >> > > > >> > > _______________________________________________ >> > > > >> > > ffmpeg-devel mailing list >> > > > >> > > ffmpeg-devel@ffmpeg.org >> > > > >> > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > > > >> > > >> > > > >> > > To unsubscribe, visit link above, or email >> > > > >> > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > > > >> > > >> > > > >> > >> > > > >> > >> > > > >> > -- >> > > > >> > >> > > > >> > Thierry Foucu >> > > > >> > _______________________________________________ >> > > > >> > ffmpeg-devel mailing list >> > > > >> > ffmpeg-devel@ffmpeg.org >> > > > >> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > > > >> > >> > > > >> > To unsubscribe, visit link above, or email >> > > > >> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > > > >> > >> > > > >> _______________________________________________ >> > > > >> ffmpeg-devel mailing list >> > > > >> ffmpeg-devel@ffmpeg.org >> > > > >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > > > >> >> > > > >> To unsubscribe, visit link above, or email >> > > > >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > > > >> >> > > > > >> > > > > >> > > > > -- >> > > > > >> > > > > Thierry Foucu >> > > > > >> > > > >> > > > >> > > > -- >> > > > >> > > > Thierry Foucu >> > > > _______________________________________________ >> > > > ffmpeg-devel mailing list >> > > > ffmpeg-devel@ffmpeg.org >> > > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > > > >> > > > To unsubscribe, visit link above, or email >> > > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > > > >> > > _______________________________________________ >> > > ffmpeg-devel mailing list >> > > ffmpeg-devel@ffmpeg.org >> > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > > >> > > To unsubscribe, visit link above, or email >> > > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > > >> > >> > >> > -- >> > >> > Thierry Foucu >> > _______________________________________________ >> > ffmpeg-devel mailing list >> > ffmpeg-devel@ffmpeg.org >> > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> > >> > To unsubscribe, visit link above, or email >> > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > >> _______________________________________________ >> ffmpeg-devel mailing list >> ffmpeg-devel@ffmpeg.org >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> >> To unsubscribe, visit link above, or email >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". >> > > > -- > > Thierry Foucu > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2022-03-03 12:40 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20220224203039.CD4BB41059B@natalya.videolan.org>
2022-02-24 21:11 ` [FFmpeg-devel] [FFmpeg-cvslog] avfilter/vf_tpad: if there is no frame to clone return early Thierry Foucu
2022-02-24 21:29 ` Paul B Mahol
2022-02-24 21:35 ` Thierry Foucu
2022-02-24 21:51 ` Paul B Mahol
2022-02-24 22:19 ` Thierry Foucu
2022-02-24 22:20 ` Thierry Foucu
2022-02-25 7:51 ` Paul B Mahol
2022-02-25 21:07 ` Thierry Foucu
2022-02-27 11:55 ` Paul B Mahol
2022-02-28 17:52 ` Thierry Foucu
2022-03-03 12:40 ` Paul B Mahol
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git