From: quietvoid <tcchlisop0@gmail.com> To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org> Subject: Re: [FFmpeg-devel] [PATCH v10 1/5] avformat/dovi_isom: Implement Dolby Vision configuration parsing/writing Date: Fri, 31 Dec 2021 23:17:39 -0500 Message-ID: <CA+Nhy-DYrS6zZ5Em9w+kV-B=40HTqcVCbRzTjk0nTs5uzWxETw@mail.gmail.com> (raw) In-Reply-To: <AM7PR03MB666092ABE9478A43CB3804E18F479@AM7PR03MB6660.eurprd03.prod.outlook.com> On Fri, Dec 31, 2021 at 9:16 PM Andreas Rheinhardt <andreas.rheinhardt@outlook.com> wrote: > > quietvoid: > > Both parse/write implementations are based on mov/movenc. > > > > This only adds support for the "Dolby Vision configuration box". > > Other configuration boxes, such as > > "Dolby Vision enhancement layer configuration box" are not supported. > > > > The new functions will be used to implement parsing/writing the DOVI config > > for Matroska, as well as to refactor both mov/movenc to use dovi_isom functions. > > > > Signed-off-by: quietvoid <tcChlisop0@gmail.com> > > --- > > libavformat/dovi_isom.c | 118 ++++++++++++++++++++++++++++++++++++++++ > > libavformat/dovi_isom.h | 35 ++++++++++++ > > 2 files changed, 153 insertions(+) > > create mode 100644 libavformat/dovi_isom.c > > create mode 100644 libavformat/dovi_isom.h > > > > diff --git a/libavformat/dovi_isom.c b/libavformat/dovi_isom.c > > new file mode 100644 > > index 0000000000..262d7e37ba > > --- /dev/null > > +++ b/libavformat/dovi_isom.c > > @@ -0,0 +1,118 @@ > > +/* > > + * DOVI ISO Media common code > > + * > > + * Copyright (c) 2020 Vacing Fang <vacingfang@tencent.com> > > + * Copyright (c) 2021 quietvoid > > + * > > + * This file is part of FFmpeg. > > + * > > + * FFmpeg is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU Lesser General Public > > + * License as published by the Free Software Foundation; either > > + * version 2.1 of the License, or (at your option) any later version. > > + * > > + * FFmpeg is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > + * Lesser General Public License for more details. > > + * > > + * You should have received a copy of the GNU Lesser General Public > > + * License along with FFmpeg; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA > > + */ > > + > > +#include "libavutil/dovi_meta.h" > > + > > +#include "libavcodec/put_bits.h" > > + > > +#include "avformat.h" > > +#include "dovi_isom.h" > > + > > +int ff_isom_parse_dvcc_dvvc(AVFormatContext *s, AVStream *st, const uint8_t *buf_ptr, uint64_t size) > > +{ > > + uint32_t buf; > > + AVDOVIDecoderConfigurationRecord *dovi; > > + size_t dovi_size; > > + int ret; > > + > > + if (size > (1 << 30) || size < 4) > > + return AVERROR_INVALIDDATA; > > + > > + dovi = av_dovi_alloc(&dovi_size); > > + if (!dovi) > > + return AVERROR(ENOMEM); > > + > > + dovi->dv_version_major = *buf_ptr++; // 8 bits > > + dovi->dv_version_minor = *buf_ptr++; // 8 bits > > + > > + buf = *buf_ptr++ << 8; > > + buf |= *buf_ptr++; > > + > > + dovi->dv_profile = (buf >> 9) & 0x7f; // 7 bits > > + dovi->dv_level = (buf >> 3) & 0x3f; // 6 bits > > + dovi->rpu_present_flag = (buf >> 2) & 0x01; // 1 bit > > + dovi->el_present_flag = (buf >> 1) & 0x01; // 1 bit > > + dovi->bl_present_flag = buf & 0x01; // 1 bit > > + > > + // Has enough remaining data > > + if (size >= 5) { > > + dovi->dv_bl_signal_compatibility_id = ((*buf_ptr++) >> 4) & 0x0f; // 4 bits > > + } else { > > + // 0 stands for None > > + // Dolby Vision V1.2.93 profiles and levels > > + dovi->dv_bl_signal_compatibility_id = 0; > > + } > > + > > + ret = av_stream_add_side_data(st, AV_PKT_DATA_DOVI_CONF, > > + (uint8_t *)dovi, dovi_size); > > + if (ret < 0) { > > + av_free(dovi); > > + return ret; > > + } > > + > > + av_log(s, AV_LOG_TRACE, "DOVI in dvcC/dvvC/dvwC box, version: %d.%d, profile: %d, level: %d, " > > + "rpu flag: %d, el flag: %d, bl flag: %d, compatibility id: %d\n", > > + dovi->dv_version_major, dovi->dv_version_minor, > > + dovi->dv_profile, dovi->dv_level, > > + dovi->rpu_present_flag, > > + dovi->el_present_flag, > > + dovi->bl_present_flag, > > + dovi->dv_bl_signal_compatibility_id); > > + > > + return 0; > > +} > > + > > +void ff_isom_put_dvcc_dvvc(AVFormatContext *s, uint8_t out[ISOM_DVCC_DVVC_SIZE], > > + AVDOVIDecoderConfigurationRecord *dovi) > > +{ > > + PutBitContext pb; > > + > > + init_put_bits(&pb, out, ISOM_DVCC_DVVC_SIZE); > > + > > + put_bits(&pb, 8, dovi->dv_version_major); > > + put_bits(&pb, 8, dovi->dv_version_minor); > > + put_bits(&pb, 7, dovi->dv_profile); > > + put_bits(&pb, 6, dovi->dv_level); > > + put_bits(&pb, 1, dovi->rpu_present_flag); > > + put_bits(&pb, 1, dovi->el_present_flag); > > + put_bits(&pb, 1, dovi->bl_present_flag); > > + put_bits(&pb, 4, dovi->dv_bl_signal_compatibility_id); > > There is a slight problem with the last six values: They come from the > user and therefore must not be trusted to be within the range they are > supposed to be. (The put_bits API uses an av_assert2 to check that > the values to be written actually fit into the amount of bits that is > used to write them.) So I suggest you use !! for the flags and > appropriate masks for dv_profile, dv_level and > dv_bl_signal_compatibility_id. Thanks. I used the same masks as in the read function. Updated along with the fixes for the other patches in v11: https://ffmpeg.org/pipermail/ffmpeg-devel/2022-January/290611.html > > + > > + put_bits(&pb, 28, 0); /* reserved */ > > + put_bits32(&pb, 0); /* reserved */ > > + put_bits32(&pb, 0); /* reserved */ > > + put_bits32(&pb, 0); /* reserved */ > > + put_bits32(&pb, 0); /* reserved */ > > + > > + flush_put_bits(&pb); > > + > > + av_log(s, AV_LOG_DEBUG, "DOVI in %s box, version: %d.%d, profile: %d, level: %d, " > > + "rpu flag: %d, el flag: %d, bl flag: %d, compatibility id: %d\n", > > + dovi->dv_profile > 10 ? "dvwC" : (dovi->dv_profile > 7 ? "dvvC" : "dvcC"), > > + dovi->dv_version_major, dovi->dv_version_minor, > > + dovi->dv_profile, dovi->dv_level, > > + dovi->rpu_present_flag, > > + dovi->el_present_flag, > > + dovi->bl_present_flag, > > + dovi->dv_bl_signal_compatibility_id); > > +} > > diff --git a/libavformat/dovi_isom.h b/libavformat/dovi_isom.h > > new file mode 100644 > > index 0000000000..1526164319 > > --- /dev/null > > +++ b/libavformat/dovi_isom.h > > @@ -0,0 +1,35 @@ > > +/* > > + * DOVI ISO Media common code > > + * Copyright (c) 2021 quietvoid > > + * > > + * This file is part of FFmpeg. > > + * > > + * FFmpeg is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU Lesser General Public > > + * License as published by the Free Software Foundation; either > > + * version 2.1 of the License, or (at your option) any later version. > > + * > > + * FFmpeg is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > + * Lesser General Public License for more details. > > + * > > + * You should have received a copy of the GNU Lesser General Public > > + * License along with FFmpeg; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA > > + */ > > + > > +#ifndef AVFORMAT_DOVI_ISOM_H > > +#define AVFORMAT_DOVI_ISOM_H > > + > > +#include "libavutil/dovi_meta.h" > > + > > +#include "avformat.h" > > + > > +#define ISOM_DVCC_DVVC_SIZE 24 > > + > > +int ff_isom_parse_dvcc_dvvc(AVFormatContext *s, AVStream *st, const uint8_t *buf_ptr, uint64_t size); > > +void ff_isom_put_dvcc_dvvc(AVFormatContext *s, uint8_t out[ISOM_DVCC_DVVC_SIZE], > > + AVDOVIDecoderConfigurationRecord *dovi); > > + > > +#endif /* AVFORMAT_DOVI_ISOM_H */ > > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-01-01 4:18 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <20211214153001.2610297-1-tcChlisop0@gmail.com> [not found] ` <20211214153001.2610297-3-tcChlisop0@gmail.com> 2022-01-01 1:30 ` [FFmpeg-devel] [PATCH v10 2/5] avformat/matroska{dec, enc}: Parse BlockAdditionMapping elements Andreas Rheinhardt [not found] ` <20211214153001.2610297-4-tcChlisop0@gmail.com> 2022-01-01 2:06 ` [FFmpeg-devel] [PATCH v10 3/5] avformat/mov: Refactor mov_read_dvcc_dvvc to use ff_isom_parse_dvcc_dvvc Andreas Rheinhardt [not found] ` <20211214153001.2610297-2-tcChlisop0@gmail.com> 2022-01-01 2:16 ` [FFmpeg-devel] [PATCH v10 1/5] avformat/dovi_isom: Implement Dolby Vision configuration parsing/writing Andreas Rheinhardt 2022-01-01 4:17 ` quietvoid [this message] 2022-01-01 7:24 ` Andreas Rheinhardt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CA+Nhy-DYrS6zZ5Em9w+kV-B=40HTqcVCbRzTjk0nTs5uzWxETw@mail.gmail.com' \ --to=tcchlisop0@gmail.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git