From: "He, Fan F" <fan.f.he-at-intel.com@ffmpeg.org>
To: "ffmpeg-devel@ffmpeg.org" <ffmpeg-devel@ffmpeg.org>
Cc: "Ermilov, Dmitry" <dmitry.ermilov@intel.com>
Subject: [FFmpeg-devel] [PATCH] libavcodec/qsvenc: enable LowDelayBRC and MaxFrameSizeI/MaxFrameSizeP for more accurate bitrate control
Date: Thu, 10 Mar 2022 10:11:48 +0000
Message-ID: <BYAPR11MB35599D5D131B706CDEA675DACD0B9@BYAPR11MB3559.namprd11.prod.outlook.com> (raw)
Feature introduction of LowDelayBRC, MaxFrameSizeI and MaxFrameSizeP could be found here:
https://github.com/Intel-Media-SDK/MediaSDK/blob/master/doc/mediasdk-man.md
Signed-off-by: Dmitry Ermilov <dmitry.ermilov@intel.com>
Signed-off-by: Fan F He <fan.f.he@intel.com>
---
doc/encoders.texi | 26 ++++++++++++++++++++++++++
libavcodec/qsvenc.c | 17 +++++++++++++++++
libavcodec/qsvenc.h | 6 ++++++
3 files changed, 49 insertions(+)
diff --git a/doc/encoders.texi b/doc/encoders.texi
index 1bd38671ca..47c8577e09 100644
--- a/doc/encoders.texi
+++ b/doc/encoders.texi
@@ -3264,6 +3264,14 @@ Enable rate distortion optimization.
@item @var{max_frame_size}
Maximum encoded frame size in bytes.
+@item @var{max_frame_size_i}
+Maximum encoded frame size for I frames in bytes. If this value is set as larger
+than zero, then for I frames the value set by max_frame_size is ignored.
+
+@item @var{max_frame_size_p}
+Maximum encoded frame size for P frames in bytes. If this value is set as larger
+than zero, then for P frames the value set by max_frame_size is ignored.
+
@item @var{max_slice_size}
Maximum encoded slice size in bytes.
@@ -3280,6 +3288,11 @@ Setting this flag enables macroblock level bitrate control that generally
improves subjective visual quality. Enabling this flag may have negative impact
on performance and objective visual quality metric.
+@item @var{low_delay_brc}
+Setting this flag turns on or off LowDelayBRC feautre in qsv plugin, which provides
+more accurate bitrate control to minimize the variance of bitstream size frame
+by frame. Value: -1-default 0-off 1-on
+
@item @var{adaptive_i}
This flag controls insertion of I frames by the QSV encoder. Turn ON this flag
to allow changing of frame type from P and B to I.
@@ -3392,6 +3405,14 @@ Enable rate distortion optimization.
@item @var{max_frame_size}
Maximum encoded frame size in bytes.
+@item @var{max_frame_size_i}
+Maximum encoded frame size for I frames in bytes. If this value is set as larger
+than zero, then for I frames the value set by max_frame_size is ignored.
+
+@item @var{max_frame_size_p}
+Maximum encoded frame size for P frames in bytes. If this value is set as larger
+than zero, then for P frames the value set by max_frame_size is ignored.
+
@item @var{max_slice_size}
Maximum encoded slice size in bytes.
@@ -3400,6 +3421,11 @@ Setting this flag enables macroblock level bitrate control that generally
improves subjective visual quality. Enabling this flag may have negative impact
on performance and objective visual quality metric.
+@item @var{low_delay_brc}
+Setting this flag turns on or off LowDelayBRC feautre in qsv plugin, which provides
+more accurate bitrate control to minimize the variance of bitstream size frame
+by frame. Value: -1-default 0-off 1-on
+
@item @var{p_strategy}
Enable P-pyramid: 0-default 1-simple 2-pyramid(bf need to be set to 0).
diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c
index 9b71487666..d5e2c5fb32 100644
--- a/libavcodec/qsvenc.c
+++ b/libavcodec/qsvenc.c
@@ -374,6 +374,13 @@ static void dump_video_param(AVCodecContext *avctx, QSVEncContext *q,
#if QSV_VERSION_ATLEAST(1, 16)
av_log(avctx, AV_LOG_VERBOSE, "IntRefCycleDist: %"PRId16"\n", co3->IntRefCycleDist);
#endif
+#if QSV_VERSION_ATLEAST(1, 23)
+ av_log(avctx, AV_LOG_VERBOSE, "LowDelayBRC: %s\n", print_threestate(co3->LowDelayBRC));
+#endif
+#if QSV_VERSION_ATLEAST(1, 19)
+ av_log(avctx, AV_LOG_VERBOSE, "MaxFrameSizeI: %d; ", co3->MaxFrameSizeI);
+ av_log(avctx, AV_LOG_VERBOSE, "MaxFrameSizeP: %d\n", co3->MaxFrameSizeP);
+#endif
}
static void dump_video_vp9_param(AVCodecContext *avctx, QSVEncContext *q,
@@ -988,6 +995,16 @@ static int init_video_param(AVCodecContext *avctx, QSVEncContext *q)
#if QSV_VERSION_ATLEAST(1, 16)
if (q->int_ref_cycle_dist >= 0)
q->extco3.IntRefCycleDist = q->int_ref_cycle_dist;
+#endif
+#if QSV_VERSION_ATLEAST(1, 23)
+ if (q->low_delay_brc >= 0)
+ q->extco3.LowDelayBRC = q->low_delay_brc ? MFX_CODINGOPTION_ON : MFX_CODINGOPTION_OFF;
+#endif
+#if QSV_VERSION_ATLEAST(1, 19)
+ if (q->max_frame_size_p >= 0)
+ q->extco3.MaxFrameSizeI = q->max_frame_size_i;
+ if (q->max_frame_size_p >= 0)
+ q->extco3.MaxFrameSizeP = q->max_frame_size_p;
#endif
}
diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h
index 2bda858427..5e07580289 100644
--- a/libavcodec/qsvenc.h
+++ b/libavcodec/qsvenc.h
@@ -91,6 +91,8 @@
{ "veryslow", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = MFX_TARGETUSAGE_BEST_QUALITY }, INT_MIN, INT_MAX, VE, "preset" }, \
{ "rdo", "Enable rate distortion optimization", OFFSET(qsv.rdo), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE }, \
{ "max_frame_size", "Maximum encoded frame size in bytes", OFFSET(qsv.max_frame_size), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, UINT16_MAX, VE }, \
+{ "max_frame_size_i", "Maximum encoded I frame size in bytes",OFFSET(qsv.max_frame_size_i), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, UINT16_MAX, VE }, \
+{ "max_frame_size_p", "Maximum encoded P frame size in bytes",OFFSET(qsv.max_frame_size_p), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, UINT16_MAX, VE }, \
{ "max_slice_size", "Maximum encoded slice size in bytes", OFFSET(qsv.max_slice_size), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, UINT16_MAX, VE }, \
{ "bitrate_limit", "Toggle bitrate limitations", OFFSET(qsv.bitrate_limit), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE }, \
{ "mbbrc", "MB level bitrate control", OFFSET(qsv.mbbrc), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, 1, VE }, \
@@ -102,6 +104,7 @@
{ "forced_idr", "Forcing I frames as IDR frames", OFFSET(qsv.forced_idr), AV_OPT_TYPE_BOOL,{ .i64 = 0 }, 0, 1, VE }, \
{ "low_power", "enable low power mode(experimental: many limitations by mfx version, BRC modes, etc.)", OFFSET(qsv.low_power), AV_OPT_TYPE_BOOL, { .i64 = -1}, -1, 1, VE},\
{ "dblk_idc", "This option disable deblocking. It has value in range 0~2.", OFFSET(qsv.dblk_idc), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 2, VE}, \
+{ "low_delay_brc", "Allow to strictly obey avg frame size", OFFSET(qsv.low_delay_brc), AV_OPT_TYPE_BOOL,{ .i64 = -1 }, -1, 1, VE }, \
extern const AVCodecHWConfigInternal *const ff_qsv_enc_hw_configs[];
@@ -173,6 +176,8 @@ typedef struct QSVEncContext {
int vcm;
int rdo;
int max_frame_size;
+ int max_frame_size_i;
+ int max_frame_size_p;
int max_slice_size;
int dblk_idc;
@@ -212,6 +217,7 @@ typedef struct QSVEncContext {
char *load_plugins;
SetEncodeCtrlCB *set_encode_ctrl_cb;
int forced_idr;
+ int low_delay_brc;
} QSVEncContext;
int ff_qsv_enc_init(AVCodecContext *avctx, QSVEncContext *q);
--
2.25.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2022-03-10 10:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-10 10:11 He, Fan F [this message]
2022-03-21 5:03 ` Xiang, Haihao
2022-03-21 5:17 ` "zhilizhao(赵志立)"
2022-03-21 8:01 ` He, Fan F
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BYAPR11MB35599D5D131B706CDEA675DACD0B9@BYAPR11MB3559.namprd11.prod.outlook.com \
--to=fan.f.he-at-intel.com@ffmpeg.org \
--cc=dmitry.ermilov@intel.com \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git