From: "Chen, Wenbin" <wenbin.chen-at-intel.com@ffmpeg.org>
To: FFmpeg development discussions and patches <ffmpeg-devel@ffmpeg.org>
Subject: Re: [FFmpeg-devel] [PATCH] libavcodec/qsvenc: Add min/max QP control options for I/P/B frame
Date: Wed, 25 May 2022 12:44:33 +0000
Message-ID: <BY5PR11MB3879F77FB80E76BB447256F7F8D69@BY5PR11MB3879.namprd11.prod.outlook.com> (raw)
In-Reply-To: <5ae262aece22b9a0e0972b70ceea967eb6d7e9d0.camel@intel.com>
> On Fri, 2022-05-06 at 10:19 +0800, Wenbin Chen wrote:
> > From: Yue Heng <yue.heng@intel.com>
> >
> > To do more accurate QP control, add min/max QP control on I/P/B frame
> > separately to qsv encoder. qmax and qmin still work but newly-added
> > options have higher priority.
> >
> > Signed-off-by: Yue Heng <yue.heng@intel.com>
> > Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
> > ---
> > doc/encoders.texi | 18 ++++++++++++++++++
> > libavcodec/qsvenc.c | 21 +++++++++++++++++++--
> > libavcodec/qsvenc.h | 12 ++++++++++++
> > 3 files changed, 49 insertions(+), 2 deletions(-)
> >
> > diff --git a/doc/encoders.texi b/doc/encoders.texi
> > index 966032a720..86bcdbc04b 100644
> > --- a/doc/encoders.texi
> > +++ b/doc/encoders.texi
> > @@ -3282,6 +3282,24 @@ Forcing I frames as IDR frames.
> >
> > @item @var{low_power}
> > For encoders set this flag to ON to reduce power consumption and GPU
> usage.
> > +
> > +@item @var{max_qp_i}
> > +Maximum video quantizer scale for I frame.
> > +
> > +@item @var{min_qp_i}
> > +Minimum video quantizer scale for I frame.
> > +
> > +@item @var{max_qp_p}
> > +Maximum video quantizer scale for P frame.
> > +
> > +@item @var{min_qp_p}
> > +Minimum video quantizer scale for P frame.
> > +
> > +@item @var{max_qp_b}
> > +Maximum video quantizer scale for B frame.
> > +
> > +@item @var{min_qp_b}
> > +Minimum video quantizer scale for B frame.
> > @end table
> >
>
> Are these common options for all codecs ? If not, could you please update
> your
> patch ?
>
> Thanks
> Haihao
Ok, I will update this patch and submit again.
Thanks
Wenbin
>
> > @subsection H264 options
> > diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c
> > index fbb22ca436..a3e9bb4583 100644
> > --- a/libavcodec/qsvenc.c
> > +++ b/libavcodec/qsvenc.c
> > @@ -930,8 +930,13 @@ static int init_video_param(AVCodecContext
> *avctx,
> > QSVEncContext *q)
> > q->extco2.BRefType = q->b_strategy ? MFX_B_REF_PYRAMID :
> > MFX_B_REF_OFF;
> > #endif
> > #if QSV_VERSION_ATLEAST(1, 9)
> > - if (avctx->qmin >= 0 && avctx->qmax >= 0 && avctx->qmin > avctx-
> > >qmax) {
> > - av_log(avctx, AV_LOG_ERROR, "qmin and or qmax are set but
> > invalid, please make sure min <= max\n");
> > + if ((avctx->qmin >= 0 && avctx->qmax >= 0 && avctx->qmin > avctx-
> > >qmax) ||
> > + (q->max_qp_i >= 0 && q->min_qp_i >= 0 && q->min_qp_i > q-
> > >max_qp_i) ||
> > + (q->max_qp_p >= 0 && q->min_qp_p >= 0 && q->min_qp_p > q-
> > >max_qp_p) ||
> > + (q->max_qp_b >= 0 && q->min_qp_b >= 0 && q->min_qp_b > q-
> > >max_qp_b)) {
> > + av_log(avctx, AV_LOG_ERROR,
> > + "qmin and or qmax are set but invalid,"
> > + " please make sure min <= max\n");
> > return AVERROR(EINVAL);
> > }
> > if (avctx->qmin >= 0) {
> > @@ -942,6 +947,18 @@ static int init_video_param(AVCodecContext
> *avctx,
> > QSVEncContext *q)
> > q->extco2.MaxQPI = avctx->qmax > 51 ? 51 : avctx->qmax;
> > q->extco2.MaxQPP = q->extco2.MaxQPB = q->extco2.MaxQPI;
> > }
> > + if (q->min_qp_i >= 0)
> > + q->extco2.MinQPI = q->min_qp_i > 51 ? 51 : q->min_qp_i;
> > + if (q->max_qp_i >= 0)
> > + q->extco2.MaxQPI = q->max_qp_i > 51 ? 51 : q->max_qp_i;
> > + if (q->min_qp_p >= 0)
> > + q->extco2.MinQPP = q->min_qp_p > 51 ? 51 : q->min_qp_p;
> > + if (q->max_qp_p >= 0)
> > + q->extco2.MaxQPP = q->max_qp_p > 51 ? 51 : q->max_qp_p;
> > + if (q->min_qp_b >= 0)
> > + q->extco2.MinQPB = q->min_qp_b > 51 ? 51 : q->min_qp_b;
> > + if (q->max_qp_b >= 0)
> > + q->extco2.MaxQPB = q->max_qp_b > 51 ? 51 : q->max_qp_b;
> > #endif
> > if (q->mbbrc >= 0)
> > q->extco2.MBBRC = q->mbbrc ? MFX_CODINGOPTION_ON :
> > MFX_CODINGOPTION_OFF;
> > diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h
> > index cb84723dfa..ea05967db5 100644
> > --- a/libavcodec/qsvenc.h
> > +++ b/libavcodec/qsvenc.h
> > @@ -105,6 +105,12 @@
> > { "low_power", "enable low power mode(experimental: many limitations
> by mfx
> > version, BRC modes, etc.)", OFFSET(qsv.low_power), AV_OPT_TYPE_BOOL,
> { .i64 =
> > -1}, -1, 1, VE},\
> > { "dblk_idc", "This option disable deblocking. It has value in range
> > 0~2.", OFFSET(qsv.dblk_idc), AV_OPT_TYPE_INT, { .i64 = 0
> > }, 0, 2, VE}, \
> > { "low_delay_brc", "Allow to strictly obey avg frame size",
> > OFFSET(qsv.low_delay_brc), AV_OPT_TYPE_BOOL,{ .i64 = -1 }, -1, 1,
> VE
> > }, \
> > +{ "max_qp_i", "Maximum video quantizer scale for I
> > frame", OFFSET(qsv.max_qp_i), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> > 1, 51, VE}, \
> > +{ "min_qp_i", "Minimum video quantizer scale for I
> > frame", OFFSET(qsv.min_qp_i), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> > 1, 51, VE}, \
> > +{ "max_qp_p", "Maximum video quantizer scale for P
> > frame", OFFSET(qsv.max_qp_p), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> > 1, 51, VE}, \
> > +{ "min_qp_p", "Minimum video quantizer scale for P
> > frame", OFFSET(qsv.min_qp_p), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> > 1, 51, VE}, \
> > +{ "max_qp_b", "Maximum video quantizer scale for B
> > frame", OFFSET(qsv.max_qp_b), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> > 1, 51, VE}, \
> > +{ "min_qp_b", "Minimum video quantizer scale for B
> > frame", OFFSET(qsv.min_qp_b), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> > 1, 51, VE}, \
> >
> > extern const AVCodecHWConfigInternal *const ff_qsv_enc_hw_configs[];
> >
> > @@ -218,6 +224,12 @@ typedef struct QSVEncContext {
> > SetEncodeCtrlCB *set_encode_ctrl_cb;
> > int forced_idr;
> > int low_delay_brc;
> > + int max_qp_i;
> > + int min_qp_i;
> > + int max_qp_p;
> > + int min_qp_p;
> > + int max_qp_b;
> > + int min_qp_b;
> > } QSVEncContext;
> >
> > int ff_qsv_enc_init(AVCodecContext *avctx, QSVEncContext *q);
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
prev parent reply other threads:[~2022-05-25 12:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-06 2:19 Wenbin Chen
2022-05-25 7:26 ` Xiang, Haihao
2022-05-25 12:44 ` Chen, Wenbin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BY5PR11MB3879F77FB80E76BB447256F7F8D69@BY5PR11MB3879.namprd11.prod.outlook.com \
--to=wenbin.chen-at-intel.com@ffmpeg.org \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git