From: "Chen, Wenbin" <wenbin.chen-at-intel.com@ffmpeg.org> To: "ffmpeg-devel@ffmpeg.org" <ffmpeg-devel@ffmpeg.org> Cc: "Xiang, Haihao" <haihao.xiang@intel.com> Subject: Re: [FFmpeg-devel] [PATCH 1/3] libavcodec/vaapi_encode: Change the way to call async to increase performance Date: Mon, 27 Dec 2021 07:41:17 +0000 Message-ID: <BY5PR11MB3879AC4C47615A5A7A88AB2AF8429@BY5PR11MB3879.namprd11.prod.outlook.com> (raw) In-Reply-To: <3951cdd4c13cef34c48d76694b1f784511f4671f.camel@intel.com> > On Wed, 2021-10-27 at 16:57 +0800, Wenbin Chen wrote: > > Fix: #7706. After commit 5fdcf85bbffe7451c2, vaapi encoder's performance > > decrease. The reason is that vaRenderPicture() and vaSyncSurface() are > > called at the same time (vaRenderPicture() always followed by a > > vaSyncSurface()). When we encode stream with B frames, we need buffer > to > > reorder frames, so we can send serveral frames to HW at once to increase > > performance. Now I changed them to be called in a > > asynchronous way, which will make better use of hardware. > > 1080p transcoding increases about 17% fps on my environment. > > Could you provide your command ? I'd like to have a try. > > Thanks > Haihao Here is my command: ffmpeg -hwaccel vaapi -hwaccel_output_format vaapi -i input.264 -c:v h264_vaapi output.264 Thanks Wenbin > > > > > Signed-off-by: Wenbin Chen <wenbin.chen@intel.com> > > --- > > libavcodec/vaapi_encode.c | 41 ++++++++++++++++++++++++++++----------- > > libavcodec/vaapi_encode.h | 3 +++ > > 2 files changed, 33 insertions(+), 11 deletions(-) > > > > diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c > > index ec054ae701..5927849233 100644 > > --- a/libavcodec/vaapi_encode.c > > +++ b/libavcodec/vaapi_encode.c > > @@ -951,8 +951,10 @@ static int > vaapi_encode_pick_next(AVCodecContext *avctx, > > if (!pic && ctx->end_of_stream) { > > --b_counter; > > pic = ctx->pic_end; > > - if (pic->encode_issued) > > + if (pic->encode_complete) > > return AVERROR_EOF; > > + else if (pic->encode_issued) > > + return AVERROR(EAGAIN); > > } > > > > if (!pic) { > > @@ -1177,20 +1179,31 @@ int > ff_vaapi_encode_receive_packet(AVCodecContext > > *avctx, AVPacket *pkt) > > return AVERROR(EAGAIN); > > } > > > > - pic = NULL; > > - err = vaapi_encode_pick_next(avctx, &pic); > > - if (err < 0) > > - return err; > > - av_assert0(pic); > > + while (av_fifo_size(ctx->encode_fifo) <= MAX_PICTURE_REFERENCES * > > sizeof(VAAPIEncodePicture *)) { > > + pic = NULL; > > + err = vaapi_encode_pick_next(avctx, &pic); > > + if (err < 0) > > + break; > > + av_assert0(pic); > > > > - pic->encode_order = ctx->encode_order++; > > + pic->encode_order = ctx->encode_order + > > + (av_fifo_size(ctx->encode_fifo) / > > sizeof(VAAPIEncodePicture *)); > > > > - err = vaapi_encode_issue(avctx, pic); > > - if (err < 0) { > > - av_log(avctx, AV_LOG_ERROR, "Encode failed: %d.\n", err); > > - return err; > > + err = vaapi_encode_issue(avctx, pic); > > + if (err < 0) { > > + av_log(avctx, AV_LOG_ERROR, "Encode failed: %d.\n", err); > > + return err; > > + } > > + > > + av_fifo_generic_write(ctx->encode_fifo, &pic, sizeof(pic), NULL); > > } > > > > + if (!av_fifo_size(ctx->encode_fifo)) > > + return err; > > + > > + av_fifo_generic_read(ctx->encode_fifo, &pic, sizeof(pic), NULL); > > + ctx->encode_order = pic->encode_order + 1; > > + > > err = vaapi_encode_output(avctx, pic, pkt); > > if (err < 0) { > > av_log(avctx, AV_LOG_ERROR, "Output failed: %d.\n", err); > > @@ -2520,6 +2533,11 @@ av_cold int > ff_vaapi_encode_init(AVCodecContext *avctx) > > } > > } > > > > + ctx->encode_fifo = av_fifo_alloc((MAX_PICTURE_REFERENCES + 1) * > > + sizeof(VAAPIEncodePicture *)); > > + if (!ctx->encode_fifo) > > + return AVERROR(ENOMEM); > > + > > return 0; > > > > fail: > > @@ -2552,6 +2570,7 @@ av_cold int > ff_vaapi_encode_close(AVCodecContext *avctx) > > > > av_freep(&ctx->codec_sequence_params); > > av_freep(&ctx->codec_picture_params); > > + av_fifo_freep(&ctx->encode_fifo); > > > > av_buffer_unref(&ctx->recon_frames_ref); > > av_buffer_unref(&ctx->input_frames_ref); > > diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h > > index b41604a883..89fe8de466 100644 > > --- a/libavcodec/vaapi_encode.h > > +++ b/libavcodec/vaapi_encode.h > > @@ -29,6 +29,7 @@ > > > > #include "libavutil/hwcontext.h" > > #include "libavutil/hwcontext_vaapi.h" > > +#include "libavutil/fifo.h" > > > > #include "avcodec.h" > > #include "hwconfig.h" > > @@ -345,6 +346,8 @@ typedef struct VAAPIEncodeContext { > > int roi_warned; > > > > AVFrame *frame; > > + > > + AVFifoBuffer *encode_fifo; > > } VAAPIEncodeContext; > > > > enum { _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2021-12-27 7:41 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <20211027085705.4114165-1-wenbin.chen@intel.com> [not found] ` <20211027085705.4114165-3-wenbin.chen@intel.com> [not found] ` <DM4PR11MB52946A90C16BC74C6A6DF492F88A9@DM4PR11MB5294.namprd11.prod.outlook.com> 2021-12-24 23:22 ` [FFmpeg-devel] [PATCH 3/3] libavcodec/vaapi_encode: Add async_depth to vaapi_encoder " Ed Martin 2021-12-25 5:49 ` Dennis Mungai 2021-12-27 7:22 ` [FFmpeg-devel] [PATCH 1/3] libavcodec/vaapi_encode: Change the way to call async " Xiang, Haihao 2021-12-27 7:41 ` Chen, Wenbin [this message] 2021-12-27 18:31 ` Mark Thompson 2021-12-28 2:05 ` Chen, Wenbin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=BY5PR11MB3879AC4C47615A5A7A88AB2AF8429@BY5PR11MB3879.namprd11.prod.outlook.com \ --to=wenbin.chen-at-intel.com@ffmpeg.org \ --cc=ffmpeg-devel@ffmpeg.org \ --cc=haihao.xiang@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git