From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To: ffmpeg-devel@ffmpeg.org
Cc: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Subject: [FFmpeg-devel] [PATCH 22/32] fate/seek: Don't duplicate test requirements
Date: Sun, 24 Apr 2022 05:34:07 +0200
Message-ID: <AS8PR01MB794478A2E3A86B48A008C42A8FF99@AS8PR01MB7944.eurprd01.prod.exchangelabs.com> (raw)
In-Reply-To: <AS8PR01MB794466793DDE565DD5B8A1DD8FF99@AS8PR01MB7944.eurprd01.prod.exchangelabs.com>
Most of the tests in seek.mak use files created by other tests
as input. Therefore these tests have the other tests as prerequisite
and duplicate their CONFIG-requirements. This duplication is of course
bad as usual, so stop it by using the corresponding variable
that contains the non-seek-tests that are enabled to filter out all
the seek-tests without a corresponding enabled non-seek test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
---
tests/Makefile | 1 +
tests/fate/seek.mak | 189 ++++++++++++++++----------------------------
2 files changed, 68 insertions(+), 122 deletions(-)
diff --git a/tests/Makefile b/tests/Makefile
index 1c9e3594c0..e02eb57035 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -120,6 +120,7 @@ include $(SRC_PATH)/tests/fate/lavf-container.mak
include $(SRC_PATH)/tests/fate/lavf-image.mak
include $(SRC_PATH)/tests/fate/lavf-image2pipe.mak
include $(SRC_PATH)/tests/fate/lavf-video.mak
+# Must be included after acodec.mak, vcodec.mak and lavf-*.mak
include $(SRC_PATH)/tests/fate/seek.mak
include $(SRC_PATH)/tests/fate/aac.mak
diff --git a/tests/fate/seek.mak b/tests/fate/seek.mak
index b4e9246cc3..fc1ef50e49 100644
--- a/tests/fate/seek.mak
+++ b/tests/fate/seek.mak
@@ -1,32 +1,16 @@
# files from fate-acodec
-FATE_SEEK_ACODEC-$(call ENCDEC, ADPCM_IMA_QT, AIFF) += adpcm-ima_qt \
- adpcm-ima_qt-trellis
-FATE_SEEK_ACODEC-$(call ENCDEC, ADPCM_IMA_WAV, WAV) += adpcm-ima_wav \
- adpcm-ima_wav-trellis
-FATE_SEEK_ACODEC-$(call ENCDEC, ADPCM_MS, WAV) += adpcm-ms \
- adpcm-ms-trellis
-FATE_SEEK_ACODEC-$(call ENCDEC, ADPCM_SWF, FLV) += adpcm-swf \
- adpcm-swf-trellis
-FATE_SEEK_ACODEC-$(call ENCDEC, ADPCM_YAMAHA, WAV) += adpcm-yamaha \
- adpcm-yamaha-trellis
-FATE_SEEK_ACODEC-$(call ENCDEC, ALAC, MOV) += alac
-FATE_SEEK_ACODEC-$(call ENCDEC, FLAC, FLAC) += flac
-FATE_SEEK_ACODEC-$(call ENCDEC, MP2, MP2 MP3) += mp2
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_ALAW, WAV) += pcm-alaw
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_MULAW, WAV) += pcm-mulaw
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_S8, MOV) += pcm-s8
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_U8, WAV) += pcm-u8
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_S16BE, MOV) += pcm-s16be
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_S16LE, WAV) += pcm-s16le
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_S24BE, MOV) += pcm-s24be
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_S24LE, WAV) += pcm-s24le
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_S32BE, MOV) += pcm-s32be
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_S32LE, WAV) += pcm-s32le
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_F32BE, AU) += pcm-f32be
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_F32LE, WAV) += pcm-f32le
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_F64BE, AU) += pcm-f64be
-FATE_SEEK_ACODEC-$(call ENCDEC, PCM_F64LE, WAV) += pcm-f64le
+FATE_SEEK_ACODEC += adpcm-ima_qt adpcm-ima_qt-trellis \
+ adpcm-ima_wav adpcm-ima_wav-trellis \
+ adpcm-ms adpcm-ms-trellis \
+ adpcm-swf adpcm-swf-trellis \
+ adpcm-yamaha adpcm-yamaha-trellis \
+ alac flac mp2 \
+ pcm-alaw pcm-mulaw pcm-s8 pcm-u8 \
+ pcm-s16be pcm-s16le pcm-s24be \
+ pcm-s24le pcm-s32be pcm-s32le \
+ pcm-f32be pcm-f32le pcm-f64be \
+ pcm-f64le \
fate-seek-acodec-adpcm-ima_qt: SRC = fate/acodec-adpcm-ima_qt.aiff
fate-seek-acodec-adpcm-ima_wav: SRC = fate/acodec-adpcm-ima_wav.wav
@@ -56,57 +40,37 @@ fate-seek-acodec-pcm-s32le: SRC = fate/acodec-pcm-s32le.wav
fate-seek-acodec-pcm-s8: SRC = fate/acodec-pcm-s8.mov
fate-seek-acodec-pcm-u8: SRC = fate/acodec-pcm-u8.wav
-FATE_SEEK += $(FATE_SEEK_ACODEC-yes:%=fate-seek-acodec-%)
+FATE_SEEK_ACODEC := $(FATE_SEEK_ACODEC:%=fate-seek-acodec-%)
+# The following disables every fate-seek-* test whose
+# corresponding fate-* test has unmet requirements (or is disabled).
+FATE_SEEK_ACODEC := $(filter $(subst fate-,fate-seek-,$(FATE_ACODEC)), $(FATE_SEEK_ACODEC))
+FATE_SEEK += $(FATE_SEEK_ACODEC)
# files from fate-vsynth_lena
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, ASV1, AVI) += asv1
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, ASV2, AVI) += asv2
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, DNXHD, DNXHD) += dnxhd-720p
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, DNXHD, DNXHD) += dnxhd-720p-rd
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, DNXHD, MOV) += dnxhd-1080i
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, DVVIDEO, DV) += dv
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, DVVIDEO, DV) += dv-411
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, DVVIDEO, DV) += dv-50
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, FFV1, AVI) += ffv1
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, FLASHSV, FLV) += flashsv
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, FLV, FLV) += flv
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, H261, AVI) += h261
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, H263, AVI) += h263
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, H263, AVI) += h263p
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, HUFFYUV, AVI) += huffyuv
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, JPEGLS, AVI) += jpegls
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, LJPEG MJPEG, AVI) += ljpeg
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, MJPEG, AVI) += mjpeg
-
-FATE_SEEK_VSYNTH_LENA-$(call ALLYES, DNXHD_ENCODER DNXHD_DECODER LARGE_TESTS) += dnxhd-4k-hr-lb
-
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, MPEG1VIDEO, MPEG1VIDEO MPEGVIDEO) += \
- mpeg1 \
- mpeg1b
-
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, MPEG2VIDEO, MPEG2VIDEO MPEGVIDEO) += \
- mpeg2-422 \
- mpeg2-idct-int \
- mpeg2-ilace \
- mpeg2-ivlc-qprd \
- mpeg2-thread \
- mpeg2-thread-ivlc
-
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, MPEG4, MP4 MOV) += mpeg4
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, MPEG4, AVI) += $(FATE_MPEG4_AVI)
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, MSMPEG4V3, AVI) += msmpeg4
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, MSMPEG4V2, AVI) += msmpeg4v2
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, RAWVIDEO, AVI) += rgb
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, ROQ, ROQ) += roqvideo
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, RV10, RM) += rv10
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, RV20, RM) += rv20
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, SNOW, AVI) += snow
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, SNOW, AVI) += snow-ll
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, SVQ1, MOV) += svq1
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, WMV1, AVI) += wmv1
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, WMV2, AVI) += wmv2
-FATE_SEEK_VSYNTH_LENA-$(call ENCDEC, RAWVIDEO, AVI) += yuv
+FATE_SEEK_VSYNTH_LENA += asv1 asv2 \
+ dnxhd-720p dnxhd-720p-rd \
+ dnxhd-1080i dnxhd-4k-hr-lb \
+ dv dv-411 dv-50 \
+ ffv1 \
+ flashsv \
+ flv \
+ h261 h263 h263p \
+ huffyuv \
+ jpegls ljpeg mjpeg \
+ mpeg1 mpeg1b \
+ mpeg2-422 mpeg2-idct-int \
+ mpeg2-ilace mpeg2-ivlc-qprd \
+ mpeg2-thread mpeg2-thread-ivlc \
+ mpeg4 $(FATE_MPEG4_AVI) \
+ msmpeg4 msmpeg4v2 \
+ rgb \
+ roqvideo \
+ rv10 rv20 \
+ snow snow-ll \
+ svq1 \
+ wmv1 wmv2 \
+ yuv \
fate-seek-vsynth_lena-asv1: SRC = fate/vsynth_lena-asv1.avi
fate-seek-vsynth_lena-asv2: SRC = fate/vsynth_lena-asv2.avi
@@ -158,78 +122,59 @@ fate-seek-vsynth_lena-wmv1: SRC = fate/vsynth_lena-wmv1.avi
fate-seek-vsynth_lena-wmv2: SRC = fate/vsynth_lena-wmv2.avi
fate-seek-vsynth_lena-yuv: SRC = fate/vsynth_lena-yuv.avi
-FATE_SAMPLES_SEEK += $(FATE_SEEK_VSYNTH_LENA-yes:%=fate-seek-vsynth_lena-%)
+FATE_SEEK_VSYNTH_LENA := $(FATE_SEEK_VSYNTH_LENA:%=fate-seek-vsynth_lena-%)
+FATE_SEEK_VSYNTH_LENA := $(filter $(subst fate-,fate-seek-,$(FATE_VSYNTH_LENA)), $(FATE_SEEK_VSYNTH_LENA))
+FATE_SAMPLES_SEEK += $(FATE_SEEK_VSYNTH_LENA)
# files from fate-lavf-audio
-FATE_SEEK_LAVF_AUDIO-$(call ENCDEC, PCM_S16BE, AIFF) += aiff
-FATE_SEEK_LAVF_AUDIO-$(call ENCDEC, PCM_ALAW, PCM_ALAW) += al
-FATE_SEEK_LAVF_AUDIO-$(call ENCDEC, PCM_S16BE, AU) += au
-FATE_SEEK_LAVF_AUDIO-$(call ENCDEC, ADPCM_YAMAHA, MMF) += mmf
-FATE_SEEK_LAVF_AUDIO-$(call ENCDEC, PCM_MULAW, PCM_MULAW) += ul
-FATE_SEEK_LAVF_AUDIO-$(call ENCDEC, FLAC, OGG) += ogg
-FATE_SEEK_LAVF_AUDIO-$(call ENCDEC, PCM_U8, VOC) += voc
-FATE_SEEK_LAVF_AUDIO-$(call ENCDEC, PCM_S16LE, WAV) += wav
+FATE_SEEK_LAVF_AUDIO += aiff al au mmf ogg ul voc wav
-FATE_SEEK_LAVF_AUDIO := $(FATE_SEEK_LAVF_AUDIO-yes:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_AUDIO := $(FATE_SEEK_LAVF_AUDIO:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_AUDIO := $(filter $(subst fate-,fate-seek-,$(FATE_LAVF_AUDIO)), $(FATE_SEEK_LAVF_AUDIO))
FATE_SEEK += $(FATE_SEEK_LAVF_AUDIO)
# files from fate-lavf-container
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MSMPEG4V3, MP2, ASF) += asf
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MPEG4, MP2, AVI) += avi
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, DVVIDEO, PCM_S16LE, AVI) += dv
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC, FLV, FLV) += flv
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MPEG2VIDEO, PCM_S16LE, GXF) += gxf
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MPEG4, MP2, MATROSKA) += mkv
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MPEG4, PCM_ALAW, MOV) += mov
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MPEG1VIDEO, MP2, MPEG1SYSTEM MPEGPS) += mpg
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MPEG2VIDEO, PCM_S16LE, MXF) += mxf
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MPEG2VIDEO, PCM_S16LE, MXF_D10 MXF) += mxf_d10
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, DVVIDEO, PCM_S16LE, MXF) += mxf_dv25
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, DVVIDEO, PCM_S16LE, MXF) += mxf_dvcpro50
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, DNXHD, PCM_S16LE, MXF_OPATOM MXF) += mxf_opatom
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, DNXHD, PCM_S16LE, MXF_OPATOM MXF) += mxf_opatom_audio
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MPEG4, MP2, NUT) += nut
-FATE_SEEK_LAVF_CONTAINER-$(call ENCMUX, RV10 AC3_FIXED, RM) += rm
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC, FLV, SWF) += swf
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC2, MPEG2VIDEO, MP2, MPEGTS) += ts
-FATE_SEEK_LAVF_CONTAINER-$(call ENCDEC, MP2, WTV) += wtv
-
-FATE_SEEK_LAVF_CONTAINER := $(FATE_SEEK_LAVF_CONTAINER-yes:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_CONTAINER += asf avi dv flv gxf mkv mov mpg \
+ mxf mxf_d10 mxf_dv25 mxf_dvcpro50 \
+ mxf_opatom mxf_opatom_audio \
+ nut swf ts wtv
+# rm is special: fate-lavf-rm does not read the created file
+# and therefore does not require the corresponding demuxer
+# to be present, so we have to explicitly check for this here.
+FATE_SEEK_LAVF_CONTAINER-$(CONFIG_RM_DEMUXER) += rm
+FATE_SEEK_LAVF_CONTAINER += $(FATE_SEEK_LAVF_CONTAINER-yes)
+
+FATE_SEEK_LAVF_CONTAINER := $(FATE_SEEK_LAVF_CONTAINER:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_CONTAINER := $(filter $(subst fate-,fate-seek-,$(FATE_LAVF_CONTAINER)), $(FATE_SEEK_LAVF_CONTAINER))
FATE_SEEK += $(FATE_SEEK_LAVF_CONTAINER)
# files from fate-lavf-video
-FATE_SEEK_LAVF_VIDEO-$(call ENCDEC, GIF, IMAGE2) += gif
-FATE_SEEK_LAVF_VIDEO-$(CONFIG_YUV4MPEGPIPE_MUXER) += y4m
+FATE_SEEK_LAVF_VIDEO += gif y4m
-FATE_SEEK_LAVF_VIDEO := $(FATE_SEEK_LAVF_VIDEO-yes:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_VIDEO := $(FATE_SEEK_LAVF_VIDEO:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_VIDEO := $(filter $(subst fate-,fate-seek-,$(FATE_LAVF_VIDEO)), $(FATE_SEEK_LAVF_VIDEO))
FATE_SEEK += $(FATE_SEEK_LAVF_VIDEO)
+
$(FATE_SEEK_LAVF_AUDIO) $(FATE_SEEK_LAVF_CONTAINER) $(FATE_SEEK_LAVF_VIDEO): SRC = lavf/lavf.$(@:fate-seek-lavf-%=%)
# files from fate-lavf-image
-FATE_SEEK_LAVF_IMAGE-$(call ENCDEC, BMP, IMAGE2) += bmp
-FATE_SEEK_LAVF_IMAGE-$(call ENCDEC, MJPEG, IMAGE2) += jpg
-FATE_SEEK_LAVF_IMAGE-$(call ENCDEC, PCX, IMAGE2) += pcx
-FATE_SEEK_LAVF_IMAGE-$(call ENCDEC, PGM, IMAGE2) += pgm
-FATE_SEEK_LAVF_IMAGE-$(call ENCDEC, PPM, IMAGE2) += ppm
-FATE_SEEK_LAVF_IMAGE-$(call ENCDEC, SGI, IMAGE2) += sgi
-FATE_SEEK_LAVF_IMAGE-$(call ENCDEC, TARGA, IMAGE2) += tga
-FATE_SEEK_LAVF_IMAGE-$(call ENCDEC, TIFF, IMAGE2) += tiff
+FATE_SEEK_LAVF_IMAGE += bmp jpg pcx pgm ppm sgi tga tiff
-FATE_SEEK_LAVF_IMAGE := $(FATE_SEEK_LAVF_IMAGE-yes:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_IMAGE := $(FATE_SEEK_LAVF_IMAGE:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_IMAGE := $(filter $(subst fate-,fate-seek-,$(FATE_LAVF_IMAGES)), $(FATE_SEEK_LAVF_IMAGE))
$(FATE_SEEK_LAVF_IMAGE): SRC = images/$(@:fate-seek-lavf-%=%)/%02d.$(@:fate-seek-lavf-%=%)
FATE_SEEK += $(FATE_SEEK_LAVF_IMAGE)
#files from fate-lavf-image2pipe
-FATE_SEEK_LAVF_IMAGE2PIPE-$(call ENCDEC, PBM, IMAGE2PIPE) += pbmpipe
-FATE_SEEK_LAVF_IMAGE2PIPE-$(call ENCDEC, PGM, IMAGE2PIPE) += pgmpipe
-FATE_SEEK_LAVF_IMAGE2PIPE-$(call ENCDEC, PPM, IMAGE2PIPE) += ppmpipe
+FATE_SEEK_LAVF_IMAGE2PIPE += pbmpipe pgmpipe ppmpipe
-FATE_SEEK_LAVF_IMAGE2PIPE := $(FATE_SEEK_LAVF_IMAGE2PIPE-yes:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_IMAGE2PIPE := $(FATE_SEEK_LAVF_IMAGE2PIPE:%=fate-seek-lavf-%)
+FATE_SEEK_LAVF_IMAGE2PIPE := $(filter $(subst fate-,fate-seek-,$(FATE_LAVF_IMAGE2PIPE)), $(FATE_SEEK_LAVF_IMAGE2PIPE))
$(FATE_SEEK_LAVF_IMAGE2PIPE): SRC = lavf/$(@:fate-seek-lavf-%pipe=%)pipe.$(@:fate-seek-lavf-%pipe=%)
FATE_SEEK += $(FATE_SEEK_LAVF_IMAGE2PIPE)
--
2.32.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-04-24 3:37 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-24 3:29 [FFmpeg-devel] [PATCH 01/32] fate/matroska: Use REMUX and TRANSCODE where appropriate Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 02/32] fate/id3v2: Use REMUX " Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 03/32] fate/amr[nw]b: " Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 04/32] fate/caf: " Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 05/32] fate/mov: Use REMUX and TRANSCODE " Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 06/32] fate/lavf-image: Fix requirements of tests Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 07/32] tests/Makefile: Make DEMDEC etc. auxiliary functions more flexible Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 08/32] fate/image: Fix requirements of tests Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 09/32] tests/Makefile: Add FRAMECRC function Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 10/32] fate/screen: Fix test requirements Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 11/32] fate/video: " Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 12/32] fate/dfa: " Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 13/32] fate/cdxl: " Andreas Rheinhardt
2022-04-24 3:33 ` [FFmpeg-devel] [PATCH 14/32] fate/bmp: " Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 15/32] fate/utvideo: " Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 16/32] fate/fits: " Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 17/32] fate/fits: Use transcode for transcode-like test Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 18/32] avformat/fitsenc: Simplify writing header padding Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 19/32] fate/speedhq: Fix test requirements Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 20/32] tests/fate-run: Remove intermediate lavf_container_fate files Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 21/32] fate/seek: Avoid list of source files Andreas Rheinhardt
2022-04-24 3:34 ` Andreas Rheinhardt [this message]
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 23/32] fate/vcodec: Don't add scale filter unnecessarily Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 24/32] fate/vcodec: Fix test requirements Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 25/32] fate/acodec: " Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 26/32] fate/acodec: Remove acodec-adpcm-adx-trellis test Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 27/32] avformat/format: Also search for image2-codecs for image2pipe Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 28/32] fate/lavf-image2pipe: Fix test requirements Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 29/32] fate/lavf-video: " Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 30/32] fate/lavf-audio: Fix requirements of tests Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 31/32] fate/lavf-container: Fix test requirements Andreas Rheinhardt
2022-04-24 3:34 ` [FFmpeg-devel] [PATCH 32/32] fate/concatdec: Don't duplicate " Andreas Rheinhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AS8PR01MB794478A2E3A86B48A008C42A8FF99@AS8PR01MB7944.eurprd01.prod.exchangelabs.com \
--to=andreas.rheinhardt@outlook.com \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git