* [FFmpeg-devel] [PATCH] avcodec/eac3dec: remove function duplicates
@ 2023-05-11 18:02 James Almer
2023-05-11 18:16 ` Andreas Rheinhardt
0 siblings, 1 reply; 3+ messages in thread
From: James Almer @ 2023-05-11 18:02 UTC (permalink / raw)
To: ffmpeg-devel
Thee are not part of the float/fixed ac3 template distinction.
Signed-off-by: James Almer <jamrial@gmail.com>
---
libavcodec/Makefile | 2 +-
libavcodec/ac3dec.h | 6 +++---
libavcodec/ac3dec_fixed.c | 1 -
libavcodec/ac3dec_float.c | 1 -
libavcodec/eac3dec.c | 6 +++---
5 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/libavcodec/Makefile b/libavcodec/Makefile
index 3cf4444b7e..deaf233021 100644
--- a/libavcodec/Makefile
+++ b/libavcodec/Makefile
@@ -336,7 +336,7 @@ OBJS-$(CONFIG_DVVIDEO_ENCODER) += dvenc.o dv.o dvdata.o
OBJS-$(CONFIG_DXA_DECODER) += dxa.o
OBJS-$(CONFIG_DXTORY_DECODER) += dxtory.o
OBJS-$(CONFIG_DXV_DECODER) += dxv.o
-OBJS-$(CONFIG_EAC3_DECODER) += eac3_data.o
+OBJS-$(CONFIG_EAC3_DECODER) += eac3dec.o eac3_data.o
OBJS-$(CONFIG_EAC3_ENCODER) += eac3enc.o eac3_data.o
OBJS-$(CONFIG_EACMV_DECODER) += eacmv.o
OBJS-$(CONFIG_EAMAD_DECODER) += eamad.o eaidct.o mpeg12.o \
diff --git a/libavcodec/ac3dec.h b/libavcodec/ac3dec.h
index 98de7b5abf..99729adf0d 100644
--- a/libavcodec/ac3dec.h
+++ b/libavcodec/ac3dec.h
@@ -259,20 +259,20 @@ typedef struct AC3DecodeContext {
* Parse the E-AC-3 frame header.
* This parses both the bit stream info and audio frame header.
*/
-static int ff_eac3_parse_header(AC3DecodeContext *s);
+int ff_eac3_parse_header(AC3DecodeContext *s);
/**
* Decode mantissas in a single channel for the entire frame.
* This is used when AHT mode is enabled.
*/
-static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
+void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
/**
* Apply spectral extension to each channel by copying lower frequency
* coefficients to higher frequency bins and applying side information to
* approximate the original high frequency signal.
*/
-static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
+void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
#if (!USE_FIXED)
extern float ff_ac3_heavy_dynamic_range_tab[256];
diff --git a/libavcodec/ac3dec_fixed.c b/libavcodec/ac3dec_fixed.c
index c9e5cda69c..0909c363f2 100644
--- a/libavcodec/ac3dec_fixed.c
+++ b/libavcodec/ac3dec_fixed.c
@@ -152,7 +152,6 @@ static void ac3_downmix_c_fixed16(int16_t **samples, int16_t **matrix,
}
}
-#include "eac3dec.c"
#include "ac3dec.c"
static const AVOption options[] = {
diff --git a/libavcodec/ac3dec_float.c b/libavcodec/ac3dec_float.c
index 39d3cbd282..9756829643 100644
--- a/libavcodec/ac3dec_float.c
+++ b/libavcodec/ac3dec_float.c
@@ -34,7 +34,6 @@
#include "ac3dec.h"
#include "codec_internal.h"
#include "profiles.h"
-#include "eac3dec.c"
#include "ac3dec.c"
static const AVOption options[] = {
diff --git a/libavcodec/eac3dec.c b/libavcodec/eac3dec.c
index 5c71751a0c..491f663d3e 100644
--- a/libavcodec/eac3dec.c
+++ b/libavcodec/eac3dec.c
@@ -55,7 +55,7 @@ typedef enum {
#define EAC3_SR_CODE_REDUCED 3
-static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
+void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
{
int bin, bnd, ch, i;
uint8_t wrapflag[SPX_MAX_BANDS]={1,0,}, num_copy_sections, copy_sizes[SPX_MAX_BANDS];
@@ -194,7 +194,7 @@ static void idct6(int pre_mant[6])
pre_mant[5] = even0 - odd0;
}
-static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
+void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
{
int bin, blk, gs;
int end_bap, gaq_mode;
@@ -287,7 +287,7 @@ static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
}
}
-static int ff_eac3_parse_header(AC3DecodeContext *s)
+int ff_eac3_parse_header(AC3DecodeContext *s)
{
int i, blk, ch;
int ac3_exponent_strategy, parse_aht_info, parse_spx_atten_data;
--
2.40.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [FFmpeg-devel] [PATCH] avcodec/eac3dec: remove function duplicates
2023-05-11 18:02 [FFmpeg-devel] [PATCH] avcodec/eac3dec: remove function duplicates James Almer
@ 2023-05-11 18:16 ` Andreas Rheinhardt
2023-05-11 18:32 ` James Almer
0 siblings, 1 reply; 3+ messages in thread
From: Andreas Rheinhardt @ 2023-05-11 18:16 UTC (permalink / raw)
To: ffmpeg-devel
James Almer:
> Thee are not part of the float/fixed ac3 template distinction.
>
> Signed-off-by: James Almer <jamrial@gmail.com>
> ---
> libavcodec/Makefile | 2 +-
> libavcodec/ac3dec.h | 6 +++---
> libavcodec/ac3dec_fixed.c | 1 -
> libavcodec/ac3dec_float.c | 1 -
> libavcodec/eac3dec.c | 6 +++---
> 5 files changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/libavcodec/Makefile b/libavcodec/Makefile
> index 3cf4444b7e..deaf233021 100644
> --- a/libavcodec/Makefile
> +++ b/libavcodec/Makefile
> @@ -336,7 +336,7 @@ OBJS-$(CONFIG_DVVIDEO_ENCODER) += dvenc.o dv.o dvdata.o
> OBJS-$(CONFIG_DXA_DECODER) += dxa.o
> OBJS-$(CONFIG_DXTORY_DECODER) += dxtory.o
> OBJS-$(CONFIG_DXV_DECODER) += dxv.o
> -OBJS-$(CONFIG_EAC3_DECODER) += eac3_data.o
> +OBJS-$(CONFIG_EAC3_DECODER) += eac3dec.o eac3_data.o
> OBJS-$(CONFIG_EAC3_ENCODER) += eac3enc.o eac3_data.o
> OBJS-$(CONFIG_EACMV_DECODER) += eacmv.o
> OBJS-$(CONFIG_EAMAD_DECODER) += eamad.o eaidct.o mpeg12.o \
> diff --git a/libavcodec/ac3dec.h b/libavcodec/ac3dec.h
> index 98de7b5abf..99729adf0d 100644
> --- a/libavcodec/ac3dec.h
> +++ b/libavcodec/ac3dec.h
> @@ -259,20 +259,20 @@ typedef struct AC3DecodeContext {
> * Parse the E-AC-3 frame header.
> * This parses both the bit stream info and audio frame header.
> */
> -static int ff_eac3_parse_header(AC3DecodeContext *s);
> +int ff_eac3_parse_header(AC3DecodeContext *s);
>
> /**
> * Decode mantissas in a single channel for the entire frame.
> * This is used when AHT mode is enabled.
> */
> -static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
> +void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
>
> /**
> * Apply spectral extension to each channel by copying lower frequency
> * coefficients to higher frequency bins and applying side information to
> * approximate the original high frequency signal.
> */
> -static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
> +void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
>
> #if (!USE_FIXED)
> extern float ff_ac3_heavy_dynamic_range_tab[256];
> diff --git a/libavcodec/ac3dec_fixed.c b/libavcodec/ac3dec_fixed.c
> index c9e5cda69c..0909c363f2 100644
> --- a/libavcodec/ac3dec_fixed.c
> +++ b/libavcodec/ac3dec_fixed.c
> @@ -152,7 +152,6 @@ static void ac3_downmix_c_fixed16(int16_t **samples, int16_t **matrix,
> }
> }
>
> -#include "eac3dec.c"
> #include "ac3dec.c"
>
> static const AVOption options[] = {
> diff --git a/libavcodec/ac3dec_float.c b/libavcodec/ac3dec_float.c
> index 39d3cbd282..9756829643 100644
> --- a/libavcodec/ac3dec_float.c
> +++ b/libavcodec/ac3dec_float.c
> @@ -34,7 +34,6 @@
> #include "ac3dec.h"
> #include "codec_internal.h"
> #include "profiles.h"
> -#include "eac3dec.c"
> #include "ac3dec.c"
>
> static const AVOption options[] = {
> diff --git a/libavcodec/eac3dec.c b/libavcodec/eac3dec.c
> index 5c71751a0c..491f663d3e 100644
> --- a/libavcodec/eac3dec.c
> +++ b/libavcodec/eac3dec.c
> @@ -55,7 +55,7 @@ typedef enum {
>
> #define EAC3_SR_CODE_REDUCED 3
>
> -static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
> +void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
> {
> int bin, bnd, ch, i;
> uint8_t wrapflag[SPX_MAX_BANDS]={1,0,}, num_copy_sections, copy_sizes[SPX_MAX_BANDS];
> @@ -194,7 +194,7 @@ static void idct6(int pre_mant[6])
> pre_mant[5] = even0 - odd0;
> }
>
> -static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
> +void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
> {
> int bin, blk, gs;
> int end_bap, gaq_mode;
> @@ -287,7 +287,7 @@ static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
> }
> }
>
> -static int ff_eac3_parse_header(AC3DecodeContext *s)
> +int ff_eac3_parse_header(AC3DecodeContext *s)
> {
> int i, blk, ch;
> int ac3_exponent_strategy, parse_aht_info, parse_spx_atten_data;
Won't this uninline functions needlessly in the float case?
- Andreas
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [FFmpeg-devel] [PATCH] avcodec/eac3dec: remove function duplicates
2023-05-11 18:16 ` Andreas Rheinhardt
@ 2023-05-11 18:32 ` James Almer
0 siblings, 0 replies; 3+ messages in thread
From: James Almer @ 2023-05-11 18:32 UTC (permalink / raw)
To: ffmpeg-devel
On 5/11/2023 3:16 PM, Andreas Rheinhardt wrote:
> James Almer:
>> Thee are not part of the float/fixed ac3 template distinction.
>>
>> Signed-off-by: James Almer <jamrial@gmail.com>
>> ---
>> libavcodec/Makefile | 2 +-
>> libavcodec/ac3dec.h | 6 +++---
>> libavcodec/ac3dec_fixed.c | 1 -
>> libavcodec/ac3dec_float.c | 1 -
>> libavcodec/eac3dec.c | 6 +++---
>> 5 files changed, 7 insertions(+), 9 deletions(-)
>>
>> diff --git a/libavcodec/Makefile b/libavcodec/Makefile
>> index 3cf4444b7e..deaf233021 100644
>> --- a/libavcodec/Makefile
>> +++ b/libavcodec/Makefile
>> @@ -336,7 +336,7 @@ OBJS-$(CONFIG_DVVIDEO_ENCODER) += dvenc.o dv.o dvdata.o
>> OBJS-$(CONFIG_DXA_DECODER) += dxa.o
>> OBJS-$(CONFIG_DXTORY_DECODER) += dxtory.o
>> OBJS-$(CONFIG_DXV_DECODER) += dxv.o
>> -OBJS-$(CONFIG_EAC3_DECODER) += eac3_data.o
>> +OBJS-$(CONFIG_EAC3_DECODER) += eac3dec.o eac3_data.o
>> OBJS-$(CONFIG_EAC3_ENCODER) += eac3enc.o eac3_data.o
>> OBJS-$(CONFIG_EACMV_DECODER) += eacmv.o
>> OBJS-$(CONFIG_EAMAD_DECODER) += eamad.o eaidct.o mpeg12.o \
>> diff --git a/libavcodec/ac3dec.h b/libavcodec/ac3dec.h
>> index 98de7b5abf..99729adf0d 100644
>> --- a/libavcodec/ac3dec.h
>> +++ b/libavcodec/ac3dec.h
>> @@ -259,20 +259,20 @@ typedef struct AC3DecodeContext {
>> * Parse the E-AC-3 frame header.
>> * This parses both the bit stream info and audio frame header.
>> */
>> -static int ff_eac3_parse_header(AC3DecodeContext *s);
>> +int ff_eac3_parse_header(AC3DecodeContext *s);
>>
>> /**
>> * Decode mantissas in a single channel for the entire frame.
>> * This is used when AHT mode is enabled.
>> */
>> -static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
>> +void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
>>
>> /**
>> * Apply spectral extension to each channel by copying lower frequency
>> * coefficients to higher frequency bins and applying side information to
>> * approximate the original high frequency signal.
>> */
>> -static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
>> +void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
>>
>> #if (!USE_FIXED)
>> extern float ff_ac3_heavy_dynamic_range_tab[256];
>> diff --git a/libavcodec/ac3dec_fixed.c b/libavcodec/ac3dec_fixed.c
>> index c9e5cda69c..0909c363f2 100644
>> --- a/libavcodec/ac3dec_fixed.c
>> +++ b/libavcodec/ac3dec_fixed.c
>> @@ -152,7 +152,6 @@ static void ac3_downmix_c_fixed16(int16_t **samples, int16_t **matrix,
>> }
>> }
>>
>> -#include "eac3dec.c"
>> #include "ac3dec.c"
>>
>> static const AVOption options[] = {
>> diff --git a/libavcodec/ac3dec_float.c b/libavcodec/ac3dec_float.c
>> index 39d3cbd282..9756829643 100644
>> --- a/libavcodec/ac3dec_float.c
>> +++ b/libavcodec/ac3dec_float.c
>> @@ -34,7 +34,6 @@
>> #include "ac3dec.h"
>> #include "codec_internal.h"
>> #include "profiles.h"
>> -#include "eac3dec.c"
>> #include "ac3dec.c"
>>
>> static const AVOption options[] = {
>> diff --git a/libavcodec/eac3dec.c b/libavcodec/eac3dec.c
>> index 5c71751a0c..491f663d3e 100644
>> --- a/libavcodec/eac3dec.c
>> +++ b/libavcodec/eac3dec.c
>> @@ -55,7 +55,7 @@ typedef enum {
>>
>> #define EAC3_SR_CODE_REDUCED 3
>>
>> -static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
>> +void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
>> {
>> int bin, bnd, ch, i;
>> uint8_t wrapflag[SPX_MAX_BANDS]={1,0,}, num_copy_sections, copy_sizes[SPX_MAX_BANDS];
>> @@ -194,7 +194,7 @@ static void idct6(int pre_mant[6])
>> pre_mant[5] = even0 - odd0;
>> }
>>
>> -static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
>> +void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
>> {
>> int bin, blk, gs;
>> int end_bap, gaq_mode;
>> @@ -287,7 +287,7 @@ static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
>> }
>> }
>>
>> -static int ff_eac3_parse_header(AC3DecodeContext *s)
>> +int ff_eac3_parse_header(AC3DecodeContext *s)
>> {
>> int i, blk, ch;
>> int ac3_exponent_strategy, parse_aht_info, parse_spx_atten_data;
>
> Won't this uninline functions needlessly in the float case?
Yes. It's all also included and inlined in ac3dec_fixed.o, afaict, even
if there's only a float eac3 decoder (header parsing needs to happen
anyway).
Wouldn't uninlining it be preferable to binary bloating?
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-05-11 18:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-11 18:02 [FFmpeg-devel] [PATCH] avcodec/eac3dec: remove function duplicates James Almer
2023-05-11 18:16 ` Andreas Rheinhardt
2023-05-11 18:32 ` James Almer
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git