Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
 help / color / mirror / Atom feed
From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To: ffmpeg-devel@ffmpeg.org
Subject: Re: [FFmpeg-devel] [PATCH] avcodec/eac3dec: remove function duplicates
Date: Thu, 11 May 2023 20:16:53 +0200
Message-ID: <AS8P250MB0744F31D6BB648852F091F308F749@AS8P250MB0744.EURP250.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <20230511180215.14940-1-jamrial@gmail.com>

James Almer:
> Thee are not part of the float/fixed ac3 template distinction.
> 
> Signed-off-by: James Almer <jamrial@gmail.com>
> ---
>  libavcodec/Makefile       | 2 +-
>  libavcodec/ac3dec.h       | 6 +++---
>  libavcodec/ac3dec_fixed.c | 1 -
>  libavcodec/ac3dec_float.c | 1 -
>  libavcodec/eac3dec.c      | 6 +++---
>  5 files changed, 7 insertions(+), 9 deletions(-)
> 
> diff --git a/libavcodec/Makefile b/libavcodec/Makefile
> index 3cf4444b7e..deaf233021 100644
> --- a/libavcodec/Makefile
> +++ b/libavcodec/Makefile
> @@ -336,7 +336,7 @@ OBJS-$(CONFIG_DVVIDEO_ENCODER)         += dvenc.o dv.o dvdata.o
>  OBJS-$(CONFIG_DXA_DECODER)             += dxa.o
>  OBJS-$(CONFIG_DXTORY_DECODER)          += dxtory.o
>  OBJS-$(CONFIG_DXV_DECODER)             += dxv.o
> -OBJS-$(CONFIG_EAC3_DECODER)            += eac3_data.o
> +OBJS-$(CONFIG_EAC3_DECODER)            += eac3dec.o eac3_data.o
>  OBJS-$(CONFIG_EAC3_ENCODER)            += eac3enc.o eac3_data.o
>  OBJS-$(CONFIG_EACMV_DECODER)           += eacmv.o
>  OBJS-$(CONFIG_EAMAD_DECODER)           += eamad.o eaidct.o mpeg12.o \
> diff --git a/libavcodec/ac3dec.h b/libavcodec/ac3dec.h
> index 98de7b5abf..99729adf0d 100644
> --- a/libavcodec/ac3dec.h
> +++ b/libavcodec/ac3dec.h
> @@ -259,20 +259,20 @@ typedef struct AC3DecodeContext {
>   * Parse the E-AC-3 frame header.
>   * This parses both the bit stream info and audio frame header.
>   */
> -static int ff_eac3_parse_header(AC3DecodeContext *s);
> +int ff_eac3_parse_header(AC3DecodeContext *s);
>  
>  /**
>   * Decode mantissas in a single channel for the entire frame.
>   * This is used when AHT mode is enabled.
>   */
> -static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
> +void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
>  
>  /**
>   * Apply spectral extension to each channel by copying lower frequency
>   * coefficients to higher frequency bins and applying side information to
>   * approximate the original high frequency signal.
>   */
> -static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
> +void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
>  
>  #if (!USE_FIXED)
>  extern float ff_ac3_heavy_dynamic_range_tab[256];
> diff --git a/libavcodec/ac3dec_fixed.c b/libavcodec/ac3dec_fixed.c
> index c9e5cda69c..0909c363f2 100644
> --- a/libavcodec/ac3dec_fixed.c
> +++ b/libavcodec/ac3dec_fixed.c
> @@ -152,7 +152,6 @@ static void ac3_downmix_c_fixed16(int16_t **samples, int16_t **matrix,
>      }
>  }
>  
> -#include "eac3dec.c"
>  #include "ac3dec.c"
>  
>  static const AVOption options[] = {
> diff --git a/libavcodec/ac3dec_float.c b/libavcodec/ac3dec_float.c
> index 39d3cbd282..9756829643 100644
> --- a/libavcodec/ac3dec_float.c
> +++ b/libavcodec/ac3dec_float.c
> @@ -34,7 +34,6 @@
>  #include "ac3dec.h"
>  #include "codec_internal.h"
>  #include "profiles.h"
> -#include "eac3dec.c"
>  #include "ac3dec.c"
>  
>  static const AVOption options[] = {
> diff --git a/libavcodec/eac3dec.c b/libavcodec/eac3dec.c
> index 5c71751a0c..491f663d3e 100644
> --- a/libavcodec/eac3dec.c
> +++ b/libavcodec/eac3dec.c
> @@ -55,7 +55,7 @@ typedef enum {
>  
>  #define EAC3_SR_CODE_REDUCED  3
>  
> -static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
> +void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
>  {
>      int bin, bnd, ch, i;
>      uint8_t wrapflag[SPX_MAX_BANDS]={1,0,}, num_copy_sections, copy_sizes[SPX_MAX_BANDS];
> @@ -194,7 +194,7 @@ static void idct6(int pre_mant[6])
>      pre_mant[5] = even0 - odd0;
>  }
>  
> -static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
> +void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
>  {
>      int bin, blk, gs;
>      int end_bap, gaq_mode;
> @@ -287,7 +287,7 @@ static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
>      }
>  }
>  
> -static int ff_eac3_parse_header(AC3DecodeContext *s)
> +int ff_eac3_parse_header(AC3DecodeContext *s)
>  {
>      int i, blk, ch;
>      int ac3_exponent_strategy, parse_aht_info, parse_spx_atten_data;

Won't this uninline functions needlessly in the float case?

- Andreas

_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

  reply	other threads:[~2023-05-11 18:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-11 18:02 James Almer
2023-05-11 18:16 ` Andreas Rheinhardt [this message]
2023-05-11 18:32   ` James Almer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AS8P250MB0744F31D6BB648852F091F308F749@AS8P250MB0744.EURP250.PROD.OUTLOOK.COM \
    --to=andreas.rheinhardt@outlook.com \
    --cc=ffmpeg-devel@ffmpeg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
		ffmpegdev@gitmailbox.com
	public-inbox-index ffmpegdev

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git