* [FFmpeg-devel] [PATCH 1/2] avcodec/libjxlenc: Don't refer to decoder in comments
@ 2023-12-21 23:01 Andreas Rheinhardt
2023-12-21 23:03 ` [FFmpeg-devel] [PATCH 2/2] avcodec/libjxlenc: Set AV_CODEC_CAP_DR1 Andreas Rheinhardt
2023-12-23 3:00 ` [FFmpeg-devel] [PATCH 1/2] avcodec/libjxlenc: Don't refer to decoder in comments Leo Izen
0 siblings, 2 replies; 3+ messages in thread
From: Andreas Rheinhardt @ 2023-12-21 23:01 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Andreas Rheinhardt
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
---
libavcodec/libjxlenc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/libavcodec/libjxlenc.c b/libavcodec/libjxlenc.c
index d707f3a61b..055c9b7bb1 100644
--- a/libavcodec/libjxlenc.c
+++ b/libavcodec/libjxlenc.c
@@ -85,8 +85,8 @@ static float quality_to_distance(float quality)
}
/**
- * Initalize the decoder on a per-frame basis. All of these need to be set
- * once each time the decoder is reset, which it must be each frame to make
+ * Initalize the encoder on a per-frame basis. All of these need to be set
+ * once each time the encoder is reset, which it must be each frame to make
* the image2 muxer work.
*
* @return 0 upon success, negative on failure.
@@ -104,7 +104,7 @@ static int libjxl_init_jxl_encoder(AVCodecContext *avctx)
return AVERROR_EXTERNAL;
}
- /* This needs to be set each time the decoder is reset */
+ /* This needs to be set each time the encoder is reset */
if (JxlEncoderSetParallelRunner(ctx->encoder, JxlThreadParallelRunner, ctx->runner)
!= JXL_ENC_SUCCESS) {
av_log(avctx, AV_LOG_ERROR, "Failed to set JxlThreadParallelRunner\n");
@@ -446,7 +446,7 @@ static av_cold int libjxl_encode_close(AVCodecContext *avctx)
ctx->runner = NULL;
/*
- * destroying the decoder also frees
+ * destroying the encoder also frees
* ctx->options so we don't need to
*/
if (ctx->encoder)
--
2.34.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
* [FFmpeg-devel] [PATCH 2/2] avcodec/libjxlenc: Set AV_CODEC_CAP_DR1
2023-12-21 23:01 [FFmpeg-devel] [PATCH 1/2] avcodec/libjxlenc: Don't refer to decoder in comments Andreas Rheinhardt
@ 2023-12-21 23:03 ` Andreas Rheinhardt
2023-12-23 3:00 ` [FFmpeg-devel] [PATCH 1/2] avcodec/libjxlenc: Don't refer to decoder in comments Leo Izen
1 sibling, 0 replies; 3+ messages in thread
From: Andreas Rheinhardt @ 2023-12-21 23:03 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Andreas Rheinhardt
This encoder uses ff_get_encode_buffer() to allocate the packet buffer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
---
libavcodec/libjxlenc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/libavcodec/libjxlenc.c b/libavcodec/libjxlenc.c
index 055c9b7bb1..021e558687 100644
--- a/libavcodec/libjxlenc.c
+++ b/libavcodec/libjxlenc.c
@@ -486,6 +486,7 @@ const FFCodec ff_libjxl_encoder = {
FF_CODEC_ENCODE_CB(libjxl_encode_frame),
.close = libjxl_encode_close,
.p.capabilities = AV_CODEC_CAP_OTHER_THREADS |
+ AV_CODEC_CAP_DR1 |
AV_CODEC_CAP_ENCODER_REORDERED_OPAQUE,
.caps_internal = FF_CODEC_CAP_NOT_INIT_THREADSAFE |
FF_CODEC_CAP_AUTO_THREADS | FF_CODEC_CAP_INIT_CLEANUP |
--
2.34.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [FFmpeg-devel] [PATCH 1/2] avcodec/libjxlenc: Don't refer to decoder in comments
2023-12-21 23:01 [FFmpeg-devel] [PATCH 1/2] avcodec/libjxlenc: Don't refer to decoder in comments Andreas Rheinhardt
2023-12-21 23:03 ` [FFmpeg-devel] [PATCH 2/2] avcodec/libjxlenc: Set AV_CODEC_CAP_DR1 Andreas Rheinhardt
@ 2023-12-23 3:00 ` Leo Izen
1 sibling, 0 replies; 3+ messages in thread
From: Leo Izen @ 2023-12-23 3:00 UTC (permalink / raw)
To: ffmpeg-devel
On 12/21/23 18:01, Andreas Rheinhardt wrote:
> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
> ---
> libavcodec/libjxlenc.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/libavcodec/libjxlenc.c b/libavcodec/libjxlenc.c
> index d707f3a61b..055c9b7bb1 100644
> --- a/libavcodec/libjxlenc.c
> +++ b/libavcodec/libjxlenc.c
> @@ -85,8 +85,8 @@ static float quality_to_distance(float quality)
> }
>
Both of these LGTM.
- Leo Izen (Traneptora)
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-12-23 3:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-12-21 23:01 [FFmpeg-devel] [PATCH 1/2] avcodec/libjxlenc: Don't refer to decoder in comments Andreas Rheinhardt
2023-12-21 23:03 ` [FFmpeg-devel] [PATCH 2/2] avcodec/libjxlenc: Set AV_CODEC_CAP_DR1 Andreas Rheinhardt
2023-12-23 3:00 ` [FFmpeg-devel] [PATCH 1/2] avcodec/libjxlenc: Don't refer to decoder in comments Leo Izen
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git