From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com> To: ffmpeg-devel@ffmpeg.org Subject: Re: [FFmpeg-devel] [PATCH v6 12/13] avcodec/libx264: add support for writing out CLL and MDCV Date: Tue, 27 Feb 2024 23:26:13 +0100 Message-ID: <AS8P250MB07447D8F90B2504613382B648F592@AS8P250MB0744.EURP250.PROD.OUTLOOK.COM> (raw) In-Reply-To: <20240227221226.1377758-13-jeebjp@gmail.com> Jan Ekström: > Both of these two structures were first available with X264_BUILD > 163, so make relevant functionality conditional on the version > being at least such. > > Keep handle_side_data available in all cases as this way X264_init > does not require additional version based conditions within it. > > Finally, add a FATE test which verifies that pass-through of the > MDCV/CLL side data is working during encoding. > --- > configure | 2 + > libavcodec/libx264.c | 79 ++++++++++++++++++++++++++++++++++++ > tests/fate/enc_external.mak | 5 +++ > tests/ref/fate/libx264-hdr10 | 15 +++++++ > 4 files changed, 101 insertions(+) > create mode 100644 tests/ref/fate/libx264-hdr10 > > diff --git a/configure b/configure > index bb5e630bad..f48cf46ffe 100755 > --- a/configure > +++ b/configure > @@ -2527,6 +2527,7 @@ CONFIG_EXTRA=" > jpegtables > lgplv3 > libx262 > + libx264_hdr10 > llauddsp > llviddsp > llvidencdsp > @@ -6927,6 +6928,7 @@ enabled libx264 && require_pkg_config libx264 x264 "stdint.h x264.h" x > require_cpp_condition libx264 x264.h "X264_BUILD >= 122" && { > [ "$toolchain" != "msvc" ] || > require_cpp_condition libx264 x264.h "X264_BUILD >= 158"; } && > + check_cpp_condition libx264_hdr10 x264.h "X264_BUILD >= 163" && Why don't you just check X264_BUILD in libx264.c instead of adding this to configure? > check_cpp_condition libx262 x264.h "X264_MPEG2" > enabled libx265 && require_pkg_config libx265 x265 x265.h x265_api_get && > require_cpp_condition libx265 x265.h "X265_BUILD >= 89" > diff --git a/libavcodec/libx264.c b/libavcodec/libx264.c > index 10d646bd76..effdcfdb37 100644 > --- a/libavcodec/libx264.c > +++ b/libavcodec/libx264.c > @@ -25,6 +25,7 @@ > #include "libavutil/eval.h" > #include "libavutil/internal.h" > #include "libavutil/opt.h" > +#include "libavutil/mastering_display_metadata.h" > #include "libavutil/mem.h" > #include "libavutil/pixdesc.h" > #include "libavutil/stereo3d.h" > @@ -871,6 +872,82 @@ static int convert_pix_fmt(enum AVPixelFormat pix_fmt) > return AVERROR(EINVAL);\ > } > > +#if CONFIG_LIBX264_HDR10 > +static void handle_mdcv(x264_param_t *params, > + const AVMasteringDisplayMetadata *mdcv) > +{ > + if (!mdcv->has_primaries && !mdcv->has_luminance) > + return; > + > + params->mastering_display.b_mastering_display = 1; > + > + if (mdcv->has_primaries) { > + int *const points[][2] = { > + { > + ¶ms->mastering_display.i_red_x, > + ¶ms->mastering_display.i_red_y > + }, > + { > + ¶ms->mastering_display.i_green_x, > + ¶ms->mastering_display.i_green_y > + }, > + { > + ¶ms->mastering_display.i_blue_x, > + ¶ms->mastering_display.i_blue_y > + }, > + }; > + > + for (int i = 0; i < 3; i++) { > + const AVRational *src = mdcv->display_primaries[i]; > + int *dst[2] = { points[i][0], points[i][1] }; > + > + *dst[0] = av_rescale_q(1, src[0], (AVRational){ 1, 50000 }); > + *dst[1] = av_rescale_q(1, src[1], (AVRational){ 1, 50000 }); > + } > + > + params->mastering_display.i_white_x = > + av_rescale_q(1, mdcv->white_point[0], (AVRational){ 1, 50000 }); > + params->mastering_display.i_white_y = > + av_rescale_q(1, mdcv->white_point[1], (AVRational){ 1, 50000 }); > + } > + > + if (mdcv->has_luminance) { > + params->mastering_display.i_display_max = > + av_rescale_q(1, mdcv->max_luminance, (AVRational){ 1, 10000 }); > + params->mastering_display.i_display_min = > + av_rescale_q(1, mdcv->min_luminance, (AVRational){ 1, 10000 }); > + } > +} > +#endif // CONFIG_LIBX264_HDR10 > + > +static void handle_side_data(AVCodecContext *avctx, x264_param_t *params) > +{ > +#if CONFIG_LIBX264_HDR10 > + const AVFrameSideData *cll_sd = > + av_frame_side_data_get( > + (const AVFrameSideData **)avctx->frame_side_data, > + avctx->nb_frame_side_data, AV_FRAME_DATA_CONTENT_LIGHT_LEVEL); > + const AVFrameSideData *mdcv_sd = > + av_frame_side_data_get( > + (const AVFrameSideData **)avctx->frame_side_data, > + avctx->nb_frame_side_data, AV_FRAME_DATA_MASTERING_DISPLAY_METADATA); > + > + if (cll_sd) { > + const AVContentLightMetadata *cll = > + (AVContentLightMetadata *)cll_sd->data; > + > + params->content_light_level.i_max_cll = cll->MaxCLL; > + params->content_light_level.i_max_fall = cll->MaxFALL; > + > + params->content_light_level.b_cll = 1; > + } > + > + if (mdcv_sd) { > + handle_mdcv(params, (AVMasteringDisplayMetadata *)mdcv_sd->data); > + } > +#endif // CONFIG_LIBX264_HDR10 > +} > + > static av_cold int X264_init(AVCodecContext *avctx) > { > X264Context *x4 = avctx->priv_data; > @@ -1171,6 +1248,8 @@ FF_ENABLE_DEPRECATION_WARNINGS > if (avctx->chroma_sample_location != AVCHROMA_LOC_UNSPECIFIED) > x4->params.vui.i_chroma_loc = avctx->chroma_sample_location - 1; > > + handle_side_data(avctx, &x4->params); > + > if (avctx->flags & AV_CODEC_FLAG_GLOBAL_HEADER) > x4->params.b_repeat_headers = 0; > > diff --git a/tests/fate/enc_external.mak b/tests/fate/enc_external.mak > index d787941c16..4095a4b51a 100644 > --- a/tests/fate/enc_external.mak > +++ b/tests/fate/enc_external.mak > @@ -7,5 +7,10 @@ FATE_ENC_EXTERNAL-$(call ENCDEC, LIBSVTAV1 HEVC, MOV, HEVC_DEMUXER LIBDAV1D_DECO > fate-libsvtav1-hdr10: CMD = enc_external $(TARGET_SAMPLES)/hevc/hdr10_plus_h265_sample.hevc \ > mp4 "-c:v libsvtav1" "-show_frames -show_entries frame=side_data_list -of flat" > > +# test for x264 MDCV and CLL passthrough during encoding > +FATE_ENC_EXTERNAL-$(call ENCDEC, LIBX264 HEVC, MOV, LIBX264_HDR10 HEVC_DEMUXER H264_DECODER) += fate-libx264-hdr10 > +fate-libx264-hdr10: CMD = enc_external $(TARGET_SAMPLES)/hevc/hdr10_plus_h265_sample.hevc \ > + mp4 "-c:v libx264" "-show_frames -show_entries frame=side_data_list -of flat" > + > FATE_SAMPLES_FFMPEG_FFPROBE += $(FATE_ENC_EXTERNAL-yes) > fate-enc-external: $(FATE_ENC_EXTERNAL-yes) > diff --git a/tests/ref/fate/libx264-hdr10 b/tests/ref/fate/libx264-hdr10 > new file mode 100644 > index 0000000000..99c11677f0 > --- /dev/null > +++ b/tests/ref/fate/libx264-hdr10 > @@ -0,0 +1,15 @@ > +frames.frame.0.side_data_list.side_data.0.side_data_type="H.26[45] User Data Unregistered SEI message" > +frames.frame.0.side_data_list.side_data.1.side_data_type="Mastering display metadata" > +frames.frame.0.side_data_list.side_data.1.red_x="13250/50000" > +frames.frame.0.side_data_list.side_data.1.red_y="34500/50000" > +frames.frame.0.side_data_list.side_data.1.green_x="7500/50000" > +frames.frame.0.side_data_list.side_data.1.green_y="3000/50000" > +frames.frame.0.side_data_list.side_data.1.blue_x="34000/50000" > +frames.frame.0.side_data_list.side_data.1.blue_y="16000/50000" > +frames.frame.0.side_data_list.side_data.1.white_point_x="15635/50000" > +frames.frame.0.side_data_list.side_data.1.white_point_y="16450/50000" > +frames.frame.0.side_data_list.side_data.1.min_luminance="50/10000" > +frames.frame.0.side_data_list.side_data.1.max_luminance="10000000/10000" > +frames.frame.0.side_data_list.side_data.2.side_data_type="Content light level metadata" > +frames.frame.0.side_data_list.side_data.2.max_content=1000 > +frames.frame.0.side_data_list.side_data.2.max_average=200 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2024-02-27 22:24 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-02-27 22:12 [FFmpeg-devel] [PATCH v6 00/13] encoder AVCodecContext configuration side data Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 01/13] avutil/frame: split side data list wiping out to non-AVFrame function Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 02/13] avutil/frame: add helper for freeing arrays of side data Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 03/13] avutil/frame: split side_data_from_buf to base and AVFrame func Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 04/13] avutil/frame: split side data removal out to non-AVFrame function Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 05/13] avutil/frame: add helper for adding side data to array Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 06/13] avutil/frame: add helper for adding existing side data to set Jan Ekström 2024-02-27 23:20 ` James Almer 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 07/13] avutil/frame: add helper for getting side data from array Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 08/13] avcodec: add frame side data array to AVCodecContext Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 09/13] avcodec: add helper for configuring AVCodecContext's frame side data Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 10/13] ffmpeg: pass first video AVFrame's side data to encoder Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 11/13] avcodec/libsvtav1: add support for writing out CLL and MDCV Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 12/13] avcodec/libx264: " Jan Ekström 2024-02-27 22:26 ` Andreas Rheinhardt [this message] 2024-02-27 23:39 ` Jan Ekström 2024-02-28 18:07 ` Jan Ekström 2024-02-27 22:12 ` [FFmpeg-devel] [PATCH v6 13/13] avcodec/libx265: " Jan Ekström
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=AS8P250MB07447D8F90B2504613382B648F592@AS8P250MB0744.EURP250.PROD.OUTLOOK.COM \ --to=andreas.rheinhardt@outlook.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git