From: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To: ffmpeg-devel@ffmpeg.org
Cc: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Subject: [FFmpeg-devel] [PATCH 11/21] avcodec/lcldec: Use ff_inflate_init/end(), cleanup generically
Date: Tue, 15 Mar 2022 21:06:01 +0100
Message-ID: <AS1PR01MB9564CAA5AE3B33FB6305DA738F109@AS1PR01MB9564.eurprd01.prod.exchangelabs.com> (raw)
In-Reply-To: <AS1PR01MB956473F7529A463D0DFC230B8F109@AS1PR01MB9564.eurprd01.prod.exchangelabs.com>
Returns better error messages in case of error and deduplicates
the inflateInit() code and also allows to cleanup generically
in case of errors as it is save to call ff_inflate_end() if
ff_inflate_init() has not been called successfully.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
---
configure | 2 +-
libavcodec/lcldec.c | 43 +++++++++++++++++--------------------------
2 files changed, 18 insertions(+), 27 deletions(-)
diff --git a/configure b/configure
index c79908c1bd..c56b7ba85b 100755
--- a/configure
+++ b/configure
@@ -2990,7 +2990,7 @@ xma1_decoder_select="wmapro_decoder"
xma2_decoder_select="wmapro_decoder"
ylc_decoder_select="bswapdsp"
zerocodec_decoder_select="inflate_wrapper"
-zlib_decoder_deps="zlib"
+zlib_decoder_select="inflate_wrapper"
zlib_encoder_deps="zlib"
zmbv_decoder_select="inflate_wrapper"
zmbv_encoder_deps="zlib"
diff --git a/libavcodec/lcldec.c b/libavcodec/lcldec.c
index f3b7a8ac1b..8a66065800 100644
--- a/libavcodec/lcldec.c
+++ b/libavcodec/lcldec.c
@@ -49,6 +49,7 @@
#include "thread.h"
#if CONFIG_ZLIB_DECODER
+#include "zlib_wrapper.h"
#include <zlib.h>
#endif
@@ -64,7 +65,7 @@ typedef struct LclDecContext {
// Decompression buffer
unsigned char* decomp_buf;
#if CONFIG_ZLIB_DECODER
- z_stream zstream;
+ FFZStream zstream;
#endif
} LclDecContext;
@@ -131,26 +132,27 @@ static unsigned int mszh_decomp(const unsigned char * srcptr, int srclen, unsign
static int zlib_decomp(AVCodecContext *avctx, const uint8_t *src, int src_len, int offset, int expected)
{
LclDecContext *c = avctx->priv_data;
- int zret = inflateReset(&c->zstream);
+ z_stream *const zstream = &c->zstream.zstream;
+ int zret = inflateReset(zstream);
if (zret != Z_OK) {
av_log(avctx, AV_LOG_ERROR, "Inflate reset error: %d\n", zret);
return AVERROR_UNKNOWN;
}
- c->zstream.next_in = src;
- c->zstream.avail_in = src_len;
- c->zstream.next_out = c->decomp_buf + offset;
- c->zstream.avail_out = c->decomp_size - offset;
- zret = inflate(&c->zstream, Z_FINISH);
+ zstream->next_in = src;
+ zstream->avail_in = src_len;
+ zstream->next_out = c->decomp_buf + offset;
+ zstream->avail_out = c->decomp_size - offset;
+ zret = inflate(zstream, Z_FINISH);
if (zret != Z_OK && zret != Z_STREAM_END) {
av_log(avctx, AV_LOG_ERROR, "Inflate error: %d\n", zret);
return AVERROR_UNKNOWN;
}
- if (expected != (unsigned int)c->zstream.total_out) {
+ if (expected != (unsigned int)zstream->total_out) {
av_log(avctx, AV_LOG_ERROR, "Decoded size differs (%d != %lu)\n",
- expected, c->zstream.total_out);
+ expected, zstream->total_out);
return AVERROR_UNKNOWN;
}
- return c->zstream.total_out;
+ return zstream->total_out;
}
#endif
@@ -606,18 +608,8 @@ static av_cold int decode_init(AVCodecContext *avctx)
/* If needed init zlib */
#if CONFIG_ZLIB_DECODER
- if (avctx->codec_id == AV_CODEC_ID_ZLIB) {
- int zret;
- c->zstream.zalloc = Z_NULL;
- c->zstream.zfree = Z_NULL;
- c->zstream.opaque = Z_NULL;
- zret = inflateInit(&c->zstream);
- if (zret != Z_OK) {
- av_log(avctx, AV_LOG_ERROR, "Inflate init error: %d\n", zret);
- av_freep(&c->decomp_buf);
- return AVERROR_UNKNOWN;
- }
- }
+ if (avctx->codec_id == AV_CODEC_ID_ZLIB)
+ return ff_inflate_init(&c->zstream, avctx);
#endif
return 0;
@@ -629,8 +621,7 @@ static av_cold int decode_end(AVCodecContext *avctx)
av_freep(&c->decomp_buf);
#if CONFIG_ZLIB_DECODER
- if (avctx->codec_id == AV_CODEC_ID_ZLIB)
- inflateEnd(&c->zstream);
+ ff_inflate_end(&c->zstream);
#endif
return 0;
@@ -647,7 +638,7 @@ const AVCodec ff_mszh_decoder = {
.close = decode_end,
.decode = decode_frame,
.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_FRAME_THREADS,
- .caps_internal = FF_CODEC_CAP_INIT_THREADSAFE,
+ .caps_internal = FF_CODEC_CAP_INIT_THREADSAFE | FF_CODEC_CAP_INIT_CLEANUP,
};
#endif
@@ -662,6 +653,6 @@ const AVCodec ff_zlib_decoder = {
.close = decode_end,
.decode = decode_frame,
.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_FRAME_THREADS,
- .caps_internal = FF_CODEC_CAP_INIT_THREADSAFE,
+ .caps_internal = FF_CODEC_CAP_INIT_THREADSAFE | FF_CODEC_CAP_INIT_CLEANUP,
};
#endif
--
2.32.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-03-15 20:07 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-15 20:03 [FFmpeg-devel] [PATCH 01/21] avcodec/pngenc: Avoid potentially truncating integers Andreas Rheinhardt
2022-03-15 20:05 ` [FFmpeg-devel] [PATCH 02/21] avcodec/zlib_wrapper: Add wrappers for zlib inflateInit, inflateEnd Andreas Rheinhardt
2022-03-16 19:24 ` Tomas Härdin
2022-03-16 19:32 ` Andreas Rheinhardt
2022-03-16 20:07 ` Tomas Härdin
2022-03-17 7:29 ` Andreas Rheinhardt
2022-03-15 20:05 ` [FFmpeg-devel] [PATCH 03/21] avcodec/zmbv: Use ff_inflate_init/end() Andreas Rheinhardt
2022-03-16 19:31 ` Tomas Härdin
2022-03-15 20:05 ` [FFmpeg-devel] [PATCH 04/21] avcodec/zerocodec: " Andreas Rheinhardt
2022-03-15 20:05 ` [FFmpeg-devel] [PATCH 05/21] avcodec/wcmv: " Andreas Rheinhardt
2022-03-15 20:05 ` [FFmpeg-devel] [PATCH 06/21] avcodec/tscc: " Andreas Rheinhardt
2022-03-15 20:05 ` [FFmpeg-devel] [PATCH 07/21] avcodec/rasc: " Andreas Rheinhardt
2022-03-15 20:05 ` [FFmpeg-devel] [PATCH 08/21] avcodec/mwsc: " Andreas Rheinhardt
2022-03-15 20:05 ` [FFmpeg-devel] [PATCH 09/21] avcodec/mvha: " Andreas Rheinhardt
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 10/21] avcodec/mscc: " Andreas Rheinhardt
2022-03-15 20:06 ` Andreas Rheinhardt [this message]
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 12/21] avcodec/flashsv: " Andreas Rheinhardt
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 13/21] avcodec/zlib_wrapper: Use our allocation, freeing functions Andreas Rheinhardt
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 14/21] avcodec/lscrdec: Don't open and close z_streams unnecessarily Andreas Rheinhardt
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 15/21] avcodec/pngdec: " Andreas Rheinhardt
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 16/21] avcodec/pngenc: Don't use deflateInit2() with default parameters Andreas Rheinhardt
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 17/21] avcodec/zlib_wrapper: Add wrapper for deflateInit() Andreas Rheinhardt
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 18/21] avcodec/zmbvenc: Use ff_deflate_init/end() wrappers Andreas Rheinhardt
2022-03-16 20:03 ` Tomas Härdin
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 19/21] avcodec/pngenc: " Andreas Rheinhardt
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 20/21] avcodec/lclenc: " Andreas Rheinhardt
2022-03-15 20:06 ` [FFmpeg-devel] [PATCH 21/21] avcodec/flashsv2enc: Avoid opening and closing z_stream Andreas Rheinhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AS1PR01MB9564CAA5AE3B33FB6305DA738F109@AS1PR01MB9564.eurprd01.prod.exchangelabs.com \
--to=andreas.rheinhardt@outlook.com \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git