* [FFmpeg-devel] [PATCH] avcodec/mjpegdec: add support for decoding jpeg rgb file with subsampling
@ 2023-03-26 2:13 Wang Chuan
2023-03-26 11:28 ` Leo Izen
0 siblings, 1 reply; 3+ messages in thread
From: Wang Chuan @ 2023-03-26 2:13 UTC (permalink / raw)
To: ffmpeg-devel
Fixes ticket #10190
Signed-off-by: Wang Chuan <ouchuanm@outlook.com>
---
libavcodec/mjpegdec.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/libavcodec/mjpegdec.c b/libavcodec/mjpegdec.c
index c833d66c4d..aa58f336d4 100644
--- a/libavcodec/mjpegdec.c
+++ b/libavcodec/mjpegdec.c
@@ -574,6 +574,27 @@ int ff_mjpeg_decode_sof(MJpegDecodeContext *s)
if (s->bits <= 8) s->avctx->pix_fmt = s->cs_itu601 ?
AV_PIX_FMT_YUV444P : AV_PIX_FMT_YUVJ444P;
else
goto unk_pixfmt;
+ if (s->component_id[0] == 'R' && s->component_id[1] == 'G'
&& s->component_id[2] == 'B') {
+ if (s->bits <= 8)
+ s->avctx->pix_fmt = AV_PIX_FMT_GBRP;
+ else
+ goto unk_pixfmt;
+ if (pix_fmt_id == 0x22221100) {
+ s->upscale_h[0] = s->upscale_v[0] = 0;
+ s->upscale_h[1] = s->upscale_v[1] = 1;
+ s->upscale_h[2] = s->upscale_v[2] = 0;
+ } else if (pix_fmt_id == 0x22112200) {
+ s->upscale_h[0] = s->upscale_v[0] = 1;
+ s->upscale_h[1] = s->upscale_v[1] = 0;
+ s->upscale_h[2] = s->upscale_v[2] = 0;
+ } else if (pix_fmt_id == 0x11222200) {
+ s->upscale_h[0] = s->upscale_v[0] = 0;
+ s->upscale_h[1] = s->upscale_v[1] = 0;
+ s->upscale_h[2] = s->upscale_v[2] = 1;
+ } else {
+ goto unk_pixfmt;
+ }
+ }
s->avctx->color_range = s->cs_itu601 ? AVCOL_RANGE_MPEG :
AVCOL_RANGE_JPEG;
break;
case 0x11000000:
--
2.37.1 (Apple Git-137.1)
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [FFmpeg-devel] [PATCH] avcodec/mjpegdec: add support for decoding jpeg rgb file with subsampling
2023-03-26 2:13 [FFmpeg-devel] [PATCH] avcodec/mjpegdec: add support for decoding jpeg rgb file with subsampling Wang Chuan
@ 2023-03-26 11:28 ` Leo Izen
2023-03-27 6:06 ` Wang Chuan
0 siblings, 1 reply; 3+ messages in thread
From: Leo Izen @ 2023-03-26 11:28 UTC (permalink / raw)
To: ffmpeg-devel
On 3/25/23 22:13, Wang Chuan wrote:
> Fixes ticket #10190
>
> Signed-off-by: Wang Chuan <ouchuanm@outlook.com>
> ---
> libavcodec/mjpegdec.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/libavcodec/mjpegdec.c b/libavcodec/mjpegdec.c
> index c833d66c4d..aa58f336d4 100644
> --- a/libavcodec/mjpegdec.c
> +++ b/libavcodec/mjpegdec.c
> @@ -574,6 +574,27 @@ int ff_mjpeg_decode_sof(MJpegDecodeContext *s)
> if (s->bits <= 8) s->avctx->pix_fmt = s->cs_itu601 ?
> AV_PIX_FMT_YUV444P : AV_PIX_FMT_YUVJ444P;
> else
> goto unk_pixfmt;
> + if (s->component_id[0] == 'R' && s->component_id[1] == 'G'
> && s->component_id[2] == 'B') {
> + if (s->bits <= 8)
> + s->avctx->pix_fmt = AV_PIX_FMT_GBRP;
> + else
> + goto unk_pixfmt;
> + if (pix_fmt_id == 0x22221100) {
> + s->upscale_h[0] = s->upscale_v[0] = 0;
> + s->upscale_h[1] = s->upscale_v[1] = 1;
> + s->upscale_h[2] = s->upscale_v[2] = 0;
> + } else if (pix_fmt_id == 0x22112200) {
> + s->upscale_h[0] = s->upscale_v[0] = 1;
> + s->upscale_h[1] = s->upscale_v[1] = 0;
> + s->upscale_h[2] = s->upscale_v[2] = 0;
> + } else if (pix_fmt_id == 0x11222200) {
> + s->upscale_h[0] = s->upscale_v[0] = 0;
> + s->upscale_h[1] = s->upscale_v[1] = 0;
> + s->upscale_h[2] = s->upscale_v[2] = 1;
> + } else {
> + goto unk_pixfmt;
> + }
> + }
> s->avctx->color_range = s->cs_itu601 ? AVCOL_RANGE_MPEG :
> AVCOL_RANGE_JPEG;
> break;
> case 0x11000000:
This doesn't work with progressive JPEGs, which still produce the
"patches welcome" message.
FWIW I already have a patch on the ML to fix this exact issue.
- Leo Izen (thebombzen)
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [FFmpeg-devel] [PATCH] avcodec/mjpegdec: add support for decoding jpeg rgb file with subsampling
2023-03-26 11:28 ` Leo Izen
@ 2023-03-27 6:06 ` Wang Chuan
0 siblings, 0 replies; 3+ messages in thread
From: Wang Chuan @ 2023-03-27 6:06 UTC (permalink / raw)
To: ffmpeg-devel
Ok, thx for your reminder:)
I hadn't noticed your patch that time
On 3/26/2023 7:28 PM, Leo Izen wrote:
> On 3/25/23 22:13, Wang Chuan wrote:
>> Fixes ticket #10190
>>
>> Signed-off-by: Wang Chuan <ouchuanm@outlook.com>
>> ---
>> libavcodec/mjpegdec.c | 21 +++++++++++++++++++++
>> 1 file changed, 21 insertions(+)
>>
>> diff --git a/libavcodec/mjpegdec.c b/libavcodec/mjpegdec.c
>> index c833d66c4d..aa58f336d4 100644
>> --- a/libavcodec/mjpegdec.c
>> +++ b/libavcodec/mjpegdec.c
>> @@ -574,6 +574,27 @@ int ff_mjpeg_decode_sof(MJpegDecodeContext *s)
>> if (s->bits <= 8) s->avctx->pix_fmt = s->cs_itu601 ?
>> AV_PIX_FMT_YUV444P : AV_PIX_FMT_YUVJ444P;
>> else
>> goto unk_pixfmt;
>> + if (s->component_id[0] == 'R' && s->component_id[1] ==
>> 'G' && s->component_id[2] == 'B') {
>> + if (s->bits <= 8)
>> + s->avctx->pix_fmt = AV_PIX_FMT_GBRP;
>> + else
>> + goto unk_pixfmt;
>> + if (pix_fmt_id == 0x22221100) {
>> + s->upscale_h[0] = s->upscale_v[0] = 0;
>> + s->upscale_h[1] = s->upscale_v[1] = 1;
>> + s->upscale_h[2] = s->upscale_v[2] = 0;
>> + } else if (pix_fmt_id == 0x22112200) {
>> + s->upscale_h[0] = s->upscale_v[0] = 1;
>> + s->upscale_h[1] = s->upscale_v[1] = 0;
>> + s->upscale_h[2] = s->upscale_v[2] = 0;
>> + } else if (pix_fmt_id == 0x11222200) {
>> + s->upscale_h[0] = s->upscale_v[0] = 0;
>> + s->upscale_h[1] = s->upscale_v[1] = 0;
>> + s->upscale_h[2] = s->upscale_v[2] = 1;
>> + } else {
>> + goto unk_pixfmt;
>> + }
>> + }
>> s->avctx->color_range = s->cs_itu601 ? AVCOL_RANGE_MPEG
>> : AVCOL_RANGE_JPEG;
>> break;
>> case 0x11000000:
>
> This doesn't work with progressive JPEGs, which still produce the
> "patches welcome" message.
>
> FWIW I already have a patch on the ML to fix this exact issue.
>
> - Leo Izen (thebombzen)
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-03-27 6:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-26 2:13 [FFmpeg-devel] [PATCH] avcodec/mjpegdec: add support for decoding jpeg rgb file with subsampling Wang Chuan
2023-03-26 11:28 ` Leo Izen
2023-03-27 6:06 ` Wang Chuan
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git