From: James Almer <jamrial@gmail.com> To: ffmpeg-devel@ffmpeg.org Subject: Re: [FFmpeg-devel] [PATCH 5/6] fftools/ffmpeg: support applying container level cropping Date: Wed, 29 May 2024 22:04:49 -0300 Message-ID: <8d670e76-1b41-4139-b8dc-d00a1aae75bc@gmail.com> (raw) In-Reply-To: <ec23c5fd-502b-4bca-8ae7-76df1ea100d4@lynne.ee> On 5/29/2024 10:01 PM, Lynne via ffmpeg-devel wrote: > On 29/05/2024 23:46, James Almer wrote: >> Signed-off-by: James Almer <jamrial@gmail.com> >> --- >> fftools/ffmpeg.h | 7 +++++++ >> fftools/ffmpeg_demux.c | 16 ++++++++++++++++ >> fftools/ffmpeg_filter.c | 11 +++++++++++ >> fftools/ffmpeg_opt.c | 3 +++ >> 4 files changed, 37 insertions(+) >> >> diff --git a/fftools/ffmpeg.h b/fftools/ffmpeg.h >> index fe75706afd..f908e16549 100644 >> --- a/fftools/ffmpeg.h >> +++ b/fftools/ffmpeg.h >> @@ -155,6 +155,7 @@ typedef struct OptionsContext { >> SpecifierOptList hwaccel_devices; >> SpecifierOptList hwaccel_output_formats; >> SpecifierOptList autorotate; >> + SpecifierOptList apply_cropping; >> /* output options */ >> StreamMap *stream_maps; >> @@ -239,6 +240,7 @@ enum IFilterFlags { >> IFILTER_FLAG_AUTOROTATE = (1 << 0), >> IFILTER_FLAG_REINIT = (1 << 1), >> IFILTER_FLAG_CFR = (1 << 2), >> + IFILTER_FLAG_CROP = (1 << 3), >> }; >> typedef struct InputFilterOptions { >> @@ -254,6 +256,11 @@ typedef struct InputFilterOptions { >> * accurate */ >> AVRational framerate; >> + unsigned crop_top; >> + unsigned crop_bottom; >> + unsigned crop_left; >> + unsigned crop_right; >> + >> int sub2video_width; >> int sub2video_height; >> diff --git a/fftools/ffmpeg_demux.c b/fftools/ffmpeg_demux.c >> index 1ca8d804ae..4178b8f840 100644 >> --- a/fftools/ffmpeg_demux.c >> +++ b/fftools/ffmpeg_demux.c >> @@ -66,6 +66,7 @@ typedef struct DemuxStream { >> int have_sub2video; >> int reinit_filters; >> int autorotate; >> + int apply_cropping; >> int wrap_correction_done; >> @@ -1000,11 +1001,20 @@ int ist_filter_add(InputStream *ist, >> InputFilter *ifilter, int is_simple, >> ist->filters[ist->nb_filters - 1] = ifilter; >> if (ist->par->codec_type == AVMEDIA_TYPE_VIDEO) { >> + const AVPacketSideData *sd = >> av_packet_side_data_get(ist->st->codecpar->coded_side_data, >> + >> ist->st->codecpar->nb_coded_side_data, >> + >> AV_PKT_DATA_FRAME_CROPPING); >> if (ist->framerate.num > 0 && ist->framerate.den > 0) { >> opts->framerate = ist->framerate; >> opts->flags |= IFILTER_FLAG_CFR; >> } else >> opts->framerate = av_guess_frame_rate(d->f.ctx, ist->st, >> NULL); >> + if (sd && sd->size == sizeof(uint32_t) * 4) { >> + opts->crop_top = AV_RL32(sd->data + 0); >> + opts->crop_bottom = AV_RL32(sd->data + 4); >> + opts->crop_left = AV_RL32(sd->data + 8); >> + opts->crop_right = AV_RL32(sd->data + 12); >> + } >> } else if (ist->par->codec_type == AVMEDIA_TYPE_SUBTITLE) { >> /* Compute the size of the canvas for the subtitles stream. >> If the subtitles codecpar has set a size, use it. >> Otherwise use the >> @@ -1059,6 +1069,7 @@ int ist_filter_add(InputStream *ist, InputFilter >> *ifilter, int is_simple, >> return AVERROR(ENOMEM); >> opts->flags |= IFILTER_FLAG_AUTOROTATE * !!(ds->autorotate) | >> + IFILTER_FLAG_CROP * !!(ds->apply_cropping) | >> IFILTER_FLAG_REINIT * !!(ds->reinit_filters); >> return ds->sch_idx_dec; >> @@ -1241,6 +1252,9 @@ static int ist_add(const OptionsContext *o, >> Demuxer *d, AVStream *st) >> ds->autorotate = 1; >> MATCH_PER_STREAM_OPT(autorotate, i, ds->autorotate, ic, st); >> + ds->apply_cropping = 1; >> + MATCH_PER_STREAM_OPT(apply_cropping, i, ds->apply_cropping, ic, st); >> + >> MATCH_PER_STREAM_OPT(codec_tags, str, codec_tag, ic, st); >> if (codec_tag) { >> uint32_t tag = strtol(codec_tag, &next, 0); >> @@ -1362,6 +1376,8 @@ static int ist_add(const OptionsContext *o, >> Demuxer *d, AVStream *st) >> ds->dec_opts.flags |= DECODER_FLAG_BITEXACT * !!o->bitexact; >> + av_dict_set_int(&ds->decoder_opts, "apply_cropping", >> ds->apply_cropping, 0); >> + >> /* Attached pics are sparse, therefore we would not want to >> delay their decoding >> * till EOF. */ >> if (ist->st->disposition & AV_DISPOSITION_ATTACHED_PIC) >> diff --git a/fftools/ffmpeg_filter.c b/fftools/ffmpeg_filter.c >> index 12cca684b4..a31fa1be7f 100644 >> --- a/fftools/ffmpeg_filter.c >> +++ b/fftools/ffmpeg_filter.c >> @@ -1701,6 +1701,17 @@ static int >> configure_input_video_filter(FilterGraph *fg, AVFilterGraph *graph, >> desc = av_pix_fmt_desc_get(ifp->format); >> av_assert0(desc); >> + if ((ifp->opts.flags & IFILTER_FLAG_CROP) && >> + !(desc->flags & AV_PIX_FMT_FLAG_HWACCEL)) { >> + char crop_buf[64]; >> + snprintf(crop_buf, sizeof(crop_buf), "w=iw-%d-%d:h=ih-%d-%d", >> + ifp->opts.crop_left, ifp->opts.crop_right, >> + ifp->opts.crop_top, ifp->opts.crop_bottom); >> + ret = insert_filter(&last_filter, &pad_idx, "crop", crop_buf); >> + if (ret < 0) >> + return ret; >> + } > > The crop filter supports hardware frames too. It exports the values within the AVFrame fields. If that's acceptable then i can remove this check. > >> + >> // TODO: insert hwaccel enabled filters like transpose_vaapi >> into the graph >> ifp->displaymatrix_applied = 0; >> if ((ifp->opts.flags & IFILTER_FLAG_AUTOROTATE) && >> diff --git a/fftools/ffmpeg_opt.c b/fftools/ffmpeg_opt.c >> index 910e4a336b..0c50ce16ba 100644 >> --- a/fftools/ffmpeg_opt.c >> +++ b/fftools/ffmpeg_opt.c >> @@ -1732,6 +1732,9 @@ const OptionDef options[] = { >> { "autoscale", OPT_TYPE_BOOL, OPT_PERSTREAM | >> OPT_EXPERT | OPT_OUTPUT, >> { .off = OFFSET(autoscale) }, >> "automatically insert a scale filter at the end of the >> filter graph" }, >> + { "apply_cropping", OPT_TYPE_BOOL, OPT_PERSTREAM | >> OPT_EXPERT | OPT_INPUT, >> + { .off = OFFSET(apply_cropping) }, >> + "apply frame cropping" }, > > Any reason why it can't be enabled by default? Is is. Look at the line above the relevant MATCH_PER_STREAM_OPT line. > >> { "fix_sub_duration_heartbeat", OPT_TYPE_BOOL, OPT_VIDEO | >> OPT_EXPERT | OPT_PERSTREAM | OPT_OUTPUT, >> { .off = OFFSET(fix_sub_duration_heartbeat) }, >> "set this video output stream to be a heartbeat stream for " > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2024-05-30 1:05 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-05-29 21:46 [FFmpeg-devel] [PATCH 1/6] avcodec/packet: add a decoded frame cropping side data type James Almer 2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 2/6] avformat/dump: print Frame Cropping side data info James Almer 2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 3/6] avformat/matroskadec: export cropping values James Almer 2024-06-01 11:24 ` Kacper Michajlow 2024-07-05 20:51 ` James Almer 2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 4/6] avformat/matroskaenc: support writing " James Almer 2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 5/6] fftools/ffmpeg: support applying container level cropping James Almer 2024-05-30 1:01 ` Lynne via ffmpeg-devel 2024-05-30 1:04 ` James Almer [this message] 2024-05-31 1:13 ` Lynne via ffmpeg-devel 2024-05-30 22:57 ` Michael Niedermayer 2024-05-30 23:22 ` [FFmpeg-devel] [PATCH 1/2 v2] " James Almer 2024-06-25 10:25 ` Anton Khirnov 2024-06-25 12:38 ` James Almer 2024-06-25 13:12 ` Anton Khirnov 2024-06-25 13:23 ` Paul B Mahol 2024-06-25 13:54 ` Anton Khirnov 2024-06-25 10:19 ` [FFmpeg-devel] [PATCH 5/6] " Anton Khirnov 2024-07-02 16:49 ` [FFmpeg-devel] [PATCH 5/6 v3] " James Almer 2024-07-02 17:55 ` Anton Khirnov 2024-07-02 18:43 ` James Almer 2024-07-02 19:00 ` Anton Khirnov 2024-05-29 21:46 ` [FFmpeg-devel] [PATCH 6/6] fftools/ffplay: " James Almer 2024-05-30 1:02 ` [FFmpeg-devel] [PATCH 1/6] avcodec/packet: add a decoded frame cropping side data type Lynne via ffmpeg-devel 2024-05-30 1:08 ` James Almer 2024-06-25 18:13 ` Andreas Rheinhardt 2024-06-25 18:17 ` James Almer
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=8d670e76-1b41-4139-b8dc-d00a1aae75bc@gmail.com \ --to=jamrial@gmail.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git