From: "Xiang, Haihao" <haihao.xiang-at-intel.com@ffmpeg.org>
To: "ffmpeg-devel@ffmpeg.org" <ffmpeg-devel@ffmpeg.org>
Subject: Re: [FFmpeg-devel] [PATCH] libavcodec/qsvenc: Add min/max QP control options for I/P/B frame
Date: Wed, 25 May 2022 07:26:09 +0000
Message-ID: <5ae262aece22b9a0e0972b70ceea967eb6d7e9d0.camel@intel.com> (raw)
In-Reply-To: <20220506021956.2277740-1-wenbin.chen@intel.com>
On Fri, 2022-05-06 at 10:19 +0800, Wenbin Chen wrote:
> From: Yue Heng <yue.heng@intel.com>
>
> To do more accurate QP control, add min/max QP control on I/P/B frame
> separately to qsv encoder. qmax and qmin still work but newly-added
> options have higher priority.
>
> Signed-off-by: Yue Heng <yue.heng@intel.com>
> Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
> ---
> doc/encoders.texi | 18 ++++++++++++++++++
> libavcodec/qsvenc.c | 21 +++++++++++++++++++--
> libavcodec/qsvenc.h | 12 ++++++++++++
> 3 files changed, 49 insertions(+), 2 deletions(-)
>
> diff --git a/doc/encoders.texi b/doc/encoders.texi
> index 966032a720..86bcdbc04b 100644
> --- a/doc/encoders.texi
> +++ b/doc/encoders.texi
> @@ -3282,6 +3282,24 @@ Forcing I frames as IDR frames.
>
> @item @var{low_power}
> For encoders set this flag to ON to reduce power consumption and GPU usage.
> +
> +@item @var{max_qp_i}
> +Maximum video quantizer scale for I frame.
> +
> +@item @var{min_qp_i}
> +Minimum video quantizer scale for I frame.
> +
> +@item @var{max_qp_p}
> +Maximum video quantizer scale for P frame.
> +
> +@item @var{min_qp_p}
> +Minimum video quantizer scale for P frame.
> +
> +@item @var{max_qp_b}
> +Maximum video quantizer scale for B frame.
> +
> +@item @var{min_qp_b}
> +Minimum video quantizer scale for B frame.
> @end table
>
Are these common options for all codecs ? If not, could you please update your
patch ?
Thanks
Haihao
> @subsection H264 options
> diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c
> index fbb22ca436..a3e9bb4583 100644
> --- a/libavcodec/qsvenc.c
> +++ b/libavcodec/qsvenc.c
> @@ -930,8 +930,13 @@ static int init_video_param(AVCodecContext *avctx,
> QSVEncContext *q)
> q->extco2.BRefType = q->b_strategy ? MFX_B_REF_PYRAMID :
> MFX_B_REF_OFF;
> #endif
> #if QSV_VERSION_ATLEAST(1, 9)
> - if (avctx->qmin >= 0 && avctx->qmax >= 0 && avctx->qmin > avctx-
> >qmax) {
> - av_log(avctx, AV_LOG_ERROR, "qmin and or qmax are set but
> invalid, please make sure min <= max\n");
> + if ((avctx->qmin >= 0 && avctx->qmax >= 0 && avctx->qmin > avctx-
> >qmax) ||
> + (q->max_qp_i >= 0 && q->min_qp_i >= 0 && q->min_qp_i > q-
> >max_qp_i) ||
> + (q->max_qp_p >= 0 && q->min_qp_p >= 0 && q->min_qp_p > q-
> >max_qp_p) ||
> + (q->max_qp_b >= 0 && q->min_qp_b >= 0 && q->min_qp_b > q-
> >max_qp_b)) {
> + av_log(avctx, AV_LOG_ERROR,
> + "qmin and or qmax are set but invalid,"
> + " please make sure min <= max\n");
> return AVERROR(EINVAL);
> }
> if (avctx->qmin >= 0) {
> @@ -942,6 +947,18 @@ static int init_video_param(AVCodecContext *avctx,
> QSVEncContext *q)
> q->extco2.MaxQPI = avctx->qmax > 51 ? 51 : avctx->qmax;
> q->extco2.MaxQPP = q->extco2.MaxQPB = q->extco2.MaxQPI;
> }
> + if (q->min_qp_i >= 0)
> + q->extco2.MinQPI = q->min_qp_i > 51 ? 51 : q->min_qp_i;
> + if (q->max_qp_i >= 0)
> + q->extco2.MaxQPI = q->max_qp_i > 51 ? 51 : q->max_qp_i;
> + if (q->min_qp_p >= 0)
> + q->extco2.MinQPP = q->min_qp_p > 51 ? 51 : q->min_qp_p;
> + if (q->max_qp_p >= 0)
> + q->extco2.MaxQPP = q->max_qp_p > 51 ? 51 : q->max_qp_p;
> + if (q->min_qp_b >= 0)
> + q->extco2.MinQPB = q->min_qp_b > 51 ? 51 : q->min_qp_b;
> + if (q->max_qp_b >= 0)
> + q->extco2.MaxQPB = q->max_qp_b > 51 ? 51 : q->max_qp_b;
> #endif
> if (q->mbbrc >= 0)
> q->extco2.MBBRC = q->mbbrc ? MFX_CODINGOPTION_ON :
> MFX_CODINGOPTION_OFF;
> diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h
> index cb84723dfa..ea05967db5 100644
> --- a/libavcodec/qsvenc.h
> +++ b/libavcodec/qsvenc.h
> @@ -105,6 +105,12 @@
> { "low_power", "enable low power mode(experimental: many limitations by mfx
> version, BRC modes, etc.)", OFFSET(qsv.low_power), AV_OPT_TYPE_BOOL, { .i64 =
> -1}, -1, 1, VE},\
> { "dblk_idc", "This option disable deblocking. It has value in range
> 0~2.", OFFSET(qsv.dblk_idc), AV_OPT_TYPE_INT, { .i64 = 0
> }, 0, 2, VE}, \
> { "low_delay_brc", "Allow to strictly obey avg frame size",
> OFFSET(qsv.low_delay_brc), AV_OPT_TYPE_BOOL,{ .i64 = -1 }, -1, 1, VE
> }, \
> +{ "max_qp_i", "Maximum video quantizer scale for I
> frame", OFFSET(qsv.max_qp_i), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> 1, 51, VE}, \
> +{ "min_qp_i", "Minimum video quantizer scale for I
> frame", OFFSET(qsv.min_qp_i), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> 1, 51, VE}, \
> +{ "max_qp_p", "Maximum video quantizer scale for P
> frame", OFFSET(qsv.max_qp_p), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> 1, 51, VE}, \
> +{ "min_qp_p", "Minimum video quantizer scale for P
> frame", OFFSET(qsv.min_qp_p), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> 1, 51, VE}, \
> +{ "max_qp_b", "Maximum video quantizer scale for B
> frame", OFFSET(qsv.max_qp_b), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> 1, 51, VE}, \
> +{ "min_qp_b", "Minimum video quantizer scale for B
> frame", OFFSET(qsv.min_qp_b), AV_OPT_TYPE_INT, { .i64 = -1 }, -
> 1, 51, VE}, \
>
> extern const AVCodecHWConfigInternal *const ff_qsv_enc_hw_configs[];
>
> @@ -218,6 +224,12 @@ typedef struct QSVEncContext {
> SetEncodeCtrlCB *set_encode_ctrl_cb;
> int forced_idr;
> int low_delay_brc;
> + int max_qp_i;
> + int min_qp_i;
> + int max_qp_p;
> + int min_qp_p;
> + int max_qp_b;
> + int min_qp_b;
> } QSVEncContext;
>
> int ff_qsv_enc_init(AVCodecContext *avctx, QSVEncContext *q);
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-05-25 7:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-06 2:19 Wenbin Chen
2022-05-25 7:26 ` Xiang, Haihao [this message]
2022-05-25 12:44 ` Chen, Wenbin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5ae262aece22b9a0e0972b70ceea967eb6d7e9d0.camel@intel.com \
--to=haihao.xiang-at-intel.com@ffmpeg.org \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git