From: "Rémi Denis-Courmont" <remi@remlab.net> To: ffmpeg-devel@ffmpeg.org Subject: Re: [FFmpeg-devel] [PATCH 22/26] lavc/fmtconvert: RISC-V V int32_to_float_fmul_scalar Date: Tue, 20 Sep 2022 18:12:17 +0300 Message-ID: <4425931.LvFx2qVVIh@basile.remlab.net> (raw) In-Reply-To: <GV1P250MB073785338631F056948ADE898F4C9@GV1P250MB0737.EURP250.PROD.OUTLOOK.COM> Le tiistaina 20. syyskuuta 2022, 18.00.09 EEST Andreas Rheinhardt a écrit : > remi@remlab.net: > > From: Rémi Denis-Courmont <remi@remlab.net> > > > > --- > > > > libavcodec/fmtconvert.c | 2 ++ > > libavcodec/fmtconvert.h | 1 + > > libavcodec/riscv/Makefile | 2 ++ > > libavcodec/riscv/fmtconvert_init.c | 41 ++++++++++++++++++++++++++++++ > > libavcodec/riscv/fmtconvert_rvv.S | 40 +++++++++++++++++++++++++++++ > > 5 files changed, 86 insertions(+) > > create mode 100644 libavcodec/riscv/fmtconvert_init.c > > create mode 100644 libavcodec/riscv/fmtconvert_rvv.S > > > > diff --git a/libavcodec/fmtconvert.c b/libavcodec/fmtconvert.c > > index 00f55f8f1e..8dcef82ee3 100644 > > --- a/libavcodec/fmtconvert.c > > +++ b/libavcodec/fmtconvert.c > > @@ -53,6 +53,8 @@ av_cold void ff_fmt_convert_init(FmtConvertContext *c, > > AVCodecContext *avctx)> > > ff_fmt_convert_init_arm(c, avctx); > > > > #elif ARCH_PPC > > > > ff_fmt_convert_init_ppc(c, avctx); > > > > +#elif ARCH_RISCV > > + ff_fmt_convert_init_riscv(c, avctx); > > > > #elif ARCH_X86 > > > > ff_fmt_convert_init_x86(c, avctx); > > > > #endif > > > > diff --git a/libavcodec/fmtconvert.h b/libavcodec/fmtconvert.h > > index b2df7a9629..ca51d0861a 100644 > > --- a/libavcodec/fmtconvert.h > > +++ b/libavcodec/fmtconvert.h > > @@ -61,6 +61,7 @@ void ff_fmt_convert_init(FmtConvertContext *c, > > AVCodecContext *avctx);> > > void ff_fmt_convert_init_aarch64(FmtConvertContext *c, AVCodecContext > > *avctx); void ff_fmt_convert_init_arm(FmtConvertContext *c, > > AVCodecContext *avctx); void ff_fmt_convert_init_ppc(FmtConvertContext > > *c, AVCodecContext *avctx);> > > +void ff_fmt_convert_init_riscv(FmtConvertContext *c, AVCodecContext > > *avctx);> > > void ff_fmt_convert_init_x86(FmtConvertContext *c, AVCodecContext > > *avctx); > > void ff_fmt_convert_init_mips(FmtConvertContext *c); > > > > diff --git a/libavcodec/riscv/Makefile b/libavcodec/riscv/Makefile > > index 99541b075e..682174e875 100644 > > --- a/libavcodec/riscv/Makefile > > +++ b/libavcodec/riscv/Makefile > > @@ -1,5 +1,7 @@ > > > > OBJS-$(CONFIG_AUDIODSP) += riscv/audiodsp_init.o \ > > > > riscv/audiodsp_rvf.o > > > > RVV-OBJS-$(CONFIG_AUDIODSP) += riscv/audiodsp_rvv.o > > > > +OBJS-$(CONFIG_FMTCONVERT) += riscv/fmtconvert_init.o > > +RVV-OBJS-$(CONFIG_FMTCONVERT) += riscv/fmtconvert_rvv.o > > > > OBJS-$(CONFIG_PIXBLOCKDSP) += riscv/pixblockdsp_init.o \ > > > > riscv/pixblockdsp_rvi.o > > > > diff --git a/libavcodec/riscv/fmtconvert_init.c > > b/libavcodec/riscv/fmtconvert_init.c new file mode 100644 > > index 0000000000..aa7d44ff5a > > --- /dev/null > > +++ b/libavcodec/riscv/fmtconvert_init.c > > @@ -0,0 +1,41 @@ > > +/* > > + * Copyright © 2022 Rémi Denis-Courmont. > > + * > > + * This file is part of FFmpeg. > > + * > > + * FFmpeg is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU Lesser General Public > > + * License as published by the Free Software Foundation; either > > + * version 2.1 of the License, or (at your option) any later version. > > + * > > + * FFmpeg is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > + * Lesser General Public License for more details. > > + * > > + * You should have received a copy of the GNU Lesser General Public > > + * License along with FFmpeg; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > > 02110-1301 USA + */ > > + > > +#include <stdint.h> > > + > > +#include "config.h" > > +#include "libavutil/attributes.h" > > +#include "libavutil/cpu.h" > > +#include "libavcodec/avcodec.h" > > +#include "libavcodec/fmtconvert.h" > > + > > +void ff_int32_to_float_fmul_scalar_rvv(float *dst, const int32_t *src, > > + float mul, int len); > > + > > +av_cold void ff_fmt_convert_init_riscv(FmtConvertContext *c, > > + AVCodecContext *avctx) > > +{ > > +#ifdef HAVE_RVV > > + int flags = av_get_cpu_flags(); > > + > > + if (flags & AV_CPU_FLAG_RV_ZVE32F) > > + c->int32_to_float_fmul_scalar = > > ff_int32_to_float_fmul_scalar_rvv; > > If you added {} in this patch, you would not need to rewrite the if-line > in the next patch. I know, right... But in the review of the first version review, I was requested to stick to the coding style in an essentially identical scenario: http://ffmpeg.org/pipermail/ffmpeg-devel/2022-September/300894.html > > > +#endif > > +} > > diff --git a/libavcodec/riscv/fmtconvert_rvv.S > > b/libavcodec/riscv/fmtconvert_rvv.S new file mode 100644 > > index 0000000000..c19b77e38a > > --- /dev/null > > +++ b/libavcodec/riscv/fmtconvert_rvv.S > > @@ -0,0 +1,40 @@ > > +/* > > + * Copyright © 2022 Rémi Denis-Courmont. > > + * > > + * This file is part of FFmpeg. > > + * > > + * FFmpeg is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU Lesser General Public > > + * License as published by the Free Software Foundation; either > > + * version 2.1 of the License, or (at your option) any later version. > > + * > > + * FFmpeg is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > + * Lesser General Public License for more details. > > + * > > + * You should have received a copy of the GNU Lesser General Public > > + * License along with FFmpeg; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > > 02110-1301 USA + */ > > + > > +#include "config.h" > > +#include "../libavutil/riscv/asm.S" > > + > > +func ff_int32_to_float_fmul_scalar_rvv, zve32f > > +NOHWF fmv.w.x fa0, a2 > > +NOHWF mv a2, a3 > > +1: > > + vsetvli t0, a2, e32, m1, ta, ma > > + vle32.v v24, (a1) > > + slli t1, t0, 2 > > + vfcvt.f.x.v v24, v24 > > + sub a2, a2, t0 > > + vfmul.vf v24, v24, fa0 > > + add a1, a1, t1 > > + vse32.v v24, (a0) > > + add a0, a0, t1 > > + bnez a2, 1b > > + > > + ret > > +endfunc > > Notice that there will be a slight conflict with > https://ffmpeg.org/pipermail/ffmpeg-devel/2022-September/301710.html; > but it is trivial to fix. Just don't forget to remove the avcodec.h > inclusion. > > - Andreas > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". -- Реми Дёни-Курмон http://www.remlab.net/ _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2022-09-20 15:12 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-20 14:39 [FFmpeg-devel] [PATCHv3 00/26] RISC-V CPU extensions Rémi Denis-Courmont 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 01/26] lavu/cpu: detect RISC-V base extensions remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 02/26] lavu/riscv: initial common header for assembler macros remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 03/26] lavc/audiodsp: RISC-V F vector_clipf remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 04/26] lavc/pixblockdsp: RISC-V I get_pixels remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 05/26] lavu/cpu: CPU flags for the RISC-V Vector extension remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 06/26] configure: probe " remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 07/26] lavu/floatdsp: RISC-V V vector_fmul_scalar remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 08/26] lavu/floatdsp: RISC-V V vector_dmul_scalar remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 09/26] lavu/floatdsp: RISC-V V vector_fmul remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 10/26] lavu/floatdsp: RISC-V V vector_dmul remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 11/26] lavu/floatdsp: RISC-V V vector_fmac_scalar remi 2022-09-20 14:39 ` [FFmpeg-devel] [PATCH 12/26] lavu/floatdsp: RISC-V V vector_dmac_scalar remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 13/26] lavu/floatdsp: RISC-V V vector_fmul_add remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 14/26] lavu/floatdsp: RISC-V V butterflies_float remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 15/26] lavu/floatdsp: RISC-V V vector_fmul_reversed remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 16/26] lavu/floatdsp: RISC-V V vector_fmul_window remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 17/26] lavu/floatdsp: RISC-V V scalarproduct_float remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 18/26] lavu/fixeddsp: RISC-V V butterflies_fixed remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 19/26] lavc/audiodsp: RISC-V V vector_clip_int32 remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 20/26] lavc/audiodsp: RISC-V V vector_clipf remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 21/26] lavc/audiodsp: RISC-V V scalarproduct_int16 remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 22/26] lavc/fmtconvert: RISC-V V int32_to_float_fmul_scalar remi 2022-09-20 15:00 ` Andreas Rheinhardt 2022-09-20 15:12 ` Rémi Denis-Courmont [this message] 2022-09-21 14:14 ` [FFmpeg-devel] [PATCH 22 bis/26] " remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 23/26] lavc/fmtconvert: RISC-V V int32_to_float_fmul_array8 remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 24/26] lavc/vorbisdsp: RISC-V V inverse_coupling remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 25/26] lavc/aacpsdsp: RISC-V V add_squares remi 2022-09-20 14:40 ` [FFmpeg-devel] [PATCH 26/26] lavc/aacpsdsp: RISC-V V mul_pair_single remi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4425931.LvFx2qVVIh@basile.remlab.net \ --to=remi@remlab.net \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git