From: "Xiang, Haihao" <haihao.xiang-at-intel.com@ffmpeg.org>
To: "ffmpeg-devel@ffmpeg.org" <ffmpeg-devel@ffmpeg.org>
Cc: "Wu, Tong1" <tong1.wu@intel.com>
Subject: Re: [FFmpeg-devel] [PATCH 5/5] avcodec/dxva2(h264|mpeg2|vc1): use av_assert0 instead of assert
Date: Wed, 27 Dec 2023 05:45:06 +0000
Message-ID: <2c10e98c2536daf1e35995d81bf8e235b1d95927.camel@intel.com> (raw)
In-Reply-To: <20231225141859.664-5-tong1.wu@intel.com>
On Ma, 2023-12-25 at 22:18 +0800, Tong Wu wrote:
> Signed-off-by: Tong Wu <tong1.wu@intel.com>
> ---
> libavcodec/dxva2.c | 6 +++---
> libavcodec/dxva2_h264.c | 16 ++++++++--------
> libavcodec/dxva2_mpeg2.c | 2 +-
> libavcodec/dxva2_vc1.c | 2 +-
> 4 files changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/libavcodec/dxva2.c b/libavcodec/dxva2.c
> index 7160a0008b..c60393a60b 100644
> --- a/libavcodec/dxva2.c
> +++ b/libavcodec/dxva2.c
> @@ -20,10 +20,10 @@
> * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
> USA
> */
>
> -#include <assert.h>
> #include <string.h>
> #include <initguid.h>
>
> +#include "libavutil/avassert.h"
> #include "libavutil/common.h"
> #include "libavutil/log.h"
> #include "libavutil/time.h"
> @@ -795,7 +795,7 @@ unsigned ff_dxva2_get_surface_index(const AVCodecContext
> *avctx,
> }
> #endif
>
> - assert(0);
> + av_assert0(0);
The assertion in ff_d3d12va_get_surface_index() was removed in patch 4/5, could
you remove this assertion too ?
Thanks
Haihao
> return 0;
> }
>
> @@ -1012,7 +1012,7 @@ int ff_dxva2_common_end_frame(AVCodecContext *avctx,
> AVFrame *frame,
>
> /* TODO Film Grain when possible */
>
> - assert(buffer_count == 1 + (qm_size > 0) + 2);
> + av_assert0(buffer_count == 1 + (qm_size > 0) + 2);
>
> #if CONFIG_D3D11VA
> if (ff_dxva2_is_d3d11(avctx))
> diff --git a/libavcodec/dxva2_h264.c b/libavcodec/dxva2_h264.c
> index e0ec4878a7..0fe4152625 100644
> --- a/libavcodec/dxva2_h264.c
> +++ b/libavcodec/dxva2_h264.c
> @@ -44,7 +44,7 @@ struct dxva2_picture_context {
> static void fill_picture_entry(DXVA_PicEntry_H264 *pic,
> unsigned index, unsigned flag)
> {
> - assert((index&0x7f) == index && (flag&0x01) == flag);
> + av_assert0((index&0x7f) == index && (flag&0x01) == flag);
> pic->bPicEntry = index | (flag << 7);
> }
>
> @@ -194,8 +194,8 @@ void ff_dxva2_h264_fill_scaling_lists(const AVCodecContext
> *avctx, AVDXVAContext
>
> static int is_slice_short(const AVCodecContext *avctx, AVDXVAContext *ctx)
> {
> - assert(DXVA_CONTEXT_CFG_BITSTREAM(avctx, ctx) == 1 ||
> - DXVA_CONTEXT_CFG_BITSTREAM(avctx, ctx) == 2);
> + av_assert0(DXVA_CONTEXT_CFG_BITSTREAM(avctx, ctx) == 1 ||
> + DXVA_CONTEXT_CFG_BITSTREAM(avctx, ctx) == 2);
> return DXVA_CONTEXT_CFG_BITSTREAM(avctx, ctx) == 2;
> }
>
> @@ -348,10 +348,10 @@ static int
> commit_bitstream_and_slice_buffer(AVCodecContext *avctx,
> static const unsigned start_code_size = sizeof(start_code);
> unsigned position, size;
>
> - assert(offsetof(DXVA_Slice_H264_Short, BSNALunitDataLocation) ==
> - offsetof(DXVA_Slice_H264_Long, BSNALunitDataLocation));
> - assert(offsetof(DXVA_Slice_H264_Short, SliceBytesInBuffer) ==
> - offsetof(DXVA_Slice_H264_Long, SliceBytesInBuffer));
> + av_assert0(offsetof(DXVA_Slice_H264_Short, BSNALunitDataLocation) ==
> + offsetof(DXVA_Slice_H264_Long, BSNALunitDataLocation));
> + av_assert0(offsetof(DXVA_Slice_H264_Short, SliceBytesInBuffer) ==
> + offsetof(DXVA_Slice_H264_Long, SliceBytesInBuffer));
>
> if (is_slice_short(avctx, ctx))
> slice = &ctx_pic->slice_short[i];
> @@ -453,7 +453,7 @@ static int dxva2_h264_start_frame(AVCodecContext *avctx,
>
> if (!DXVA_CONTEXT_VALID(avctx, ctx))
> return -1;
> - assert(ctx_pic);
> + av_assert0(ctx_pic);
>
> /* Fill up DXVA_PicParams_H264 */
> ff_dxva2_h264_fill_picture_parameters(avctx, ctx, &ctx_pic->pp);
> diff --git a/libavcodec/dxva2_mpeg2.c b/libavcodec/dxva2_mpeg2.c
> index 4c9ed1d761..d31a8bb872 100644
> --- a/libavcodec/dxva2_mpeg2.c
> +++ b/libavcodec/dxva2_mpeg2.c
> @@ -264,7 +264,7 @@ static int dxva2_mpeg2_start_frame(AVCodecContext *avctx,
>
> if (!DXVA_CONTEXT_VALID(avctx, ctx))
> return -1;
> - assert(ctx_pic);
> + av_assert0(ctx_pic);
>
> ff_dxva2_mpeg2_fill_picture_parameters(avctx, ctx, &ctx_pic->pp);
> ff_dxva2_mpeg2_fill_quantization_matrices(avctx, ctx, &ctx_pic->qm);
> diff --git a/libavcodec/dxva2_vc1.c b/libavcodec/dxva2_vc1.c
> index 2b1b3f97ea..f7513b2b15 100644
> --- a/libavcodec/dxva2_vc1.c
> +++ b/libavcodec/dxva2_vc1.c
> @@ -321,7 +321,7 @@ static int dxva2_vc1_start_frame(AVCodecContext *avctx,
>
> if (!DXVA_CONTEXT_VALID(avctx, ctx))
> return -1;
> - assert(ctx_pic);
> + av_assert0(ctx_pic);
>
> ff_dxva2_vc1_fill_picture_parameters(avctx, ctx, &ctx_pic->pp);
>
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2023-12-27 5:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-25 14:18 [FFmpeg-devel] [PATCH 1/5] avcodec/d3d12va_vp9: fix vp9 max_num_refs value Tong Wu
2023-12-25 14:18 ` [FFmpeg-devel] [PATCH 2/5] avcodec/d3d12va_decode: delete an empty line and fix a fuction alignment Tong Wu
2023-12-25 14:18 ` [FFmpeg-devel] [PATCH 3/5] avcodec/d3d12va_h264: replace assert with av_assert0 Tong Wu
2023-12-25 14:18 ` [FFmpeg-devel] [PATCH 4/5] avcodec/d3d12va_decode: remove assertion from get_surface_index Tong Wu
2023-12-27 5:42 ` Xiang, Haihao
2023-12-25 14:18 ` [FFmpeg-devel] [PATCH 5/5] avcodec/dxva2(h264|mpeg2|vc1): use av_assert0 instead of assert Tong Wu
2023-12-27 5:45 ` Xiang, Haihao [this message]
2023-12-25 14:47 ` [FFmpeg-devel] 回复: [PATCH 1/5] avcodec/d3d12va_vp9: fix vp9 max_num_refs value Wu Jianhua
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2c10e98c2536daf1e35995d81bf8e235b1d95927.camel@intel.com \
--to=haihao.xiang-at-intel.com@ffmpeg.org \
--cc=ffmpeg-devel@ffmpeg.org \
--cc=tong1.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git