From: James Almer <jamrial@gmail.com> To: ffmpeg-devel@ffmpeg.org Subject: Re: [FFmpeg-devel] [PATCH v7 3/4] avcodec/hevc: Add alpha layer support Date: Tue, 11 Feb 2025 13:02:34 -0300 Message-ID: <28524fa6-3fbb-4a81-bf20-ca840d267bed@gmail.com> (raw) In-Reply-To: <tencent_26A94ECE70702DF69A92404E9A7D9F62AB08@qq.com> [-- Attachment #1.1.1: Type: text/plain, Size: 9497 bytes --] On 2/11/2025 12:57 PM, Zhao Zhili wrote: > > >> On Feb 11, 2025, at 23:37, Andreas Rheinhardt <andreas.rheinhardt@outlook.com> wrote: >> >> Zhao Zhili: >>> From: Zhao Zhili <zhilizhao@tencent.com> >>> >>> Signed-off-by: Zhao Zhili <zhilizhao@tencent.com> >>> --- >>> libavcodec/hevc/hevcdec.c | 73 ++++++++++++++++++++++++++++++++++++++- >>> libavcodec/hevc/hevcdec.h | 2 ++ >>> libavcodec/hevc/refs.c | 35 ++++++++++++++++++- >>> 3 files changed, 108 insertions(+), 2 deletions(-) >>> >>> diff --git a/libavcodec/hevc/hevcdec.c b/libavcodec/hevc/hevcdec.c >>> index e9c045f7a1..f71edf213b 100644 >>> --- a/libavcodec/hevc/hevcdec.c >>> +++ b/libavcodec/hevc/hevcdec.c >>> @@ -466,6 +466,25 @@ static int export_multilayer(HEVCContext *s, const HEVCVPS *vps) >>> return 0; >>> } >>> >>> +int ff_hevc_is_alpha_video(const HEVCContext *s) >>> +{ >>> + const HEVCVPS *vps = s->vps; >>> + int ret = 0; >>> + >>> + if (vps->nb_layers != 2 || !vps->layer_id_in_nuh[1]) >>> + return 0; >>> + >>> + /* decode_vps_ext() guarantees that SCALABILITY_AUXILIARY with AuxId other >>> + * than alpha cannot reach here. >>> + */ >>> + ret = (s->vps->scalability_mask_flag & HEVC_SCALABILITY_AUXILIARY); >>> + >>> + av_log(s->avctx, AV_LOG_DEBUG, "Multi layer video, %s alpha video\n", >>> + ret ? "is" : "not"); >>> + >>> + return ret; >>> +} >>> + >>> static int setup_multilayer(HEVCContext *s, const HEVCVPS *vps) >>> { >>> unsigned layers_active_output = 0, highest_layer; >>> @@ -473,6 +492,18 @@ static int setup_multilayer(HEVCContext *s, const HEVCVPS *vps) >>> s->layers_active_output = 1; >>> s->layers_active_decode = 1; >>> >>> + if (ff_hevc_is_alpha_video(s)) { >>> + const AVPixFmtDescriptor *desc = av_pix_fmt_desc_get(s->avctx->pix_fmt); >>> + >>> + if (!(desc->flags & AV_PIX_FMT_FLAG_ALPHA)) >>> + return 0; >>> + >>> + s->layers_active_decode = (1 << vps->nb_layers) - 1; >>> + s->layers_active_output = 1; >>> + >>> + return 0; >>> + } >>> + >>> // nothing requested - decode base layer only >>> if (!s->nb_view_ids) >>> return 0; >>> @@ -530,6 +561,34 @@ static int setup_multilayer(HEVCContext *s, const HEVCVPS *vps) >>> return 0; >>> } >>> >>> +static enum AVPixelFormat map_to_alpha_format(HEVCContext *s, >>> + enum AVPixelFormat pix_fmt) >>> +{ >>> + switch (pix_fmt) { >>> + case AV_PIX_FMT_YUV420P: >>> + case AV_PIX_FMT_YUVJ420P: >>> + return AV_PIX_FMT_YUVA420P; >>> + case AV_PIX_FMT_YUV420P10: >>> + return AV_PIX_FMT_YUVA420P10; >>> + case AV_PIX_FMT_YUV444P: >>> + return AV_PIX_FMT_YUVA444P; >>> + case AV_PIX_FMT_YUV422P: >>> + return AV_PIX_FMT_YUVA422P; >>> + case AV_PIX_FMT_YUV422P10LE: >>> + return AV_PIX_FMT_YUVA422P10LE; >>> + case AV_PIX_FMT_YUV444P10: >>> + return AV_PIX_FMT_YUVA444P10; >>> + case AV_PIX_FMT_YUV444P12: >>> + return AV_PIX_FMT_YUVA444P12; >>> + case AV_PIX_FMT_YUV422P12: >>> + return AV_PIX_FMT_YUVA422P12; >>> + default: >>> + av_log(s->avctx, AV_LOG_WARNING, "No alpha pixel format map for %s\n", >>> + av_get_pix_fmt_name(pix_fmt)); >>> + return AV_PIX_FMT_NONE; >>> + } >>> +} >>> + >>> static enum AVPixelFormat get_format(HEVCContext *s, const HEVCSPS *sps) >>> { >>> #define HWACCEL_MAX (CONFIG_HEVC_DXVA2_HWACCEL + \ >>> @@ -540,9 +599,13 @@ static enum AVPixelFormat get_format(HEVCContext *s, const HEVCSPS *sps) >>> CONFIG_HEVC_VIDEOTOOLBOX_HWACCEL + \ >>> CONFIG_HEVC_VDPAU_HWACCEL + \ >>> CONFIG_HEVC_VULKAN_HWACCEL) >>> - enum AVPixelFormat pix_fmts[HWACCEL_MAX + 2], *fmt = pix_fmts; >>> + enum AVPixelFormat pix_fmts[HWACCEL_MAX + 3], *fmt = pix_fmts; >>> + enum AVPixelFormat alpha_fmt = AV_PIX_FMT_NONE; >>> int ret; >>> >>> + if (ff_hevc_is_alpha_video(s)) >>> + alpha_fmt = map_to_alpha_format(s, sps->pix_fmt); >>> + >>> switch (sps->pix_fmt) { >>> case AV_PIX_FMT_YUV420P: >>> case AV_PIX_FMT_YUVJ420P: >>> @@ -664,6 +727,8 @@ static enum AVPixelFormat get_format(HEVCContext *s, const HEVCSPS *sps) >>> break; >>> } >>> >>> + if (alpha_fmt != AV_PIX_FMT_NONE) >>> + *fmt++ = alpha_fmt; >>> *fmt++ = sps->pix_fmt; >>> *fmt = AV_PIX_FMT_NONE; >>> >>> @@ -3194,6 +3259,12 @@ static int hevc_frame_start(HEVCContext *s, HEVCLayerContext *l, >>> !sps->vui.common.video_signal_type_present_flag) >>> pix_fmt = sps_base->pix_fmt; >>> >>> + // Ignore range mismatch between base layer and alpha layer >>> + if (ff_hevc_is_alpha_video(s) && >>> + sps_base->pix_fmt == AV_PIX_FMT_YUV420P && >>> + pix_fmt == AV_PIX_FMT_YUVJ420P) >>> + pix_fmt = sps_base->pix_fmt; >>> + >>> if (pix_fmt != sps_base->pix_fmt || >>> sps->width != sps_base->width || >>> sps->height != sps_base->height) { >>> diff --git a/libavcodec/hevc/hevcdec.h b/libavcodec/hevc/hevcdec.h >>> index 4e95035688..b2b725b5cd 100644 >>> --- a/libavcodec/hevc/hevcdec.h >>> +++ b/libavcodec/hevc/hevcdec.h >>> @@ -714,6 +714,8 @@ void ff_hevc_hls_residual_coding(HEVCLocalContext *lc, const HEVCPPS *pps, >>> >>> void ff_hevc_hls_mvd_coding(HEVCLocalContext *lc, int x0, int y0, int log2_cb_size); >>> >>> +int ff_hevc_is_alpha_video(const HEVCContext *s); >>> + >>> extern const uint8_t ff_hevc_qpel_extra_before[4]; >>> extern const uint8_t ff_hevc_qpel_extra_after[4]; >>> extern const uint8_t ff_hevc_qpel_extra[4]; >>> diff --git a/libavcodec/hevc/refs.c b/libavcodec/hevc/refs.c >>> index dd7f7f95a8..6f10efd0ac 100644 >>> --- a/libavcodec/hevc/refs.c >>> +++ b/libavcodec/hevc/refs.c >>> @@ -79,6 +79,31 @@ void ff_hevc_flush_dpb(HEVCContext *s) >>> } >>> } >>> >>> +static int replace_alpha_plane(AVFrame *alpha, AVFrame *base) >>> +{ >>> + AVBufferRef *base_a = av_frame_get_plane_buffer(base, 3); >>> + uintptr_t data = (uintptr_t)alpha->data[0]; >>> + int ret; >>> + >>> + for (int i = 0; i < FF_ARRAY_ELEMS(alpha->buf) && alpha->buf[i]; i++) { >>> + AVBufferRef *buf = alpha->buf[i]; >>> + uintptr_t buf_begin = (uintptr_t)buf->data; >>> + >>> + if (data >= buf_begin && data < buf_begin + buf->size) { >>> + ret = av_buffer_replace(&alpha->buf[i], base_a); >>> + if (ret < 0) >>> + return ret; >>> + >>> + alpha->linesize[0] = base->linesize[3]; >>> + alpha->data[0] = base->data[3]; >>> + >>> + return 0; >>> + } >>> + } >> >> Why does the decoding process actually need multiple references to the >> buffer of the alpha plane? > > I’m not sure if I understand your question correctly. > > 1. Both the base layer and the alpha layer are decoded as yuv420p. > 2. The y plane of alpha layer is actually alpha. > 3. The decoder finally output yuva, not two yuv420p. > > So here make y plane of alpha frame reference the alpha plane of base frame. > When output, the base frame will contain YUV and alpha from two layers. The loop makes it look like you're potentially creating references to base_a in all buf[] entries from alpha, when all you need is one in alpha->buf[0], right? > >> >>> + >>> + return AVERROR_BUG; >>> +} >>> + >>> static HEVCFrame *alloc_frame(HEVCContext *s, HEVCLayerContext *l) >>> { >>> const HEVCVPS *vps = l->sps->vps; >>> @@ -103,7 +128,7 @@ static HEVCFrame *alloc_frame(HEVCContext *s, HEVCLayerContext *l) >>> } >>> >>> // add view ID side data if it's nontrivial >>> - if (vps->nb_layers > 1 || view_id) { >>> + if (!ff_hevc_is_alpha_video(s) && (vps->nb_layers > 1 || view_id)) { >>> HEVCSEITDRDI *tdrdi = &s->sei.tdrdi; >>> AVFrameSideData *sd = av_frame_side_data_new(&frame->f->side_data, >>> &frame->f->nb_side_data, >>> @@ -161,7 +186,15 @@ static HEVCFrame *alloc_frame(HEVCContext *s, HEVCLayerContext *l) >>> if (ret < 0) >>> goto fail; >>> >>> + >>> frame->pps = av_refstruct_ref_c(s->pps); >>> + if (l != &s->layers[0] && ff_hevc_is_alpha_video(s)) { >>> + AVFrame *alpha = frame->f; >>> + AVFrame *base = s->layers[0].cur_frame->f; >>> + ret = replace_alpha_plane(alpha, base); >>> + if (ret < 0) >>> + goto fail; >>> + } >>> >>> return frame; >>> fail: >> >> _______________________________________________ >> ffmpeg-devel mailing list >> ffmpeg-devel@ffmpeg.org >> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel >> >> To unsubscribe, visit link above, or email >> ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe". [-- Attachment #1.2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 495 bytes --] [-- Attachment #2: Type: text/plain, Size: 251 bytes --] _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2025-02-11 16:02 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2025-02-11 13:21 Zhao Zhili 2025-02-11 15:37 ` Andreas Rheinhardt 2025-02-11 15:57 ` Zhao Zhili 2025-02-11 16:02 ` James Almer [this message] 2025-02-11 16:11 ` Zhao Zhili 2025-02-11 16:13 ` James Almer 2025-02-11 16:10 ` Andreas Rheinhardt 2025-02-11 16:21 ` Zhao Zhili 2025-02-11 16:25 ` Andreas Rheinhardt 2025-02-11 16:50 ` Zhao Zhili 2025-02-11 16:27 ` James Almer
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=28524fa6-3fbb-4a81-bf20-ca840d267bed@gmail.com \ --to=jamrial@gmail.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git