From: Peter Enderborg <peterend@axis.com> To: <ffmpeg-devel@ffmpeg.org> Cc: Peter Enderborg <peterend@axis.com> Subject: [FFmpeg-devel] [PATCH] avformat/udp: Select output interfaces for ipv6 multicast Date: Tue, 5 Aug 2025 09:56:18 +0200 Message-ID: <20250805075618.1496509-1-peterend@axis.com> (raw) This fixes two old TODO's in ipv6 multicast handling. A helper function to iterate over all interfaces added to help join the multicast group on interface if approperite. The default value is IN6ADDR_ANY (::) and it then joins all interfaces that are up and have multicast support. Local address can be specified and then it join ALL interfaces that use that specific local address. Limitations (TODO's) Handling when network configuration is changed. if up/down etc. Signed-off-by: Peter Enderborg <peterend@axis.com> --- libavformat/udp.c | 108 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 90 insertions(+), 18 deletions(-) diff --git a/libavformat/udp.c b/libavformat/udp.c index 035db785c2..0a981447a5 100644 --- a/libavformat/udp.c +++ b/libavformat/udp.c @@ -68,6 +68,13 @@ #include "libavutil/thread.h" #endif +#if HAVE_STRUCT_IPV6_MREQ && defined(IPPROTO_IPV6) +#include <sys/types.h> +#include <net/if.h> +#include <sys/ioctl.h> +#include <ifaddrs.h> +#endif + #ifndef IPV6_ADD_MEMBERSHIP #define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP #define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP @@ -205,6 +212,79 @@ static int udp_set_multicast_ttl(int sockfd, int mcastTTL, return 0; } +#if HAVE_STRUCT_IPV6_MREQ && defined(IPPROTO_IPV6) +static int udp_ipv6_multicast_iterate(int sockfd, struct sockaddr_in6 *addr, + struct sockaddr_in6 *local_addr, int mop, void *logctx) +{ + struct in6_addr anyipv6 = IN6ADDR_ANY_INIT; + struct ifaddrs *ifal=NULL,*ife=NULL; + int iindex_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_IP); + int membership_changed = 0; + + if (iindex_fd >= 0 && !getifaddrs(&ifal)) { + for(ife=ifal; ife!=NULL; ife=ife->ifa_next) { + if (ife->ifa_addr && + (ife->ifa_addr->sa_family == AF_INET6) && + (ife->ifa_flags & IFF_MULTICAST) && + (ife->ifa_flags & IFF_UP)) { + if ((!memcmp(&local_addr->sin6_addr, &anyipv6, sizeof(struct in6_addr))) || + (!memcmp(&local_addr->sin6_addr, &((struct sockaddr_in6 *)ife->ifa_addr)->sin6_addr, sizeof(struct in6_addr)))) { + struct ifreq if_req; + strncpy(if_req.ifr_name, ife->ifa_name, IFNAMSIZ); + if (ioctl(iindex_fd, SIOCGIFINDEX, &if_req) != -1) { + struct ipv6_mreq mreq6; + memcpy(&mreq6.ipv6mr_multiaddr, &addr->sin6_addr, sizeof(struct in6_addr)); + mreq6.ipv6mr_interface = if_req.ifr_ifindex; + switch (mop) { + case IPV6_JOIN_GROUP: + if (setsockopt(sockfd, IPPROTO_IPV6, IPV6_ADD_MEMBERSHIP, &mreq6, sizeof(mreq6)) == 0) { + membership_changed = 1; + } else { + /* Subscribe for all ipv6 addresses belong to a + interface.It can generate EADDRINUSE but + is accaptable. */ + if (errno != EADDRINUSE) { + ff_log_net_error(logctx, AV_LOG_ERROR, "setsockopt(IPV6_ADD_MEMBERSHIP)"); + goto error; + } + } + break; + case IPV6_LEAVE_GROUP: + if (setsockopt(sockfd, IPPROTO_IPV6, IPV6_DROP_MEMBERSHIP, &mreq6, sizeof(mreq6)) == 0) { + membership_changed = 1; + } else { + /* Unsubscribe for all ipv6 addresses belong to a + interface. Ignore EADDRNOTAVAIL. */ + if (errno != EADDRNOTAVAIL) { + ff_log_net_error(logctx, AV_LOG_ERROR, "setsockopt(IPV6_DROP_MEMBERSHIP)"); + goto error; + } + } + break; + default: + av_log(logctx, AV_LOG_ERROR, "unknown multicast operation\n"); + goto error; + } + } + } + } + } + } + freeifaddrs(ifal); + close(iindex_fd); + + if (!membership_changed) { + av_log(logctx, AV_LOG_ERROR, "no valid interfaces found\n"); + return AVERROR(EINVAL); + } + return 0; +error: + freeifaddrs(ifal); + close(iindex_fd); + av_log(logctx, AV_LOG_ERROR, "udp_ipv6_multicast_iterate failed\n"); + return AVERROR(EINVAL); +} +#endif static int udp_join_multicast_group(int sockfd, struct sockaddr *addr, struct sockaddr *local_addr, void *logctx) @@ -226,15 +306,11 @@ static int udp_join_multicast_group(int sockfd, struct sockaddr *addr, #endif #if HAVE_STRUCT_IPV6_MREQ && defined(IPPROTO_IPV6) if (addr->sa_family == AF_INET6) { - struct ipv6_mreq mreq6; - - memcpy(&mreq6.ipv6mr_multiaddr, &(((struct sockaddr_in6 *)addr)->sin6_addr), sizeof(struct in6_addr)); - //TODO: Interface index should be looked up from local_addr - mreq6.ipv6mr_interface = 0; - if (setsockopt(sockfd, IPPROTO_IPV6, IPV6_ADD_MEMBERSHIP, &mreq6, sizeof(mreq6)) < 0) { - ff_log_net_error(logctx, AV_LOG_ERROR, "setsockopt(IPV6_ADD_MEMBERSHIP)"); - return ff_neterrno(); - } + return udp_ipv6_multicast_iterate(sockfd, + (struct sockaddr_in6 *)addr, + (struct sockaddr_in6 *)local_addr, + IPV6_JOIN_GROUP, + logctx); } #endif return 0; @@ -260,15 +336,11 @@ static int udp_leave_multicast_group(int sockfd, struct sockaddr *addr, #endif #if HAVE_STRUCT_IPV6_MREQ && defined(IPPROTO_IPV6) if (addr->sa_family == AF_INET6) { - struct ipv6_mreq mreq6; - - memcpy(&mreq6.ipv6mr_multiaddr, &(((struct sockaddr_in6 *)addr)->sin6_addr), sizeof(struct in6_addr)); - //TODO: Interface index should be looked up from local_addr - mreq6.ipv6mr_interface = 0; - if (setsockopt(sockfd, IPPROTO_IPV6, IPV6_DROP_MEMBERSHIP, &mreq6, sizeof(mreq6)) < 0) { - ff_log_net_error(logctx, AV_LOG_ERROR, "setsockopt(IPV6_DROP_MEMBERSHIP)"); - return -1; - } + return udp_ipv6_multicast_iterate(sockfd, + (struct sockaddr_in6 *)addr, + (struct sockaddr_in6 *)local_addr, + IPV6_LEAVE_GROUP, + logctx); } #endif return 0; -- 2.34.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2025-08-05 7:56 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2025-08-05 7:56 Peter Enderborg [this message] 2025-08-06 15:28 ` Rémi Denis-Courmont
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20250805075618.1496509-1-peterend@axis.com \ --to=peterend@axis.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git