* [FFmpeg-devel] [PATCH v2 1/3] avcodec/sanm: ignore unknown codecs in FOBJs
@ 2025-02-11 7:24 Manuel Lauss
2025-02-11 7:24 ` [FFmpeg-devel] [PATCH v2 2/3] avcodec/sanm: fobj left/top are signed Manuel Lauss
2025-02-11 7:24 ` [FFmpeg-devel] [PATCH v2 3/3] avcodec/sanm: add smush codec23 decoder Manuel Lauss
0 siblings, 2 replies; 3+ messages in thread
From: Manuel Lauss @ 2025-02-11 7:24 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Manuel Lauss
Don't error out, just ignore unknown codec numbers and pretend
decode succeeded. This is useful for older LucasArts titles
which stack a lot of different FOBJs with different codecs into
a single frame. Mark the frame as corrupt though since we
werent' able to decode everything that is supposed to be visible.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
---
v2: Mark frame as corrupt, suggested by Marton Balint
libavcodec/sanm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/libavcodec/sanm.c b/libavcodec/sanm.c
index c30095ed32..a4f0a28c7c 100644
--- a/libavcodec/sanm.c
+++ b/libavcodec/sanm.c
@@ -1274,7 +1274,8 @@ static int process_frame_obj(SANMVideoContext *ctx)
return old_codec48(ctx, w, h);
default:
avpriv_request_sample(ctx->avctx, "Subcodec %d", codec);
- return AVERROR_PATCHWELCOME;
+ ctx->frame->flags |= AV_FRAME_FLAG_CORRUPT;
+ return 0;
}
}
--
2.48.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
* [FFmpeg-devel] [PATCH v2 2/3] avcodec/sanm: fobj left/top are signed
2025-02-11 7:24 [FFmpeg-devel] [PATCH v2 1/3] avcodec/sanm: ignore unknown codecs in FOBJs Manuel Lauss
@ 2025-02-11 7:24 ` Manuel Lauss
2025-02-11 7:24 ` [FFmpeg-devel] [PATCH v2 3/3] avcodec/sanm: add smush codec23 decoder Manuel Lauss
1 sibling, 0 replies; 3+ messages in thread
From: Manuel Lauss @ 2025-02-11 7:24 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Manuel Lauss
The left and top parameters of an FOBJ are signed values.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
---
v2: no changes.
libavcodec/sanm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/libavcodec/sanm.c b/libavcodec/sanm.c
index a4f0a28c7c..71dbac4320 100644
--- a/libavcodec/sanm.c
+++ b/libavcodec/sanm.c
@@ -1238,8 +1238,8 @@ static int old_codec48(SANMVideoContext *ctx, int width, int height)
static int process_frame_obj(SANMVideoContext *ctx)
{
uint16_t codec = bytestream2_get_le16u(&ctx->gb);
- uint16_t left = bytestream2_get_le16u(&ctx->gb);
- uint16_t top = bytestream2_get_le16u(&ctx->gb);
+ int16_t left = bytestream2_get_le16u(&ctx->gb);
+ int16_t top = bytestream2_get_le16u(&ctx->gb);
uint16_t w = bytestream2_get_le16u(&ctx->gb);
uint16_t h = bytestream2_get_le16u(&ctx->gb);
--
2.48.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
* [FFmpeg-devel] [PATCH v2 3/3] avcodec/sanm: add smush codec23 decoder
2025-02-11 7:24 [FFmpeg-devel] [PATCH v2 1/3] avcodec/sanm: ignore unknown codecs in FOBJs Manuel Lauss
2025-02-11 7:24 ` [FFmpeg-devel] [PATCH v2 2/3] avcodec/sanm: fobj left/top are signed Manuel Lauss
@ 2025-02-11 7:24 ` Manuel Lauss
1 sibling, 0 replies; 3+ messages in thread
From: Manuel Lauss @ 2025-02-11 7:24 UTC (permalink / raw)
To: ffmpeg-devel; +Cc: Manuel Lauss
This codec alternatingly skips and changes existing pixels.
A second 16bit parameter in the FOBJ header indicates how to do
the pixel changes: either by specifying a LUT in the codec datastream
or by adding a constant value to the pixel.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
---
v2: no changes.
Videos showing the before/after state (Rebel Assault II LEV09/09PLAY.SAN file)
http://mlau.at/ffmpeg_c23_before.mp4
http://mlau.at/ffmpeg_c23_after.mp4
notice the blue transparent forcefields.
libavcodec/sanm.c | 62 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 60 insertions(+), 2 deletions(-)
diff --git a/libavcodec/sanm.c b/libavcodec/sanm.c
index 71dbac4320..d5c4191aa5 100644
--- a/libavcodec/sanm.c
+++ b/libavcodec/sanm.c
@@ -292,6 +292,7 @@ typedef struct SANMVideoContext {
int8_t p4x4glyphs[NGLYPHS][16];
int8_t p8x8glyphs[NGLYPHS][64];
uint8_t c47itbl[0x10000];
+ uint8_t c23lut[256];
} SANMVideoContext;
typedef struct SANMFrameHeader {
@@ -555,6 +556,58 @@ static int rle_decode(SANMVideoContext *ctx, uint8_t *dst, const int out_size)
return 0;
}
+static int old_codec23(SANMVideoContext *ctx, int top, int left, int width,
+ int height, uint8_t param, uint16_t param2)
+{
+ const uint32_t maxpxo = ctx->width * ctx->pitch;
+ uint8_t *dst, lut[256], c;
+ int i, j, k, pc, sk;
+ int32_t pxoff;
+
+ if (param2 == 256) {
+ if (bytestream2_get_bytes_left(&ctx->gb) < 256)
+ return AVERROR_INVALIDDATA;
+ bytestream2_get_bufferu(&ctx->gb, ctx->c23lut, 256);
+ } else if (param2 < 256) {
+ for (i = 0; i < 256; i++)
+ lut[i] = (i + param2) & 0xff;
+ } else {
+ memcpy(lut, ctx->c23lut, 256);
+ }
+ if (bytestream2_get_bytes_left(&ctx->gb) < 1)
+ return 0; /* some c23 frames just set up the LUT */
+
+ dst = (uint8_t *)ctx->frm0;
+ for (i = 0; i < height; i++) {
+ if (bytestream2_get_bytes_left(&ctx->gb) < 2)
+ return 0;
+ pxoff = left + ((top + i) * ctx->pitch);
+ k = bytestream2_get_le16u(&ctx->gb);
+ sk = 1;
+ pc = 0;
+ while (k > 0 && pc <= width) {
+ if (bytestream2_get_bytes_left(&ctx->gb) < 1)
+ return AVERROR_INVALIDDATA;
+ j = bytestream2_get_byteu(&ctx->gb);
+ if (sk) {
+ pxoff += j;
+ pc += j;
+ } else {
+ while (j--) {
+ if (pxoff >=0 && pxoff < maxpxo) {
+ c = *(dst + pxoff);
+ *(dst + pxoff) = lut[c];
+ }
+ pxoff++;
+ pc++;
+ }
+ }
+ sk ^= 1;
+ }
+ }
+ return 0;
+}
+
static int old_codec1(SANMVideoContext *ctx, int top,
int left, int width, int height)
{
@@ -1237,11 +1290,15 @@ static int old_codec48(SANMVideoContext *ctx, int width, int height)
static int process_frame_obj(SANMVideoContext *ctx)
{
- uint16_t codec = bytestream2_get_le16u(&ctx->gb);
+ uint16_t parm2;
+ uint8_t codec = bytestream2_get_byteu(&ctx->gb);
+ uint8_t param = bytestream2_get_byteu(&ctx->gb);
int16_t left = bytestream2_get_le16u(&ctx->gb);
int16_t top = bytestream2_get_le16u(&ctx->gb);
uint16_t w = bytestream2_get_le16u(&ctx->gb);
uint16_t h = bytestream2_get_le16u(&ctx->gb);
+ bytestream2_skip(&ctx->gb, 2);
+ parm2 = bytestream2_get_le16u(&ctx->gb);
if (!w || !h) {
av_log(ctx->avctx, AV_LOG_ERROR, "Dimensions are invalid.\n");
@@ -1260,12 +1317,13 @@ static int process_frame_obj(SANMVideoContext *ctx)
return AVERROR(ENOMEM);
}
}
- bytestream2_skip(&ctx->gb, 4);
switch (codec) {
case 1:
case 3:
return old_codec1(ctx, top, left, w, h);
+ case 23:
+ return old_codec23(ctx, top, left, w, h, param, parm2);
case 37:
return old_codec37(ctx, top, left, w, h);
case 47:
--
2.48.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-02-11 7:25 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-02-11 7:24 [FFmpeg-devel] [PATCH v2 1/3] avcodec/sanm: ignore unknown codecs in FOBJs Manuel Lauss
2025-02-11 7:24 ` [FFmpeg-devel] [PATCH v2 2/3] avcodec/sanm: fobj left/top are signed Manuel Lauss
2025-02-11 7:24 ` [FFmpeg-devel] [PATCH v2 3/3] avcodec/sanm: add smush codec23 decoder Manuel Lauss
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git