From: Anton Khirnov <anton@khirnov.net>
To: ffmpeg-devel@ffmpeg.org
Subject: [FFmpeg-devel] [PATCH 06/39] lavc/hevc/parser: stop using HEVCParamSets.[psv]ps
Date: Fri, 7 Jun 2024 15:01:02 +0200
Message-ID: <20240607130135.9088-6-anton@khirnov.net> (raw)
In-Reply-To: <20240607130135.9088-1-anton@khirnov.net>
The parser does not need to preserve these between frames.
---
libavcodec/hevc/parser.c | 55 ++++++++++++++++++++--------------------
1 file changed, 27 insertions(+), 28 deletions(-)
diff --git a/libavcodec/hevc/parser.c b/libavcodec/hevc/parser.c
index 49f7bccdfa..f4e6e3c36d 100644
--- a/libavcodec/hevc/parser.c
+++ b/libavcodec/hevc/parser.c
@@ -58,6 +58,8 @@ static int hevc_parse_slice_header(AVCodecParserContext *s, H2645NAL *nal,
HEVCParamSets *ps = &ctx->ps;
HEVCSEI *sei = &ctx->sei;
GetBitContext *gb = &nal->gb;
+ const HEVCPPS *pps;
+ const HEVCSPS *sps;
const HEVCWindow *ow;
int i, num = 0, den = 0;
@@ -78,28 +80,25 @@ static int hevc_parse_slice_header(AVCodecParserContext *s, H2645NAL *nal,
av_log(avctx, AV_LOG_ERROR, "PPS id out of range: %d\n", pps_id);
return AVERROR_INVALIDDATA;
}
- ps->pps = ps->pps_list[pps_id];
+ pps = ps->pps_list[pps_id];
+ sps = pps->sps;
- if (ps->sps != ps->pps->sps) {
- ps->sps = ps->pps->sps;
- ps->vps = ps->sps->vps;
- }
- ow = &ps->sps->output_window;
+ ow = &sps->output_window;
- s->coded_width = ps->sps->width;
- s->coded_height = ps->sps->height;
- s->width = ps->sps->width - ow->left_offset - ow->right_offset;
- s->height = ps->sps->height - ow->top_offset - ow->bottom_offset;
- s->format = ps->sps->pix_fmt;
- avctx->profile = ps->sps->ptl.general_ptl.profile_idc;
- avctx->level = ps->sps->ptl.general_ptl.level_idc;
+ s->coded_width = sps->width;
+ s->coded_height = sps->height;
+ s->width = sps->width - ow->left_offset - ow->right_offset;
+ s->height = sps->height - ow->top_offset - ow->bottom_offset;
+ s->format = sps->pix_fmt;
+ avctx->profile = sps->ptl.general_ptl.profile_idc;
+ avctx->level = sps->ptl.general_ptl.level_idc;
- if (ps->vps->vps_timing_info_present_flag) {
- num = ps->vps->vps_num_units_in_tick;
- den = ps->vps->vps_time_scale;
- } else if (ps->sps->vui.vui_timing_info_present_flag) {
- num = ps->sps->vui.vui_num_units_in_tick;
- den = ps->sps->vui.vui_time_scale;
+ if (sps->vps->vps_timing_info_present_flag) {
+ num = sps->vps->vps_num_units_in_tick;
+ den = sps->vps->vps_time_scale;
+ } else if (sps->vui.vui_timing_info_present_flag) {
+ num = sps->vui.vui_num_units_in_tick;
+ den = sps->vui.vui_time_scale;
}
if (num != 0 && den != 0)
@@ -110,15 +109,15 @@ static int hevc_parse_slice_header(AVCodecParserContext *s, H2645NAL *nal,
unsigned int slice_segment_addr;
int slice_address_length;
- if (ps->pps->dependent_slice_segments_enabled_flag)
+ if (pps->dependent_slice_segments_enabled_flag)
dependent_slice_segment_flag = get_bits1(gb);
else
dependent_slice_segment_flag = 0;
- slice_address_length = av_ceil_log2_c(ps->sps->ctb_width *
- ps->sps->ctb_height);
+ slice_address_length = av_ceil_log2_c(sps->ctb_width *
+ sps->ctb_height);
slice_segment_addr = get_bitsz(gb, slice_address_length);
- if (slice_segment_addr >= ps->sps->ctb_width * ps->sps->ctb_height) {
+ if (slice_segment_addr >= sps->ctb_width * sps->ctb_height) {
av_log(avctx, AV_LOG_ERROR, "Invalid slice segment address: %u.\n",
slice_segment_addr);
return AVERROR_INVALIDDATA;
@@ -129,7 +128,7 @@ static int hevc_parse_slice_header(AVCodecParserContext *s, H2645NAL *nal,
if (dependent_slice_segment_flag)
return 0; /* break; */
- for (i = 0; i < ps->pps->num_extra_slice_header_bits; i++)
+ for (i = 0; i < pps->num_extra_slice_header_bits; i++)
skip_bits(gb, 1); // slice_reserved_undetermined_flag[]
slice_type = get_ue_golomb_31(gb);
@@ -143,16 +142,16 @@ static int hevc_parse_slice_header(AVCodecParserContext *s, H2645NAL *nal,
slice_type == HEVC_SLICE_P ? AV_PICTURE_TYPE_P :
AV_PICTURE_TYPE_I;
- if (ps->pps->output_flag_present_flag)
+ if (pps->output_flag_present_flag)
skip_bits1(gb); // pic_output_flag
- if (ps->sps->separate_colour_plane)
+ if (sps->separate_colour_plane)
skip_bits(gb, 2); // colour_plane_id
if (!IS_IDR_NAL(nal)) {
- int pic_order_cnt_lsb = get_bits(gb, ps->sps->log2_max_poc_lsb);
+ int pic_order_cnt_lsb = get_bits(gb, sps->log2_max_poc_lsb);
s->output_picture_number = ctx->poc =
- ff_hevc_compute_poc(ps->sps, ctx->pocTid0, pic_order_cnt_lsb, nal->type);
+ ff_hevc_compute_poc(sps, ctx->pocTid0, pic_order_cnt_lsb, nal->type);
} else
s->output_picture_number = ctx->poc = 0;
--
2.43.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2024-06-07 13:09 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-07 13:00 [FFmpeg-devel] [PATCH 01/39] lavc/hevcdec: do not free SliceHeader arrays in pic_arrays_free() Anton Khirnov
2024-06-07 13:00 ` [FFmpeg-devel] [PATCH 02/39] lavc/hevcdec: simplify condition Anton Khirnov
2024-06-07 13:00 ` [FFmpeg-devel] [PATCH 03/39] lavc/hevcdec: drop a redundant assignment in hevc_decode_frame() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 04/39] lavc/hevc_ps: make PPS hold a reference to its SPS Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 05/39] lavc/hevc_ps: make SPS hold a reference to its VPS Anton Khirnov
2024-06-07 13:01 ` Anton Khirnov [this message]
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 07/39] lavc/hevc/mvs: stop accessing parameter sets through HEVCParamSets Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 08/39] lavc/hevc/filter: " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 09/39] lavc/hevc/cabac: " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 10/39] lavc/hevc/pred: " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 11/39] lavc/hevcdec: " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 12/39] lavc/hevcdec: move active PPS from HEVCParamSets to HEVCContext Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 13/39] lavc/hevcdec: drop an always-zero variable Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 14/39] lavc/hevcdec: only ignore INVALIDDATA in decode_nal_unit() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 15/39] lavc/hevcdec: pass SliceHeader explicitly to pred_weight_table() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 16/39] lavc/hevcdec: do not pass HEVCContext to decode_lt_rps() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 17/39] lavc/hevcdec: move pocTid0 computation to hevc_frame_start() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 18/39] lavc/hevcdec: only call export_stream_params_from_sei() once per frame Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 19/39] lavc/hevcdec: do not pass HEVCContext to ff_hevc_frame_nb_refs() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 20/39] lavc/hevcdec: only set no_rasl_output_flag for IRAP frames Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 21/39] lavc/hevcdec: output RASL frames based on the value of no_rasl_output_flag Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 22/39] lavc/hevc/cabac: do not infer WPP use based on HEVCContext.threads_number Anton Khirnov
2024-06-08 7:02 ` Christophe Gisquet
2024-06-08 13:06 ` Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 23/39] lavc/hevcdec: drop redundant HEVCContext.threads_{type, number} Anton Khirnov
2024-06-08 7:08 ` Christophe Gisquet
2024-06-08 13:07 ` Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 24/39] lavc/hevcdec: store slice header POC in SliceHeader Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 25/39] lavc/hevcdec: move a slice segment sanity check to hls_slice_header() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 26/39] lavc/hevcdec: move slice decoding dispatch to its own function Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 27/39] lavc/hevcdec: move per-slice local_ctx setup out of hls_slice_header() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 28/39] lavc/hevcdec: move calling hwaccel start_frame to hevc_frame_start() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 29/39] lavc/hevcdec: move calling hwaccel decode_slice to decode_slice_data() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 30/39] lavc/hevcdec: move constructing slice RPL " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 31/39] lavc/hevcdec: set active PPS/SPS in hevc_frame_start() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 32/39] lavc/hevcdec: move sequence increment/IDR handling to hevc_frame_start() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 33/39] lavc/hevcdec: move setting slice_initialized out of hls_slice_header() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 34/39] lavc/hevcdec: move the check for multiple frames in a packet Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 35/39] lavc/hevcdec: drop a redundant multiple-frame-per-packet check Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 36/39] lavc/hevcdec: factor decoding a slice NALU out of decode_nal_unit() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 37/39] lavc/hevcdec: move some frame-end code to hevc_frame_end() Anton Khirnov
2024-06-13 5:55 ` Wang, Fei W
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 38/39] lavc/hevcdec: do not unref current frame on frame_end() failure Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 39/39] lavc/hevcdec: constify source frame in hevc_ref_frame() Anton Khirnov
2024-06-08 12:48 ` Vittorio Giovara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240607130135.9088-6-anton@khirnov.net \
--to=anton@khirnov.net \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git