From: Anton Khirnov <anton@khirnov.net>
To: ffmpeg-devel@ffmpeg.org
Subject: [FFmpeg-devel] [PATCH 26/39] lavc/hevcdec: move slice decoding dispatch to its own function
Date: Fri, 7 Jun 2024 15:01:22 +0200
Message-ID: <20240607130135.9088-26-anton@khirnov.net> (raw)
In-Reply-To: <20240607130135.9088-1-anton@khirnov.net>
Also move there a sanity check from hls_decode_entry() that should also
be performed when WPP is active (note that the check is not moved to
hls_slice_header() because it requires the HEVCContext.tab_slice_address
to be set up).
---
libavcodec/hevc/hevcdec.c | 36 ++++++++++++++++++++++--------------
1 file changed, 22 insertions(+), 14 deletions(-)
diff --git a/libavcodec/hevc/hevcdec.c b/libavcodec/hevc/hevcdec.c
index 9c1d879953..bbcaa350c7 100644
--- a/libavcodec/hevc/hevcdec.c
+++ b/libavcodec/hevc/hevcdec.c
@@ -2578,14 +2578,6 @@ static int hls_decode_entry(HEVCContext *s, GetBitContext *gb)
int ctb_addr_ts = pps->ctb_addr_rs_to_ts[s->sh.slice_ctb_addr_rs];
int ret;
- if (s->sh.dependent_slice_segment_flag) {
- int prev_rs = pps->ctb_addr_ts_to_rs[ctb_addr_ts - 1];
- if (s->tab_slice_address[prev_rs] != s->sh.slice_addr) {
- av_log(s->avctx, AV_LOG_ERROR, "Previous slice segment missing\n");
- return AVERROR_INVALIDDATA;
- }
- }
-
while (more_data && ctb_addr_ts < sps->ctb_size) {
int ctb_addr_rs = pps->ctb_addr_ts_to_rs[ctb_addr_ts];
@@ -2813,6 +2805,27 @@ static int hls_slice_data_wpp(HEVCContext *s, const H2645NAL *nal)
return res;
}
+static int decode_slice_data(HEVCContext *s, const H2645NAL *nal, GetBitContext *gb)
+{
+ const HEVCPPS *pps = s->pps;
+
+ if (s->sh.dependent_slice_segment_flag) {
+ int ctb_addr_ts = pps->ctb_addr_rs_to_ts[s->sh.slice_ctb_addr_rs];
+ int prev_rs = pps->ctb_addr_ts_to_rs[ctb_addr_ts - 1];
+ if (s->tab_slice_address[prev_rs] != s->sh.slice_addr) {
+ av_log(s->avctx, AV_LOG_ERROR, "Previous slice segment missing\n");
+ return AVERROR_INVALIDDATA;
+ }
+ }
+
+ if (s->avctx->active_thread_type == FF_THREAD_SLICE &&
+ s->sh.num_entry_point_offsets > 0 &&
+ pps->num_tile_rows == 1 && pps->num_tile_columns == 1)
+ return hls_slice_data_wpp(s, nal);
+
+ return hls_decode_entry(s, gb);
+}
+
static int set_side_data(HEVCContext *s)
{
AVFrame *out = s->cur_frame->f;
@@ -3152,12 +3165,7 @@ static int decode_nal_unit(HEVCContext *s, const H2645NAL *nal)
goto fail;
}
- if (s->avctx->active_thread_type == FF_THREAD_SLICE &&
- s->sh.num_entry_point_offsets > 0 &&
- s->pps->num_tile_rows == 1 && s->pps->num_tile_columns == 1)
- ctb_addr_ts = hls_slice_data_wpp(s, nal);
- else
- ctb_addr_ts = hls_decode_entry(s, &gb);
+ ctb_addr_ts = decode_slice_data(s, nal, &gb);
if (ctb_addr_ts >= s->cur_frame->ctb_count) {
ret = hevc_frame_end(s);
if (ret < 0)
--
2.43.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2024-06-07 13:07 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-07 13:00 [FFmpeg-devel] [PATCH 01/39] lavc/hevcdec: do not free SliceHeader arrays in pic_arrays_free() Anton Khirnov
2024-06-07 13:00 ` [FFmpeg-devel] [PATCH 02/39] lavc/hevcdec: simplify condition Anton Khirnov
2024-06-07 13:00 ` [FFmpeg-devel] [PATCH 03/39] lavc/hevcdec: drop a redundant assignment in hevc_decode_frame() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 04/39] lavc/hevc_ps: make PPS hold a reference to its SPS Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 05/39] lavc/hevc_ps: make SPS hold a reference to its VPS Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 06/39] lavc/hevc/parser: stop using HEVCParamSets.[psv]ps Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 07/39] lavc/hevc/mvs: stop accessing parameter sets through HEVCParamSets Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 08/39] lavc/hevc/filter: " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 09/39] lavc/hevc/cabac: " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 10/39] lavc/hevc/pred: " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 11/39] lavc/hevcdec: " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 12/39] lavc/hevcdec: move active PPS from HEVCParamSets to HEVCContext Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 13/39] lavc/hevcdec: drop an always-zero variable Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 14/39] lavc/hevcdec: only ignore INVALIDDATA in decode_nal_unit() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 15/39] lavc/hevcdec: pass SliceHeader explicitly to pred_weight_table() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 16/39] lavc/hevcdec: do not pass HEVCContext to decode_lt_rps() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 17/39] lavc/hevcdec: move pocTid0 computation to hevc_frame_start() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 18/39] lavc/hevcdec: only call export_stream_params_from_sei() once per frame Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 19/39] lavc/hevcdec: do not pass HEVCContext to ff_hevc_frame_nb_refs() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 20/39] lavc/hevcdec: only set no_rasl_output_flag for IRAP frames Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 21/39] lavc/hevcdec: output RASL frames based on the value of no_rasl_output_flag Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 22/39] lavc/hevc/cabac: do not infer WPP use based on HEVCContext.threads_number Anton Khirnov
2024-06-08 7:02 ` Christophe Gisquet
2024-06-08 13:06 ` Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 23/39] lavc/hevcdec: drop redundant HEVCContext.threads_{type, number} Anton Khirnov
2024-06-08 7:08 ` Christophe Gisquet
2024-06-08 13:07 ` Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 24/39] lavc/hevcdec: store slice header POC in SliceHeader Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 25/39] lavc/hevcdec: move a slice segment sanity check to hls_slice_header() Anton Khirnov
2024-06-07 13:01 ` Anton Khirnov [this message]
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 27/39] lavc/hevcdec: move per-slice local_ctx setup out of hls_slice_header() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 28/39] lavc/hevcdec: move calling hwaccel start_frame to hevc_frame_start() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 29/39] lavc/hevcdec: move calling hwaccel decode_slice to decode_slice_data() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 30/39] lavc/hevcdec: move constructing slice RPL " Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 31/39] lavc/hevcdec: set active PPS/SPS in hevc_frame_start() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 32/39] lavc/hevcdec: move sequence increment/IDR handling to hevc_frame_start() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 33/39] lavc/hevcdec: move setting slice_initialized out of hls_slice_header() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 34/39] lavc/hevcdec: move the check for multiple frames in a packet Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 35/39] lavc/hevcdec: drop a redundant multiple-frame-per-packet check Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 36/39] lavc/hevcdec: factor decoding a slice NALU out of decode_nal_unit() Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 37/39] lavc/hevcdec: move some frame-end code to hevc_frame_end() Anton Khirnov
2024-06-13 5:55 ` Wang, Fei W
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 38/39] lavc/hevcdec: do not unref current frame on frame_end() failure Anton Khirnov
2024-06-07 13:01 ` [FFmpeg-devel] [PATCH 39/39] lavc/hevcdec: constify source frame in hevc_ref_frame() Anton Khirnov
2024-06-08 12:48 ` Vittorio Giovara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240607130135.9088-26-anton@khirnov.net \
--to=anton@khirnov.net \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git