From: tong1.wu-at-intel.com@ffmpeg.org To: ffmpeg-devel@ffmpeg.org Cc: Tong Wu <tong1.wu@intel.com> Subject: [FFmpeg-devel] [PATCH v10 07/13] avcodec/vaapi_encode: extract gop configuration and two options to base layer Date: Wed, 22 May 2024 09:26:20 +0800 Message-ID: <20240522012627.1386-7-tong1.wu@intel.com> (raw) In-Reply-To: <20240522012627.1386-1-tong1.wu@intel.com> From: Tong Wu <tong1.wu@intel.com> idr_interval and desired_b_depth are moved to HW_BASE_ENCODE_COMMON_OPTIONS. Signed-off-by: Tong Wu <tong1.wu@intel.com> --- libavcodec/hw_base_encode.c | 54 +++++++++++++++++++++++++++++++++++++ libavcodec/hw_base_encode.h | 19 +++++++++++++ libavcodec/vaapi_encode.c | 52 +++-------------------------------- libavcodec/vaapi_encode.h | 16 ----------- 4 files changed, 77 insertions(+), 64 deletions(-) diff --git a/libavcodec/hw_base_encode.c b/libavcodec/hw_base_encode.c index f2b6ef4a3a..dfe20c4e67 100644 --- a/libavcodec/hw_base_encode.c +++ b/libavcodec/hw_base_encode.c @@ -596,6 +596,60 @@ end: return 0; } +int ff_hw_base_init_gop_structure(AVCodecContext *avctx, uint32_t ref_l0, uint32_t ref_l1, + int flags, int prediction_pre_only) +{ + HWBaseEncodeContext *ctx = avctx->priv_data; + + if (flags & FLAG_INTRA_ONLY || avctx->gop_size <= 1) { + av_log(avctx, AV_LOG_VERBOSE, "Using intra frames only.\n"); + ctx->gop_size = 1; + } else if (ref_l0 < 1) { + av_log(avctx, AV_LOG_ERROR, "Driver does not support any " + "reference frames.\n"); + return AVERROR(EINVAL); + } else if (!(flags & FLAG_B_PICTURES) || ref_l1 < 1 || + avctx->max_b_frames < 1 || prediction_pre_only) { + if (ctx->p_to_gpb) + av_log(avctx, AV_LOG_VERBOSE, "Using intra and B-frames " + "(supported references: %d / %d).\n", + ref_l0, ref_l1); + else + av_log(avctx, AV_LOG_VERBOSE, "Using intra and P-frames " + "(supported references: %d / %d).\n", ref_l0, ref_l1); + ctx->gop_size = avctx->gop_size; + ctx->p_per_i = INT_MAX; + ctx->b_per_p = 0; + } else { + if (ctx->p_to_gpb) + av_log(avctx, AV_LOG_VERBOSE, "Using intra and B-frames " + "(supported references: %d / %d).\n", + ref_l0, ref_l1); + else + av_log(avctx, AV_LOG_VERBOSE, "Using intra, P- and B-frames " + "(supported references: %d / %d).\n", ref_l0, ref_l1); + ctx->gop_size = avctx->gop_size; + ctx->p_per_i = INT_MAX; + ctx->b_per_p = avctx->max_b_frames; + if (flags & FLAG_B_PICTURE_REFERENCES) { + ctx->max_b_depth = FFMIN(ctx->desired_b_depth, + av_log2(ctx->b_per_p) + 1); + } else { + ctx->max_b_depth = 1; + } + } + + if (flags & FLAG_NON_IDR_KEY_PICTURES) { + ctx->closed_gop = !!(avctx->flags & AV_CODEC_FLAG_CLOSED_GOP); + ctx->gop_per_idr = ctx->idr_interval + 1; + } else { + ctx->closed_gop = 1; + ctx->gop_per_idr = 1; + } + + return 0; +} + int ff_hw_base_encode_init(AVCodecContext *avctx) { HWBaseEncodeContext *ctx = avctx->priv_data; diff --git a/libavcodec/hw_base_encode.h b/libavcodec/hw_base_encode.h index 7e20f57b9c..07936bf9bb 100644 --- a/libavcodec/hw_base_encode.h +++ b/libavcodec/hw_base_encode.h @@ -119,6 +119,14 @@ typedef struct HWBaseEncodeContext { // Hardware-specific hooks. const struct HWEncodePictureOperation *op; + // Global options. + + // Number of I frames between IDR frames. + int idr_interval; + + // Desired B frame reference depth. + int desired_b_depth; + // The hardware device context. AVBufferRef *device_ref; AVHWDeviceContext *device; @@ -197,11 +205,22 @@ typedef struct HWBaseEncodeContext { int ff_hw_base_encode_receive_packet(AVCodecContext *avctx, AVPacket *pkt); +int ff_hw_base_init_gop_structure(AVCodecContext *avctx, uint32_t ref_l0, uint32_t ref_l1, + int flags, int prediction_pre_only); + int ff_hw_base_encode_init(AVCodecContext *avctx); int ff_hw_base_encode_close(AVCodecContext *avctx); #define HW_BASE_ENCODE_COMMON_OPTIONS \ + { "idr_interval", \ + "Distance (in I-frames) between key frames", \ + OFFSET(common.base.idr_interval), AV_OPT_TYPE_INT, \ + { .i64 = 0 }, 0, INT_MAX, FLAGS }, \ + { "b_depth", \ + "Maximum B-frame reference depth", \ + OFFSET(common.base.desired_b_depth), AV_OPT_TYPE_INT, \ + { .i64 = 1 }, 1, INT_MAX, FLAGS }, \ { "async_depth", "Maximum processing parallelism. " \ "Increase this to improve single channel performance.", \ OFFSET(common.base.async_depth), AV_OPT_TYPE_INT, \ diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c index c3ab0fc192..4db64b686b 100644 --- a/libavcodec/vaapi_encode.c +++ b/libavcodec/vaapi_encode.c @@ -1638,7 +1638,7 @@ static av_cold int vaapi_encode_init_gop_structure(AVCodecContext *avctx) VAStatus vas; VAConfigAttrib attr = { VAConfigAttribEncMaxRefFrames }; uint32_t ref_l0, ref_l1; - int prediction_pre_only; + int prediction_pre_only, err; vas = vaGetConfigAttributes(ctx->hwctx->display, ctx->va_profile, @@ -1702,53 +1702,9 @@ static av_cold int vaapi_encode_init_gop_structure(AVCodecContext *avctx) } #endif - if (ctx->codec->flags & FLAG_INTRA_ONLY || - avctx->gop_size <= 1) { - av_log(avctx, AV_LOG_VERBOSE, "Using intra frames only.\n"); - base_ctx->gop_size = 1; - } else if (ref_l0 < 1) { - av_log(avctx, AV_LOG_ERROR, "Driver does not support any " - "reference frames.\n"); - return AVERROR(EINVAL); - } else if (!(ctx->codec->flags & FLAG_B_PICTURES) || - ref_l1 < 1 || avctx->max_b_frames < 1 || - prediction_pre_only) { - if (base_ctx->p_to_gpb) - av_log(avctx, AV_LOG_VERBOSE, "Using intra and B-frames " - "(supported references: %d / %d).\n", - ref_l0, ref_l1); - else - av_log(avctx, AV_LOG_VERBOSE, "Using intra and P-frames " - "(supported references: %d / %d).\n", ref_l0, ref_l1); - base_ctx->gop_size = avctx->gop_size; - base_ctx->p_per_i = INT_MAX; - base_ctx->b_per_p = 0; - } else { - if (base_ctx->p_to_gpb) - av_log(avctx, AV_LOG_VERBOSE, "Using intra and B-frames " - "(supported references: %d / %d).\n", - ref_l0, ref_l1); - else - av_log(avctx, AV_LOG_VERBOSE, "Using intra, P- and B-frames " - "(supported references: %d / %d).\n", ref_l0, ref_l1); - base_ctx->gop_size = avctx->gop_size; - base_ctx->p_per_i = INT_MAX; - base_ctx->b_per_p = avctx->max_b_frames; - if (ctx->codec->flags & FLAG_B_PICTURE_REFERENCES) { - base_ctx->max_b_depth = FFMIN(ctx->desired_b_depth, - av_log2(base_ctx->b_per_p) + 1); - } else { - base_ctx->max_b_depth = 1; - } - } - - if (ctx->codec->flags & FLAG_NON_IDR_KEY_PICTURES) { - base_ctx->closed_gop = !!(avctx->flags & AV_CODEC_FLAG_CLOSED_GOP); - base_ctx->gop_per_idr = ctx->idr_interval + 1; - } else { - base_ctx->closed_gop = 1; - base_ctx->gop_per_idr = 1; - } + err = ff_hw_base_init_gop_structure(avctx, ref_l0, ref_l1, ctx->codec->flags, prediction_pre_only); + if (err < 0) + return err; return 0; } diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h index c25eab1cb7..76fb645d71 100644 --- a/libavcodec/vaapi_encode.h +++ b/libavcodec/vaapi_encode.h @@ -151,17 +151,9 @@ typedef struct VAAPIEncodeContext { // Codec-specific hooks. const struct VAAPIEncodeType *codec; - // Global options. - // Use low power encoding mode. int low_power; - // Number of I frames between IDR frames. - int idr_interval; - - // Desired B frame reference depth. - int desired_b_depth; - // Max Frame Size int max_frame_size; @@ -371,14 +363,6 @@ int ff_vaapi_encode_close(AVCodecContext *avctx); "may not support all encoding features)", \ OFFSET(common.low_power), AV_OPT_TYPE_BOOL, \ { .i64 = 0 }, 0, 1, FLAGS }, \ - { "idr_interval", \ - "Distance (in I-frames) between IDR frames", \ - OFFSET(common.idr_interval), AV_OPT_TYPE_INT, \ - { .i64 = 0 }, 0, INT_MAX, FLAGS }, \ - { "b_depth", \ - "Maximum B-frame reference depth", \ - OFFSET(common.desired_b_depth), AV_OPT_TYPE_INT, \ - { .i64 = 1 }, 1, INT_MAX, FLAGS }, \ { "max_frame_size", \ "Maximum frame size (in bytes)",\ OFFSET(common.max_frame_size), AV_OPT_TYPE_INT, \ -- 2.41.0.windows.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2024-05-22 1:28 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-05-22 1:26 [FFmpeg-devel] [PATCH v10 01/13] avcodec/vaapi_encode: introduce a base layer for vaapi encode tong1.wu-at-intel.com 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 02/13] avcodec/vaapi_encode: add async_depth to common options tong1.wu-at-intel.com 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 03/13] avcodec/vaapi_encode: add picture type name to base tong1.wu-at-intel.com 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 04/13] avcodec/vaapi_encode: move pic->input_surface initialization to encode_alloc tong1.wu-at-intel.com 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 05/13] avcodec/vaapi_encode: move the dpb logic from VAAPI to base layer tong1.wu-at-intel.com 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 06/13] avcodec/vaapi_encode: extract the init and close function " tong1.wu-at-intel.com 2024-05-22 1:26 ` tong1.wu-at-intel.com [this message] 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 08/13] avcodec/vaapi_encode: extract set_output_property " tong1.wu-at-intel.com 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 09/13] avcodec/vaapi_encode: extract a get_recon_format function " tong1.wu-at-intel.com 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 10/13] avcodec/vaapi_encode: extract a free funtion " tong1.wu-at-intel.com 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 11/13] avutil/hwcontext_d3d12va: add Flags for resource creation tong1.wu-at-intel.com 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 12/13] avcodec: add D3D12VA hardware HEVC encoder tong1.wu-at-intel.com 2024-05-28 15:02 ` Andrew Sayers 2024-05-22 1:26 ` [FFmpeg-devel] [PATCH v10 13/13] Changelog: add D3D12VA HEVC encoder changelog tong1.wu-at-intel.com
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20240522012627.1386-7-tong1.wu@intel.com \ --to=tong1.wu-at-intel.com@ffmpeg.org \ --cc=ffmpeg-devel@ffmpeg.org \ --cc=tong1.wu@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git