* [FFmpeg-devel] [PATCHv2 1/2] sws/rgb2rgb: rework R-V V YUY2 to 4:2:2 planar
@ 2023-11-10 15:43 Rémi Denis-Courmont
2023-11-10 15:43 ` [FFmpeg-devel] [PATCHv2 2/2] sws/rgb2rgb: fix unaligned accesses in R-V V YUYV to I422p Rémi Denis-Courmont
0 siblings, 1 reply; 2+ messages in thread
From: Rémi Denis-Courmont @ 2023-11-10 15:43 UTC (permalink / raw)
To: ffmpeg-devel
This saves three scratch registers and three instructions per line. The
performance gains are mostly negligible. The main point is to free up
registers for further rework.
---
libswscale/riscv/rgb2rgb_rvv.S | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/libswscale/riscv/rgb2rgb_rvv.S b/libswscale/riscv/rgb2rgb_rvv.S
index 671089c842..172f5918dc 100644
--- a/libswscale/riscv/rgb2rgb_rvv.S
+++ b/libswscale/riscv/rgb2rgb_rvv.S
@@ -127,31 +127,30 @@ func ff_deinterleave_bytes_rvv, zve32x
endfunc
.macro yuy2_to_i422p y_shift
- addi a4, a4, 1
+ slli t4, a4, 1 // pixel width -> (source) byte width
lw t6, (sp)
+ sub a6, a6, a4
srai a4, a4, 1 // pixel width -> chroma width
+ sub a7, a7, a4
+ sub t6, t6, t4
1:
mv t4, a4
- mv t3, a3
- mv t0, a0
- mv t1, a1
- mv t2, a2
addi a5, a5, -1
2:
vsetvli t5, t4, e8, m2, ta, ma
- vlseg2e16.v v16, (t3)
+ vlseg2e16.v v16, (a3)
sub t4, t4, t5
vnsrl.wi v24, v16, \y_shift // Y0
- sh2add t3, t5, t3
+ sh2add a3, t5, a3
vnsrl.wi v26, v20, \y_shift // Y1
vnsrl.wi v28, v16, 8 - \y_shift // U
vnsrl.wi v30, v20, 8 - \y_shift // V
- vsseg2e8.v v24, (t0)
- sh1add t0, t5, t0
- vse8.v v28, (t1)
- add t1, t5, t1
- vse8.v v30, (t2)
- add t2, t5, t2
+ vsseg2e8.v v24, (a0)
+ sh1add a0, t5, a0
+ vse8.v v28, (a1)
+ add a1, t5, a1
+ vse8.v v30, (a2)
+ add a2, t5, a2
bnez t4, 2b
add a3, a3, t6
--
2.42.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 2+ messages in thread
* [FFmpeg-devel] [PATCHv2 2/2] sws/rgb2rgb: fix unaligned accesses in R-V V YUYV to I422p
2023-11-10 15:43 [FFmpeg-devel] [PATCHv2 1/2] sws/rgb2rgb: rework R-V V YUY2 to 4:2:2 planar Rémi Denis-Courmont
@ 2023-11-10 15:43 ` Rémi Denis-Courmont
0 siblings, 0 replies; 2+ messages in thread
From: Rémi Denis-Courmont @ 2023-11-10 15:43 UTC (permalink / raw)
To: ffmpeg-devel
In my personal opinion, we should not need to support unaligned YUY2
pixel maps. They should always be aligned to at least 32 bits, and the
current code assumes just 16 bits. However checkasm does test for
unaligned input bitmaps. QEMU accepts it, but real hardware dose not.
In this particular case, we can at the same time improve performance and
handle unaligned inputs, so do just that.
uyvytoyuv422_c: 104379.0
uyvytoyuv422_c: 104060.0
uyvytoyuv422_rvv_i32: 25284.0 (before)
uyvytoyuv422_rvv_i32: 19303.2 (after)
---
libswscale/riscv/rgb2rgb.c | 6 +++--
libswscale/riscv/rgb2rgb_rvv.S | 47 ++++++++++++++++++----------------
2 files changed, 29 insertions(+), 24 deletions(-)
diff --git a/libswscale/riscv/rgb2rgb.c b/libswscale/riscv/rgb2rgb.c
index 565f0b77f1..4fa1f5afd9 100644
--- a/libswscale/riscv/rgb2rgb.c
+++ b/libswscale/riscv/rgb2rgb.c
@@ -55,8 +55,10 @@ av_cold void rgb2rgb_init_riscv(void)
shuffle_bytes_1230 = ff_shuffle_bytes_1230_rvv;
shuffle_bytes_3012 = ff_shuffle_bytes_3012_rvv;
interleaveBytes = ff_interleave_bytes_rvv;
- uyvytoyuv422 = ff_uyvytoyuv422_rvv;
- yuyvtoyuv422 = ff_yuyvtoyuv422_rvv;
+ if (flags & AV_CPU_FLAG_RVB_BASIC) {
+ uyvytoyuv422 = ff_uyvytoyuv422_rvv;
+ yuyvtoyuv422 = ff_yuyvtoyuv422_rvv;
+ }
}
#endif
}
diff --git a/libswscale/riscv/rgb2rgb_rvv.S b/libswscale/riscv/rgb2rgb_rvv.S
index 172f5918dc..21e30ab8bb 100644
--- a/libswscale/riscv/rgb2rgb_rvv.S
+++ b/libswscale/riscv/rgb2rgb_rvv.S
@@ -126,32 +126,35 @@ func ff_deinterleave_bytes_rvv, zve32x
ret
endfunc
-.macro yuy2_to_i422p y_shift
- slli t4, a4, 1 // pixel width -> (source) byte width
+.macro yuy2_to_i422p luma, chroma
+ srai t4, a4, 1 // pixel width -> chroma width
lw t6, (sp)
+ slli t5, a4, 1 // pixel width -> (source) byte width
sub a6, a6, a4
- srai a4, a4, 1 // pixel width -> chroma width
- sub a7, a7, a4
- sub t6, t6, t4
+ sub a7, a7, t4
+ sub t6, t6, t5
+ vsetvli t2, zero, e8, m4, ta, ma
1:
mv t4, a4
addi a5, a5, -1
2:
- vsetvli t5, t4, e8, m2, ta, ma
- vlseg2e16.v v16, (a3)
- sub t4, t4, t5
- vnsrl.wi v24, v16, \y_shift // Y0
- sh2add a3, t5, a3
- vnsrl.wi v26, v20, \y_shift // Y1
- vnsrl.wi v28, v16, 8 - \y_shift // U
- vnsrl.wi v30, v20, 8 - \y_shift // V
- vsseg2e8.v v24, (a0)
- sh1add a0, t5, a0
- vse8.v v28, (a1)
- add a1, t5, a1
- vse8.v v30, (a2)
- add a2, t5, a2
- bnez t4, 2b
+ min t0, t2, t4 // ensure even VL on penultimate iteration
+ vsetvli t0, t0, e8, m4, ta, ma
+ vlseg2e8.v v16, (a3)
+ srli t1, t0, 1
+ vsetvli zero, t1, e8, m2, ta, ma
+ vnsrl.wi v24, \chroma, 0 // U
+ sub t4, t4, t0
+ vnsrl.wi v28, \chroma, 8 // V
+ sh1add a3, t0, a3
+ vse8.v v24, (a1)
+ add a1, t1, a1
+ vse8.v v28, (a2)
+ add a2, t1, a2
+ vsetvli zero, t0, e8, m4, ta, ma
+ vse8.v \luma, (a0)
+ add a0, t0, a0
+ bnez t4, 2b
add a3, a3, t6
add a0, a0, a6
@@ -163,9 +166,9 @@ endfunc
.endm
func ff_uyvytoyuv422_rvv, zve32x
- yuy2_to_i422p 8
+ yuy2_to_i422p v20, v16
endfunc
func ff_yuyvtoyuv422_rvv, zve32x
- yuy2_to_i422p 0
+ yuy2_to_i422p v16, v20
endfunc
--
2.42.0
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-11-10 15:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-11-10 15:43 [FFmpeg-devel] [PATCHv2 1/2] sws/rgb2rgb: rework R-V V YUY2 to 4:2:2 planar Rémi Denis-Courmont
2023-11-10 15:43 ` [FFmpeg-devel] [PATCHv2 2/2] sws/rgb2rgb: fix unaligned accesses in R-V V YUYV to I422p Rémi Denis-Courmont
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git