From: Anton Khirnov <anton@khirnov.net>
To: ffmpeg-devel@ffmpeg.org
Subject: [FFmpeg-devel] [PATCH 4/9] lavc/mpegvideo_parser: reduce variable scopes
Date: Sun, 1 Oct 2023 14:55:47 +0200
Message-ID: <20231001125552.23976-4-anton@khirnov.net> (raw)
In-Reply-To: <20231001125552.23976-1-anton@khirnov.net>
Drop some variables only used in a switch().
---
libavcodec/mpegvideo_parser.c | 33 ++++++++++++++-------------------
1 file changed, 14 insertions(+), 19 deletions(-)
diff --git a/libavcodec/mpegvideo_parser.c b/libavcodec/mpegvideo_parser.c
index d0b22634bb..76cd2a5131 100644
--- a/libavcodec/mpegvideo_parser.c
+++ b/libavcodec/mpegvideo_parser.c
@@ -105,22 +105,17 @@ static void mpegvideo_extract_headers(AVCodecParserContext *s,
{
struct MpvParseContext *pc = s->priv_data;
const uint8_t *buf_end = buf + buf_size;
- uint32_t start_code;
- int frame_rate_index, ext_type, bytes_left;
- int frame_rate_ext_n, frame_rate_ext_d;
- int top_field_first, repeat_first_field, progressive_frame;
- int horiz_size_ext, vert_size_ext, bit_rate_ext;
+ int bytes_left;
int did_set_size=0;
int set_dim_ret = 0;
int bit_rate = 0;
int vbv_delay = 0;
- int chroma_format;
enum AVPixelFormat pix_fmt = AV_PIX_FMT_NONE;
//FIXME replace the crap with get_bits()
s->repeat_pict = 0;
while (buf < buf_end) {
- start_code= -1;
+ uint32_t start_code = -1;
buf= avpriv_find_start_code(buf, buf_end, &start_code);
bytes_left = buf_end - buf;
switch(start_code) {
@@ -134,6 +129,8 @@ static void mpegvideo_extract_headers(AVCodecParserContext *s,
break;
case SEQ_START_CODE:
if (bytes_left >= 7) {
+ int frame_rate_index;
+
pc->width = (buf[0] << 4) | (buf[1] >> 4);
pc->height = ((buf[1] & 0x0f) << 8) | buf[2];
if(!avctx->width || !avctx->height || !avctx->coded_width || !avctx->coded_height){
@@ -154,20 +151,18 @@ FF_ENABLE_DEPRECATION_WARNINGS
break;
case EXT_START_CODE:
if (bytes_left >= 1) {
- ext_type = (buf[0] >> 4);
- switch(ext_type) {
+ switch (buf[0] >> 4) { // ext_type
case 0x1: /* sequence extension */
if (bytes_left >= 6) {
- horiz_size_ext = ((buf[1] & 1) << 1) | (buf[2] >> 7);
- vert_size_ext = (buf[2] >> 5) & 3;
- bit_rate_ext = ((buf[2] & 0x1F)<<7) | (buf[3]>>1);
- frame_rate_ext_n = (buf[5] >> 5) & 3;
- frame_rate_ext_d = (buf[5] & 0x1f);
+ int horiz_size_ext = ((buf[1] & 1) << 1) | (buf[2] >> 7);
+ int vert_size_ext = (buf[2] >> 5) & 3;
+ int bit_rate_ext = ((buf[2] & 0x1F)<<7) | (buf[3]>>1);
+ int frame_rate_ext_n = (buf[5] >> 5) & 3;
+ int frame_rate_ext_d = (buf[5] & 0x1f);
pc->progressive_sequence = buf[1] & (1 << 3);
avctx->has_b_frames= !(buf[5] >> 7);
- chroma_format = (buf[1] >> 1) & 3;
- switch (chroma_format) {
+ switch ((buf[1] >> 1) & 3) { // chroma_format
case 1: pix_fmt = AV_PIX_FMT_YUV420P; break;
case 2: pix_fmt = AV_PIX_FMT_YUV422P; break;
case 3: pix_fmt = AV_PIX_FMT_YUV444P; break;
@@ -190,9 +185,9 @@ FF_ENABLE_DEPRECATION_WARNINGS
break;
case 0x8: /* picture coding extension */
if (bytes_left >= 5) {
- top_field_first = buf[3] & (1 << 7);
- repeat_first_field = buf[3] & (1 << 1);
- progressive_frame = buf[4] & (1 << 7);
+ int top_field_first = buf[3] & (1 << 7);
+ int repeat_first_field = buf[3] & (1 << 1);
+ int progressive_frame = buf[4] & (1 << 7);
/* check if we must repeat the frame */
if (repeat_first_field) {
--
2.40.1
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2023-10-01 12:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-01 12:55 [FFmpeg-devel] [PATCH 1/9] lavfi/yadif: update output frame durations Anton Khirnov
2023-10-01 12:55 ` [FFmpeg-devel] [PATCH 2/9] lavf/demux: restrict video parser duration handling to just GIF Anton Khirnov
2023-10-01 12:55 ` [FFmpeg-devel] [PATCH 3/9] lavf/gifdec: do not mark as notimestamps Anton Khirnov
2023-10-01 12:55 ` Anton Khirnov [this message]
2023-10-01 20:28 ` [FFmpeg-devel] [PATCH 4/9] lavc/mpegvideo_parser: reduce variable scopes Michael Niedermayer
2023-10-01 12:55 ` [FFmpeg-devel] [PATCH 5/9] lavc/mpegvideo_parser: improve exporting field-coding information Anton Khirnov
2023-10-01 12:55 ` [FFmpeg-devel] [PATCH 6/9] lavc/mpeg4videodec: do not invent a framerate from guessed numbers Anton Khirnov
2023-10-01 13:14 ` Andreas Rheinhardt
2023-10-02 8:56 ` Anton Khirnov
2023-10-01 12:55 ` [FFmpeg-devel] [PATCH 7/9] fftools/ffmpeg_dec: disregard demuxer timestamps for NOTIMESTAMPS formats Anton Khirnov
2023-10-01 13:18 ` Andreas Rheinhardt
2023-10-02 8:59 ` Anton Khirnov
2023-10-01 12:55 ` [FFmpeg-devel] [PATCH 8/9] fftools/ffmpeg_enc: do not round frame durations prematurely Anton Khirnov
2023-10-01 12:55 ` [FFmpeg-devel] [PATCH 9/9] fftools/ffmpeg: move derivation of frame duration from filter framerate Anton Khirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231001125552.23976-4-anton@khirnov.net \
--to=anton@khirnov.net \
--cc=ffmpeg-devel@ffmpeg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
ffmpegdev@gitmailbox.com
public-inbox-index ffmpegdev
Example config snippet for mirrors.
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git