Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
 help / color / mirror / Atom feed
From: James Almer <jamrial@gmail.com>
To: ffmpeg-devel@ffmpeg.org
Subject: [FFmpeg-devel] [PATCH] avcodec/decode: factor out filling frame props
Date: Fri, 14 Jul 2023 15:20:36 -0300
Message-ID: <20230714182036.32592-1-jamrial@gmail.com> (raw)

Signed-off-by: James Almer <jamrial@gmail.com>
---
 libavcodec/decode.c | 67 ++++++++++++++++-----------------------------
 1 file changed, 23 insertions(+), 44 deletions(-)

diff --git a/libavcodec/decode.c b/libavcodec/decode.c
index 68525e47a6..51216988a6 100644
--- a/libavcodec/decode.c
+++ b/libavcodec/decode.c
@@ -545,24 +545,27 @@ static int fill_frame_props(AVCodecContext *avctx, AVFrame *frame)
 {
     int ret;
 
+    if (frame->color_primaries == AVCOL_PRI_UNSPECIFIED)
+        frame->color_primaries = avctx->color_primaries;
+    if (frame->color_trc == AVCOL_TRC_UNSPECIFIED)
+        frame->color_trc = avctx->color_trc;
+    if (frame->colorspace == AVCOL_SPC_UNSPECIFIED)
+        frame->colorspace = avctx->colorspace;
+    if (frame->color_range == AVCOL_RANGE_UNSPECIFIED)
+        frame->color_range = avctx->color_range;
+    if (frame->chroma_location == AVCHROMA_LOC_UNSPECIFIED)
+        frame->chroma_location = avctx->chroma_sample_location;
+
     if (avctx->codec_type == AVMEDIA_TYPE_VIDEO) {
-        //FIXME these should be under if(!avctx->has_b_frames)
-        /* get_buffer is supposed to set frame parameters */
-        if (!(avctx->codec->capabilities & AV_CODEC_CAP_DR1)) {
             if (!frame->sample_aspect_ratio.num)  frame->sample_aspect_ratio = avctx->sample_aspect_ratio;
-            if (!frame->width)                    frame->width               = avctx->width;
-            if (!frame->height)                   frame->height              = avctx->height;
             if (frame->format == AV_PIX_FMT_NONE) frame->format              = avctx->pix_fmt;
-        }
     } else if (avctx->codec->type == AVMEDIA_TYPE_AUDIO) {
         if (frame->format == AV_SAMPLE_FMT_NONE)
             frame->format = avctx->sample_fmt;
         if (!frame->ch_layout.nb_channels) {
             ret = av_channel_layout_copy(&frame->ch_layout, &avctx->ch_layout);
-            if (ret < 0) {
-                av_frame_unref(frame);
+            if (ret < 0)
                 return ret;
-            }
         }
 #if FF_API_OLD_CHANNEL_LAYOUT
 FF_DISABLE_DEPRECATION_WARNINGS
@@ -629,7 +632,12 @@ static int decode_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame)
     }
 
     if (!ret) {
-        if (avctx->codec_type != AVMEDIA_TYPE_VIDEO)
+        if (avctx->codec_type == AVMEDIA_TYPE_VIDEO) {
+            if (!frame->width)
+                frame->width = avctx->width;
+            if (!frame->height)
+                frame->height = avctx->height;
+        } else
             frame->flags |= AV_FRAME_FLAG_KEY;
 
         ret = fill_frame_props(avctx, frame);
@@ -1451,9 +1459,10 @@ FF_ENABLE_DEPRECATION_WARNINGS
 int ff_decode_frame_props(AVCodecContext *avctx, AVFrame *frame)
 {
     const AVPacket *pkt = avctx->internal->last_pkt_props;
+    int ret;
 
     if (!(ffcodec(avctx->codec)->caps_internal & FF_CODEC_CAP_SETS_FRAME_PROPS)) {
-        int ret = ff_decode_frame_props_from_pkt(avctx, frame, pkt);
+        ret = ff_decode_frame_props_from_pkt(avctx, frame, pkt);
         if (ret < 0)
             return ret;
 #if FF_API_FRAME_PKT
@@ -1468,23 +1477,12 @@ FF_DISABLE_DEPRECATION_WARNINGS
 FF_ENABLE_DEPRECATION_WARNINGS
 #endif
 
-    if (frame->color_primaries == AVCOL_PRI_UNSPECIFIED)
-        frame->color_primaries = avctx->color_primaries;
-    if (frame->color_trc == AVCOL_TRC_UNSPECIFIED)
-        frame->color_trc = avctx->color_trc;
-    if (frame->colorspace == AVCOL_SPC_UNSPECIFIED)
-        frame->colorspace = avctx->colorspace;
-    if (frame->color_range == AVCOL_RANGE_UNSPECIFIED)
-        frame->color_range = avctx->color_range;
-    if (frame->chroma_location == AVCHROMA_LOC_UNSPECIFIED)
-        frame->chroma_location = avctx->chroma_sample_location;
+    ret = fill_frame_props(avctx, frame);
+    if (ret < 0)
+        return ret;
 
     switch (avctx->codec->type) {
     case AVMEDIA_TYPE_VIDEO:
-        frame->format              = avctx->pix_fmt;
-        if (!frame->sample_aspect_ratio.num)
-            frame->sample_aspect_ratio = avctx->sample_aspect_ratio;
-
         if (frame->width && frame->height &&
             av_image_check_sar(frame->width, frame->height,
                                frame->sample_aspect_ratio) < 0) {
@@ -1493,25 +1491,6 @@ FF_ENABLE_DEPRECATION_WARNINGS
                    frame->sample_aspect_ratio.den);
             frame->sample_aspect_ratio = (AVRational){ 0, 1 };
         }
-
-        break;
-    case AVMEDIA_TYPE_AUDIO:
-        if (!frame->sample_rate)
-            frame->sample_rate    = avctx->sample_rate;
-        if (frame->format < 0)
-            frame->format         = avctx->sample_fmt;
-        if (!frame->ch_layout.nb_channels) {
-            int ret = av_channel_layout_copy(&frame->ch_layout, &avctx->ch_layout);
-            if (ret < 0)
-                return ret;
-        }
-#if FF_API_OLD_CHANNEL_LAYOUT
-FF_DISABLE_DEPRECATION_WARNINGS
-        frame->channels = frame->ch_layout.nb_channels;
-        frame->channel_layout = frame->ch_layout.order == AV_CHANNEL_ORDER_NATIVE ?
-                                frame->ch_layout.u.mask : 0;
-FF_ENABLE_DEPRECATION_WARNINGS
-#endif
         break;
     }
     return 0;
-- 
2.41.0

_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

To unsubscribe, visit link above, or email
ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".

             reply	other threads:[~2023-07-14 18:20 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-14 18:20 James Almer [this message]
2023-07-17 11:45 ` James Almer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230714182036.32592-1-jamrial@gmail.com \
    --to=jamrial@gmail.com \
    --cc=ffmpeg-devel@ffmpeg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \
		ffmpegdev@gitmailbox.com
	public-inbox-index ffmpegdev

Example config snippet for mirrors.


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git