From: "jianfeng.zheng" <ggjogh@gmail.com> To: ffmpeg-devel@ffmpeg.org Subject: [FFmpeg-devel] [PATCH v4] vaapi: support VAProfileH264High10 Date: Wed, 29 Mar 2023 16:41:10 +0800 Message-ID: <20230329084110.200661-1-jianfeng.zheng@mthreads.com> (raw) see https://github.com/intel/libva/pull/664 Signed-off-by: jianfeng.zheng <jianfeng.zheng@mthreads.com> --- libavcodec/h264_slice.c | 9 ++++++++- libavcodec/vaapi_decode.c | 5 +++++ libavcodec/vaapi_encode_h264.c | 27 ++++++++++++++++++++++----- 3 files changed, 35 insertions(+), 6 deletions(-) diff --git a/libavcodec/h264_slice.c b/libavcodec/h264_slice.c index 7767e16cf1..d05b83a121 100644 --- a/libavcodec/h264_slice.c +++ b/libavcodec/h264_slice.c @@ -809,8 +809,15 @@ static enum AVPixelFormat get_pixel_format(H264Context *h, int force_callback) *fmt++ = AV_PIX_FMT_YUV444P10; } else if (CHROMA422(h)) *fmt++ = AV_PIX_FMT_YUV422P10; - else + else { +#if CONFIG_H264_VAAPI_HWACCEL + // Just add as candidate. Whether VAProfileH264High10 usable or + // not is decided by vaapi_decode_make_config() defined in FFmpeg + // and vaQueryCodingProfile() defined in libva. + *fmt++ = AV_PIX_FMT_VAAPI; +#endif *fmt++ = AV_PIX_FMT_YUV420P10; + } break; case 12: if (CHROMA444(h)) { diff --git a/libavcodec/vaapi_decode.c b/libavcodec/vaapi_decode.c index ab8c12e364..dd55cbd6f1 100644 --- a/libavcodec/vaapi_decode.c +++ b/libavcodec/vaapi_decode.c @@ -398,6 +398,11 @@ static const struct { MAP(MPEG4, MPEG4_ADVANCED_SIMPLE, MPEG4AdvancedSimple), MAP(MPEG4, MPEG4_MAIN, MPEG4Main ), +#if VA_CHECK_VERSION(1, 18, 0) + MAP(H264, H264_HIGH_10_INTRA, + H264High10 ), + MAP(H264, H264_HIGH_10, H264High10 ), +#endif MAP(H264, H264_CONSTRAINED_BASELINE, H264ConstrainedBaseline), MAP(H264, H264_MAIN, H264Main ), diff --git a/libavcodec/vaapi_encode_h264.c b/libavcodec/vaapi_encode_h264.c index 645f6a978d..9ad017d540 100644 --- a/libavcodec/vaapi_encode_h264.c +++ b/libavcodec/vaapi_encode_h264.c @@ -23,6 +23,7 @@ #include "libavutil/avassert.h" #include "libavutil/common.h" +#include "libavutil/pixdesc.h" #include "libavutil/internal.h" #include "libavutil/opt.h" @@ -301,10 +302,21 @@ static int vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) H264RawPPS *pps = &priv->raw_pps; VAEncSequenceParameterBufferH264 *vseq = ctx->codec_sequence_params; VAEncPictureParameterBufferH264 *vpic = ctx->codec_picture_params; + const AVPixFmtDescriptor *desc; + int bit_depth; memset(sps, 0, sizeof(*sps)); memset(pps, 0, sizeof(*pps)); + desc = av_pix_fmt_desc_get(priv->common.input_frames->sw_format); + av_assert0(desc); + if (desc->nb_components == 1 || desc->log2_chroma_w != 1 || desc->log2_chroma_h != 1) { + av_log(avctx, AV_LOG_ERROR, "Chroma format of input pixel format " + "%s is not supported.\n", desc->name); + return AVERROR(EINVAL); + } + bit_depth = desc->comp[0].depth; + sps->nal_unit_header.nal_ref_idc = 3; sps->nal_unit_header.nal_unit_type = H264_NAL_SPS; @@ -314,11 +326,11 @@ static int vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) avctx->profile == FF_PROFILE_H264_MAIN) sps->constraint_set1_flag = 1; - if (avctx->profile == FF_PROFILE_H264_HIGH) + if (avctx->profile == FF_PROFILE_H264_HIGH || avctx->profile == FF_PROFILE_H264_HIGH_10) sps->constraint_set3_flag = ctx->gop_size == 1; if (avctx->profile == FF_PROFILE_H264_MAIN || - avctx->profile == FF_PROFILE_H264_HIGH) { + avctx->profile == FF_PROFILE_H264_HIGH || avctx->profile == FF_PROFILE_H264_HIGH_10) { sps->constraint_set4_flag = 1; sps->constraint_set5_flag = ctx->b_per_p == 0; } @@ -359,6 +371,8 @@ static int vaapi_encode_h264_init_sequence_params(AVCodecContext *avctx) sps->seq_parameter_set_id = 0; sps->chroma_format_idc = 1; + sps->bit_depth_luma_minus8 = bit_depth - 8; + sps->bit_depth_chroma_minus8 = bit_depth - 8; sps->log2_max_frame_num_minus4 = 4; sps->pic_order_cnt_type = ctx->max_b_depth ? 0 : 2; @@ -1144,6 +1158,9 @@ static av_cold int vaapi_encode_h264_configure(AVCodecContext *avctx) } static const VAAPIEncodeProfile vaapi_encode_h264_profiles[] = { +#if VA_CHECK_VERSION(1, 18, 0) + { FF_PROFILE_H264_HIGH_10, 10, 3, 1, 1, VAProfileH264High10 }, +#endif { FF_PROFILE_H264_HIGH, 8, 3, 1, 1, VAProfileH264High }, { FF_PROFILE_H264_MAIN, 8, 3, 1, 1, VAProfileH264Main }, { FF_PROFILE_H264_CONSTRAINED_BASELINE, @@ -1208,10 +1225,9 @@ static av_cold int vaapi_encode_h264_init(AVCodecContext *avctx) av_log(avctx, AV_LOG_ERROR, "H.264 extended profile " "is not supported.\n"); return AVERROR_PATCHWELCOME; - case FF_PROFILE_H264_HIGH_10: case FF_PROFILE_H264_HIGH_10_INTRA: - av_log(avctx, AV_LOG_ERROR, "H.264 10-bit profiles " - "are not supported.\n"); + av_log(avctx, AV_LOG_ERROR, "H.264 high 10 intra profile " + "is not supported.\n"); return AVERROR_PATCHWELCOME; case FF_PROFILE_H264_HIGH_422: case FF_PROFILE_H264_HIGH_422_INTRA: @@ -1304,6 +1320,7 @@ static const AVOption vaapi_encode_h264_options[] = { { PROFILE("constrained_baseline", FF_PROFILE_H264_CONSTRAINED_BASELINE) }, { PROFILE("main", FF_PROFILE_H264_MAIN) }, { PROFILE("high", FF_PROFILE_H264_HIGH) }, + { PROFILE("high10", FF_PROFILE_H264_HIGH_10) }, #undef PROFILE { "level", "Set level (level_idc)", -- 2.25.1 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2023-03-29 8:41 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-03-29 8:41 jianfeng.zheng [this message] 2023-03-31 4:43 ` Xiang, Haihao
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230329084110.200661-1-jianfeng.zheng@mthreads.com \ --to=ggjogh@gmail.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git