From: Devin Heitmueller <devin.heitmueller@ltnglobal.com> To: ffmpeg-devel@ffmpeg.org Cc: Devin Heitmueller <dheitmueller@ltnglobal.com> Subject: [FFmpeg-devel] [RFC PATCH 4/5] tinterlace: Properly preserve CEA-708 closed captions Date: Fri, 17 Mar 2023 16:09:40 -0400 Message-ID: <20230317200941.3936-5-dheitmueller@ltnglobal.com> (raw) In-Reply-To: <20230317200941.3936-1-dheitmueller@ltnglobal.com> Because the interlacing filter halves the effective framerate, we need to ensure that no CEA-708 data is lost as frames are merged. Make use of the new ccfifo mechanism to ensure that caption data is properly preserved as frames pass through the filter. Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com> --- libavfilter/tinterlace.h | 2 ++ libavfilter/vf_tinterlace.c | 10 ++++++++++ 2 files changed, 12 insertions(+) diff --git a/libavfilter/tinterlace.h b/libavfilter/tinterlace.h index 37b6c10c08..30574c2ebf 100644 --- a/libavfilter/tinterlace.h +++ b/libavfilter/tinterlace.h @@ -30,6 +30,7 @@ #include "libavutil/bswap.h" #include "libavutil/opt.h" #include "libavutil/pixdesc.h" +#include "libavutil/ccfifo.h" #include "drawutils.h" #include "avfilter.h" @@ -77,6 +78,7 @@ typedef struct TInterlaceContext { const AVPixFmtDescriptor *csp; void (*lowpass_line)(uint8_t *dstp, ptrdiff_t width, const uint8_t *srcp, ptrdiff_t mref, ptrdiff_t pref, int clip_max); + AVCCFifo *cc_fifo; } TInterlaceContext; void ff_tinterlace_init_x86(TInterlaceContext *interlace); diff --git a/libavfilter/vf_tinterlace.c b/libavfilter/vf_tinterlace.c index 032629279a..260386a889 100644 --- a/libavfilter/vf_tinterlace.c +++ b/libavfilter/vf_tinterlace.c @@ -291,6 +291,9 @@ static int config_out_props(AVFilterLink *outlink) #endif } + if (!(tinterlace->cc_fifo = av_ccfifo_alloc(&outlink->frame_rate, ctx))) + av_log(ctx, AV_LOG_VERBOSE, "Failure to setup CC FIFO queue. Captions will be passed through\n"); + av_log(ctx, AV_LOG_VERBOSE, "mode:%d filter:%s h:%d -> h:%d\n", tinterlace->mode, (tinterlace->flags & TINTERLACE_FLAG_CVLPF) ? "complex" : (tinterlace->flags & TINTERLACE_FLAG_VLPF) ? "linear" : "off", @@ -375,6 +378,8 @@ static int filter_frame(AVFilterLink *inlink, AVFrame *picref) tinterlace->cur = tinterlace->next; tinterlace->next = picref; + av_ccfifo_extract(tinterlace->cc_fifo, picref); + cur = tinterlace->cur; next = tinterlace->next; /* we need at least two frames */ @@ -390,6 +395,7 @@ static int filter_frame(AVFilterLink *inlink, AVFrame *picref) if (!out) return AVERROR(ENOMEM); av_frame_copy_props(out, cur); + av_ccfifo_inject(tinterlace->cc_fifo, out); out->height = outlink->h; out->interlaced_frame = 1; out->top_field_first = 1; @@ -423,6 +429,7 @@ static int filter_frame(AVFilterLink *inlink, AVFrame *picref) if (!out) return AVERROR(ENOMEM); av_frame_copy_props(out, cur); + av_ccfifo_inject(tinterlace->cc_fifo, out); out->height = outlink->h; out->sample_aspect_ratio = av_mul_q(cur->sample_aspect_ratio, av_make_q(2, 1)); @@ -459,6 +466,7 @@ static int filter_frame(AVFilterLink *inlink, AVFrame *picref) if (!out) return AVERROR(ENOMEM); av_frame_copy_props(out, cur); + av_ccfifo_inject(tinterlace->cc_fifo, out); out->interlaced_frame = 1; out->top_field_first = tff; @@ -481,6 +489,7 @@ static int filter_frame(AVFilterLink *inlink, AVFrame *picref) out = av_frame_clone(cur); if (!out) return AVERROR(ENOMEM); + av_ccfifo_inject(tinterlace->cc_fifo, out); out->interlaced_frame = 1; if (cur->pts != AV_NOPTS_VALUE) out->pts = cur->pts*2; @@ -495,6 +504,7 @@ static int filter_frame(AVFilterLink *inlink, AVFrame *picref) if (!out) return AVERROR(ENOMEM); av_frame_copy_props(out, next); + av_ccfifo_inject(tinterlace->cc_fifo, out); out->interlaced_frame = 1; out->top_field_first = !tff; -- 2.35.1.655.ga68dfadae5 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next prev parent reply other threads:[~2023-03-17 20:10 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-03-17 20:09 [FFmpeg-devel] [RFC PATCH 0/5] Properly handle CEA-708 caption data when transcoding Devin Heitmueller 2023-03-17 20:09 ` [FFmpeg-devel] [RFC PATCH 1/5] ccfifo: Properly handle CEA-708 captions through framerate conversion Devin Heitmueller 2023-03-17 20:09 ` [FFmpeg-devel] [RFC PATCH 2/5] vf_fps: properly preserve CEA-708 captions Devin Heitmueller 2023-03-17 20:09 ` [FFmpeg-devel] [RFC PATCH 3/5] yadif: Properly preserve CEA-708 closed captions Devin Heitmueller 2023-03-18 15:48 ` Dennis Mungai 2023-03-18 23:20 ` Devin Heitmueller 2023-03-17 20:09 ` Devin Heitmueller [this message] 2023-03-18 17:12 ` [FFmpeg-devel] [RFC PATCH 4/5] tinterlace: " Thomas Mundt 2023-03-18 23:22 ` Devin Heitmueller 2023-03-19 16:50 ` Thomas Mundt 2023-03-19 17:33 ` Devin Heitmueller 2023-03-17 20:09 ` [FFmpeg-devel] [RFC PATCH 5/5] vf_ccrepack: Add new filter to repack CEA-708 side data Devin Heitmueller 2023-03-17 23:23 ` [FFmpeg-devel] [RFC PATCH 0/5] Properly handle CEA-708 caption data when transcoding BUCCIANTINI Francesco - ADECCO 2023-03-18 23:16 ` Devin Heitmueller
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230317200941.3936-5-dheitmueller@ltnglobal.com \ --to=devin.heitmueller@ltnglobal.com \ --cc=dheitmueller@ltnglobal.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git