From: jackarain <jack.wgm@gmail.com> To: ffmpeg-devel@ffmpeg.org Cc: jackarain <jack.wgm@gmail.com> Subject: [FFmpeg-devel] [PATCH] libavformat/tcp: add local_addr/local_port for network option Date: Tue, 28 Feb 2023 22:24:29 +0800 Message-ID: <20230228142429.3963189-1-jack.wgm@gmail.com> (raw) Signed-off-by: jackarain <jack.wgm@gmail.com> --- doc/protocols.texi | 6 ++++++ libavformat/network.c | 14 +++++++++---- libavformat/network.h | 2 +- libavformat/tcp.c | 48 ++++++++++++++++++++++++++++++++++++++++++- 4 files changed, 64 insertions(+), 6 deletions(-) diff --git a/doc/protocols.texi b/doc/protocols.texi index 21ae6181a0..b3fad55591 100644 --- a/doc/protocols.texi +++ b/doc/protocols.texi @@ -1882,6 +1882,12 @@ The list of supported options follows. Listen for an incoming connection. 0 disables listen, 1 enables listen in single client mode, 2 enables listen in multi-client mode. Default value is 0. +@item local_addr=@var{addr} +Local IP address of a network interface used for tcp socket connect. + +@item local_port=@var{port} +Local port used for tcp socket connect. + @item timeout=@var{microseconds} Set raise error timeout, expressed in microseconds. diff --git a/libavformat/network.c b/libavformat/network.c index 21e20b3e9a..de8b14be82 100644 --- a/libavformat/network.c +++ b/libavformat/network.c @@ -356,7 +356,7 @@ struct ConnectionAttempt { static int start_connect_attempt(struct ConnectionAttempt *attempt, struct addrinfo **ptr, int timeout_ms, URLContext *h, - void (*customize_fd)(void *, int), void *customize_ctx) + int (*customize_fd)(void *, int), void *customize_ctx) { struct addrinfo *ai = *ptr; int ret; @@ -371,8 +371,14 @@ static int start_connect_attempt(struct ConnectionAttempt *attempt, ff_socket_nonblock(attempt->fd, 1); - if (customize_fd) - customize_fd(customize_ctx, attempt->fd); + if (customize_fd) { + ret = customize_fd(customize_ctx, attempt->fd); + if (ret) { + closesocket(attempt->fd); + attempt->fd = -1; + return ret; + } + } while ((ret = connect(attempt->fd, ai->ai_addr, ai->ai_addrlen))) { ret = ff_neterrno(); @@ -402,7 +408,7 @@ static int start_connect_attempt(struct ConnectionAttempt *attempt, int ff_connect_parallel(struct addrinfo *addrs, int timeout_ms_per_address, int parallel, URLContext *h, int *fd, - void (*customize_fd)(void *, int), void *customize_ctx) + int (*customize_fd)(void *, int), void *customize_ctx) { struct ConnectionAttempt attempts[3]; struct pollfd pfd[3]; diff --git a/libavformat/network.h b/libavformat/network.h index 71c49a73fb..8a8cbe672e 100644 --- a/libavformat/network.h +++ b/libavformat/network.h @@ -336,6 +336,6 @@ void ff_log_net_error(void *ctx, int level, const char* prefix); */ int ff_connect_parallel(struct addrinfo *addrs, int timeout_ms_per_address, int parallel, URLContext *h, int *fd, - void (*customize_fd)(void *, int), void *customize_ctx); + int (*customize_fd)(void *, int), void *customize_ctx); #endif /* AVFORMAT_NETWORK_H */ diff --git a/libavformat/tcp.c b/libavformat/tcp.c index a11ccbb913..ceb5a10426 100644 --- a/libavformat/tcp.c +++ b/libavformat/tcp.c @@ -36,6 +36,8 @@ typedef struct TCPContext { const AVClass *class; int fd; int listen; + char *local_port; + char *local_addr; int open_timeout; int rw_timeout; int listen_timeout; @@ -52,6 +54,8 @@ typedef struct TCPContext { #define E AV_OPT_FLAG_ENCODING_PARAM static const AVOption options[] = { { "listen", "Listen for incoming connections", OFFSET(listen), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 2, .flags = D|E }, + { "local_port", "Local port", OFFSET(local_port), AV_OPT_TYPE_STRING, { .str = NULL }, 0, 0, .flags = D|E }, + { "local_addr", "Local address", OFFSET(local_addr), AV_OPT_TYPE_STRING, { .str = NULL }, 0, 0, .flags = D|E }, { "timeout", "set timeout (in microseconds) of socket I/O operations", OFFSET(rw_timeout), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, .flags = D|E }, { "listen_timeout", "Connection awaiting timeout (in milliseconds)", OFFSET(listen_timeout), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, .flags = D|E }, { "send_buffer_size", "Socket send buffer size (in bytes)", OFFSET(send_buffer_size), AV_OPT_TYPE_INT, { .i64 = -1 }, -1, INT_MAX, .flags = D|E }, @@ -70,9 +74,41 @@ static const AVClass tcp_class = { .version = LIBAVUTIL_VERSION_INT, }; -static void customize_fd(void *ctx, int fd) +static int customize_fd(void *ctx, int fd) { TCPContext *s = ctx; + + if (s->local_addr || s->local_port) { + struct addrinfo hints = { 0 }, *ai; + int ret; + + hints.ai_family = AF_UNSPEC; + hints.ai_socktype = SOCK_STREAM; + + ret = getaddrinfo(s->local_addr, s->local_port, &hints, &ai); + if (ret) { + av_log(ctx, AV_LOG_ERROR, + "Failed to getaddrinfo local addr: %s port: %d err: %s\n", + s->local_addr, s->local_port, gai_strerror(ret)); + return ret; + } else { + struct addrinfo *cur_ai = ai; + while (cur_ai) { + ret = bind(fd, (struct sockaddr *)cur_ai->ai_addr, (int)cur_ai->ai_addrlen); + if (ret) + cur_ai = cur_ai->ai_next; + else + break; + } + + if (ret) { + av_log(ctx, AV_LOG_ERROR, + "Failed to bind local addr: %s port: %d err: %s\n", + s->local_addr, s->local_port, gai_strerror(ret)); + return ret; + } + } + } /* Set the socket's send or receive buffer sizes, if specified. If unspecified or setting fails, system default is used. */ if (s->recv_buffer_size > 0) { @@ -97,6 +133,8 @@ static void customize_fd(void *ctx, int fd) } } #endif /* !HAVE_WINSOCK2_H */ + + return 0; } /* return non zero if error */ @@ -129,6 +167,14 @@ static int tcp_open(URLContext *h, const char *uri, int flags) if (buf == endptr) s->listen = 1; } + if (av_find_info_tag(buf, sizeof(buf), "local_port", p)) { + av_freep(&s->local_port); + s->local_port = av_strndup(buf, strlen(buf)); + } + if (av_find_info_tag(buf, sizeof(buf), "local_addr", p)) { + av_freep(&s->local_addr); + s->local_addr = av_strndup(buf, strlen(buf)); + } if (av_find_info_tag(buf, sizeof(buf), "timeout", p)) { s->rw_timeout = strtol(buf, NULL, 10); } -- 2.39.2 _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-request@ffmpeg.org with subject "unsubscribe".
next reply other threads:[~2023-02-28 14:24 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-02-28 14:24 jackarain [this message] -- strict thread matches above, loose matches on Subject: below -- 2023-02-28 10:16 jack 2023-02-28 10:57 ` Nicolas George 2023-02-28 14:27 ` jackarain 2023-02-28 15:44 ` jackarain 2023-03-01 14:44 ` Anton Khirnov 2023-03-01 14:56 ` jackarain 2023-03-01 15:07 ` jackarain 2023-03-01 15:44 ` jackarain 2023-03-02 18:47 ` Rémi Denis-Courmont 2023-03-02 18:51 ` Nicolas George 2023-03-03 9:49 ` jackarain 2023-03-30 10:11 ` Anton Khirnov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230228142429.3963189-1-jack.wgm@gmail.com \ --to=jack.wgm@gmail.com \ --cc=ffmpeg-devel@ffmpeg.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Git Inbox Mirror of the ffmpeg-devel mailing list - see https://ffmpeg.org/mailman/listinfo/ffmpeg-devel This inbox may be cloned and mirrored by anyone: git clone --mirror https://master.gitmailbox.com/ffmpegdev/0 ffmpegdev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 ffmpegdev ffmpegdev/ https://master.gitmailbox.com/ffmpegdev \ ffmpegdev@gitmailbox.com public-inbox-index ffmpegdev Example config snippet for mirrors. AGPL code for this site: git clone https://public-inbox.org/public-inbox.git